Viewer for medical image files
miview [ options ] <image-file>
miview: Viewer for medical image files
File formats are automatically identified by their file extension.
-blowup: Enlarge display size by this factor (default=1) -bright: Relative brightness of display (default=0.0) -color: Use color map to display values -contrast: Relative contrast of display (default=0.0) -dump: Dump all images as bitmap(bmp) files and exit, use the given filename prefix -legend: Export legend as bitmap to this file -low: Lower windowing boundary: This value will appear black in display -map: Load overlay map (colored voxels superimposed on image) from this file -maplegend: Export map legend as bitmap to this file -maplow: Lower windowing boundary for overlay map (default=0.0) -maprect: Relative size of rectangles which represent voxels of the overlay map (default=0.60) -mapupp: Upper windowing boundary for overlay map (default=0.0) -noscale: Disable scale in 2D/3D display -rec: Record clicked coordinates and values into this file -upp: Upper windowing boundary: This value will appear white in display -val: Save value of ROI/point selection to this file -v <loglevel> or <component:loglevel> for debugging/tracing all components or a single component, respectively. Possible values for loglevel are: 0(noLog), 1(errorLog), 2(warningLog), 3(infoLog).
-bonferr: Use Bonferroni correction -corr: Error probability threshold for correlation (default=0.050) -davg: Smooth the design function using a moving average filter of width N (TR) (default=0) -design: Load fMRI design from this file (comma or space separated) -fmask: fMRI mask file -fmri: Load fMRI data from this file -hrf: Convolve design function by hemodynamic response function prior to correlation (see Glover NeuroImage 9, 416-429) -neighb: Minimum next neighbours with significant activation (default=1) -scourse: Dump relative fMRI signal change time course to this file -smap: Dump map of relative fMRI signal change to this file -zmap: Dump z-score map to this file -zscore: z-Score threshold for correlation (default=0.0)
-date: Date of scan [yyyymmdd] (default=20140807yyyymmdd) -fp: FOV in phase direction [mm] (default=220.0mm) -fr: FOV in read direction [mm] (default=220.0mm) -fs: FOV in slice direction [mm] (default=5.0mm) -nr: Number of consecutive measurements (default=1) -nx: Number of points in read direction (default=1) -ny: Number of points in phase direction (default=1) -nz: Number of points in slice direction (default=1) -pbirth: Patients date of birth [yyyymmdd] (default=00000000yyyymmdd) -pid: Unique patient identifier (default=Unknown) -pname: Full patient name (default=Unknown) -psex: Patients sex (options=M F O , default=O) -pweight: Patients weight [kg] (default=50.0kg) -scient: Scientist Name (default=Unknown) -sd: Inter-slice distance (from center to center) [mm] (default=10.0mm) -serd: Series Description (default=Unknown) -serno: Series Number (default=1) -st: Slice thickness [mm] (default=5.0mm) -stud: Study Description (default=Unknown) -tcname: Name of transmit coil (default=Unknown) -te: Time-to-echo of the sequence [ms] (default=80.0ms) -time: Time of scan [hhmmss] (default=090951hhmmss) -tr: Time between consecutive excitations [ms] (default=1000.0ms) -cplx: Treat data as complex and extract the given component (options=none abs pha real imag , default=none) -ds: Dataset index to extract if multiple datasets are read -filter: Read only those datasets which protocol parameter 'key' contains the string 'value' (given in the format 'key=value') -fmap: For reduced memory usage, keep filemapping after reading (raw) data, but writing into the array will result in a crash -jdx: If multiple JDX arrays are present, select this -rdialect: Read data using given dialect of the format. (default is no dialect) -rf: Read format, use it to override file extension (options=autodetect 3db analyze asc coi dat dcm double float gz hdr idx ima interfile jdx mag mhd nii ph png pos pro reg s16bit s32bit s8bit smp u16bit u32bit u8bit , default=autodetect) -skip: Skip this amount of bytes before reading the raw data (default=0)
-align <filename,In-plane blowup factor> : Align data to the geometry (voxel locations) of an external file -automask : Create mask using automatic histogram-based threshold -cluster : Create clusters of non-zero adjacent/next-neighbours voxels, sorted by size -convolve <convolution kernel (Gauss NoFilter Triangle Hann Hamming CosSq Blackman BlackmanNuttall Exp ),kernel diameter [mm]> : Convolution in spatial dimensions -detrend <Number of low frequency components to be removed,Zero mean of resulting timecourse> : Remove slow drift over time -edit <Position/range string in the format (timeframe,slicepos,phasepos,readpos),new value of voxel> : Edit single voxel values -genmask <lower threshold,upper threshold> : Create mask including all voxels with value in given range -isotrop <voxelsize [mm]> : make image voxels isotrop through interpolation (image geometry will not change) -lowpass <Cut-off frequency [Hz]> : Lowpass filtering -max <Maximum value> : Clip all values above maximum value -maxip <direction (time slice phase read none )> : Perform maximum intensity projection over given direction -merge : Merge datasets into a single dataset by expanding the time dimension -min <Minumum value> : Clip all values below mininum value -minip <direction (time slice phase read none )> : Perform minimum intensity projection over given direction -noNaN <Replacement value> : Replaces every NaN by the given value -pflip : Flip data in phase direction -prange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in phase direction -proj <direction (time slice phase read none )> : Perform mean projection over given direction -quantilmask <quantil> : Create mask including all voxels above the given fractional threshold -resample <new size> : Temporal resize of image data -resize <slice-size,phase-size,read-size> : Spatial resize of image data -reslice <requested orientation (sagittal coronal axial )> : reslices the image to a given orientation -rflip : Flip data in read direction -rot <angle [deg],kernel size [pixel]> : In-plane rotation -rrange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in read direction -scale <Slope,Offset> : Rescale image values -sflip : Flip data in slice direction -shift <readDirection shift [pixel],phaseDirection shift [pixel],sliceDirection shift [pixel]> : Shift data spatially -slicetime <space-separated list of slice indices in order of acquisition> : Correct for different acquisition time points of slices -splice <dimension of the data to be spliced (time slice phase read none )> : splices the image in the given direction -srange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in slice direction -swapdim <[rps][-],[rps][-],[rps][-]> : swap/reflect dimensions by specifying a direction triple with optional reflection sign appended -tile <columns> : Combine slices into a square 2D image -trange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in time direction -tshift <time shift [frames]> : Shift data in time -typemax <Datatype> : Clip all values above maximum of a specific datatype -typemin <Datatype> : Clip all values below mininum of a specific datatype -usemask <filename> : Create 1D dataset including all values within mask from file
3db
(Iris3D binary data)
analyze
(NIFTI/ANALYZE, dialects: fsl )
asc
(ASCII, dialects: tcourse )
coi
(JCAMP-DX data sets)
dat
(Matlab ascii 2D data matrix)
dcm
(DICOM, dialects: siemens )
double
(double raw data)
float
(float raw data)
gz
(GNU-Zip container for other formats)
hdr
(Interfile, dialects: neurostat )
hdr
(NIFTI/ANALYZE, dialects: fsl )
idx
(3D-indices of non-zeroes in ASCII)
ima
(DICOM, dialects: siemens )
interfile
(Interfile, dialects: neurostat )
jdx
(JCAMP-DX image format)
mag
(DICOM, dialects: siemens )
mhd
(MetaImage)
nii
(NIFTI/ANALYZE, dialects: fsl )
ph
(DICOM, dialects: siemens )
png
(Portable Network Graphics)
pos
(x-y positions of non-zeroes in ASCII)
pro
(ODIN measurement protocols)
reg
(Ansoft HFSS ASCII)
s16bit
(signed 16 bit raw data)
s32bit
(signed 32 bit raw data)
s8bit
(signed 8 bit raw data)
smp
(JCAMP-DX data sets)
u16bit
(unsigned 16 bit raw data)
u32bit
(unsigned 32 bit raw data)
u8bit
(unsigned 8 bit raw data)