spotread (1)

Measure spot values, Version 1.6.3

spotread [-options][logfile]

-v

Verbose mode

-s

Print spectrum for each reading

-S

Plot spectrum for each reading

-c listno

Set communication port from the following list (default 1)

• ** No ports found **

-t

Use transmission measurement mode

-e

Use emissive measurement mode (absolute results)

-eb

Use display white brightness relative measurement mode

-ew

Use display white point relative chromatically adjusted mode

-p

Use telephoto measurement mode (absolute results)

-pb

Use projector white brightness relative measurement mode

-pw

Use projector white point relative chromatically adjusted mode

-a

Use ambient measurement mode (absolute results)

-f

Use ambient flash measurement mode (absolute results)

-I illum

Set simulated instrument illumination using FWA (def -i illum): M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]

-i illum

Choose illuminant for computation of CIE XYZ from spectral data & FWA: A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp

-Q observ

Choose CIE Observer for spectral data or CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 (Choose FWA during operation)

-F filter

Set filter configuration (if aplicable):

n

None

p

Polarising filter

6

D65

u

U.V. Cut

-E extrafilterfile

Apply extra filter compensation file

-x

Display Yxy instead of Lab

-h

Display LCh instead of Lab

-V

Show running average and std. devation from ref.

-T

Display correlated color temperatures and CRI

-N

Disable auto calibration of instrument

-H

Start in high resolution spectrum mode (if available)

-X file.ccmx

Apply Colorimeter Correction Matrix

-X file.ccss

Use Colorimeter Calibration Spectral Samples for calibration

-Y r|n

Override refresh, non-refresh display mode

-Y R:rate

Override measured refresh rate with rate Hz

-Y A

Use non-adaptive integration time mode (if available).

-W n|h|x

Override serial port flow control: n = none, h = HW, x = Xon/Xoff

-D [level]

Print debug diagnostics to stderr

logfile

Optional file to save reading results as text