VERSION

This documentation refers to Graphics::GnuplotIF version 1.5

SYNOPSIS

  use Graphics::GnuplotIF qw(GnuplotIF);

  my  @x  = ( -2, -1.50, -1, -0.50,  0,  0.50,  1, 1.50, 2 ); # x values
  my  @y1 = (  4,  2.25,  1,  0.25,  0,  0.25,  1, 2.25, 4 ); # function 1
  my  @y2 = (  2,  0.25, -1, -1.75, -2, -1.75, -1, 0.25, 2 ); # function 2

  my  $plot1 = Graphics::GnuplotIF->new(title => "line", style => "points");

  $plot1->gnuplot_plot_y( \@x );                # plot 9 points over 0..8

  $plot1->gnuplot_pause( );                     # hit RETURN to continue

  $plot1->gnuplot_set_title( "parabola" );      # new title
  $plot1->gnuplot_set_style( "lines" );         # new line style

  $plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );   # plot 1: y1, y2 over x
  $plot1->gnuplot_plot_many( \@x, \@y1, \@x, \@y2 ); # plot 1: y1 - x, y2 - x

  my  $plot2  = Graphics::GnuplotIF->new;       # new plot object

  $plot2->gnuplot_set_xrange(  0, 4 );          # set x range
  $plot2->gnuplot_set_yrange( -2, 2 );          # set y range
  $plot2->gnuplot_cmd( "set grid" );            # send a gnuplot command
  $plot2->gnuplot_plot_equation(                # 3 equations in one plot
    "y1(x) = sin(x)",
    "y2(x) = cos(x)",
    "y3(x) = sin(x)/x" );

  $plot2->gnuplot_pause( );                     # hit RETURN to continue

  $plot2->gnuplot_plot_equation(                # rewrite plot 2
    "y4(x) = 2*exp(-x)*sin(4*x)" );

  $plot2->gnuplot_pause( );                     # hit RETURN to continue

  my  $plot3  = GnuplotIF;                      # new plot object

  my    @xyz    = (                             # 2-D-matrix, z-values
    [0,  1,  4,  9],
    [1,  2,  6, 15],
    [4,  6, 12, 27],
    [9, 15, 27, 54],
  );

  $plot3->gnuplot_cmd( "set grid" );            # send a gnuplot command
  $plot3->gnuplot_set_plot_titles("surface");   # set legend
  $plot3->gnuplot_plot_3d( \@xyz );             # start 3-D-plot
  $plot3->gnuplot_pause( );                     # hit RETURN to continue

DESCRIPTION

Graphics::GnuplotIF is a simple and easy to use dynamic Perl interface to gnuplot. gnuplot is a freely available, command-driven graphical display tool for Unix. It compiles and works quite well on a number of Unix flavours as well as other operating systems.

This module enables sending display requests asynchronously to gnuplot through simple Perl subroutine calls.

A gnuplot session is an instance of class Graphics::GnuplotIF. The constructor starts gnuplot as a separate process for each session. The plot commands are send through a pipe. The graphical output from gnuplot will be displayed immediately.

Several independent plots can be started from one script. Each plot has its own pipe. All pipes will be closed automatically by the destructor when the script terminates. The gnuplot processes terminate when the corresponding pipes are closed. Their graphical output will now disappear (but see parameter persist).

Graphics::GnuplotIF is similar to \*(C` gnuplot_i \*(C', a C interface to gnuplot ( http://ndevilla.free.fr/gnuplot/ ), and to \*(C` gnuplot_i++ \*(C', a \*(C+ interface to gnuplot ( http://jijo.cjb.net/code/cc++ ).

SUBROUTINES/METHODS

An object of this class represents an interface to a running gnuplot process. During the creation of an object such an process will be started for each such object. Communication is done through an unidirectional pipe; the resulting stream is write-only.

Most methods return a reference to the Graphics::GnuplotIF object, allowing method calls to be chained like so:

$plot1 -> gnuplot_plot_xy(\@x, \@y) -> gnuplot_reset;

The exception to this are \*(L"gnuplot_get_plotnumber\*(R" and \*(L"gnuplot_get_object_id\*(R", which are used to obtain specific scalar values.

new

The constructor creates a new gnuplot session object, referenced by a handle:

$plot1 = Graphics::GnuplotIF->new( );

A few named arguments can be passed as key - value pairs (here shown with their default values):

style => 'lines', # one of the gnuplot line styles (see below) title => '', # string xlabel => 'x', # string ylabel => 'y', # string xrange => [], # array reference; autoscaling, if empty xrange => [], # array reference; autoscaling, if empty plot_titles => [], # array of strings; titles used in the legend scriptfile => '', # write all plot commands to the specified file plot_also => 0, # write all plot commands to the specified file, # in addition show the plots persist => 0, # let plot windows survive after gnuplot exits # 0 : close / 1 : survive objectname => '', # an optional name for the object silent_pause => 1, # 0 suppress message from gnuplot_pause()

These attributes are stored in each object.

Allowed line styles are

boxes dots filledcurves fsteps histeps impulses lines linespoints points steps

The generated gnuplot commands can be stored to a file instead of beeing executed immediately. This file can be used as input to gnuplot, e.g.

gnuplot < function_set_1.gnuplot

A script file can also be used for checking the commands send to gnuplot.

The objects are automatically deleted by a destructor. The destructor closes the pipe to the gnuplot process belonging to that object. The gnuplot process will also terminate and remove the graphic output. The termination can be controlled by the method \*(C`gnuplot_pause\*(C' .

GnuplotIF

The short form of the constructor above (\*(C`new\*(C'):

use Graphics::GnuplotIF qw(GnuplotIF);

$plot1 = GnuplotIF;

This subroutine is exported only on request.

gnuplot_plot_y

$plot1->gnuplot_plot_y( \@y1, \@y2 );

\*(C`gnuplot_plot_y\*(C' takes one or more array references and plots the values over the x-values 0, 1, 2, 3, ...

gnuplot_plot_xy

$plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

\*(C`gnuplot_plot_xy\*(C' takes two or more array references. The first array is assumed to contain the x-values for the following function values.

gnuplot_plot_xy_style

%y1 = ( 'y_values' => \@y1, 'style_spec' => "lines lw 3" ); %y2 = ( 'y_values' => \@y2, 'style_spec' => "points pointtype 4 pointsize 5" );

$plot1->gnuplot_plot_xy_style( \@x, \%y1, \%y2 );

\*(C`gnuplot_plot_xy_style\*(C' takes one array reference and one or more hash references. The first array is assumed to contain the x-values for the following function values. The following hashes are assumed to contain pairs of y-values and individual style specifications for use in the plot command. The 'style_spec' settings are placed between \*(C`with\*(C' and \*(C`title\*(C' of gnuplot's \*(C`plot\*(C' command.

gnuplot_plot_many

$plot1->gnuplot_plot_xy( \@x1, \@y1, \@x2, \@y2 );

\*(C`gnuplot_plot_many\*(C' takes pairs of array references. Each pair represents a function and is a reference to the arrays of x- and y-values for that function.

gnuplot_plot_many_style

%f1 = ( 'x_values' => \@x1, 'y_values' => \@y1, 'style_spec' => "lines lw 3" ); %f2 = ( 'x_values' => \@x2, 'y_values' => \@y2, 'style_spec' => "points pointtype 4 pointsize 5" );

$plot1->gnuplot_plot_many_style( \%f1, \%f2 );

\*(C`gnuplot_plot_many_style\*(C' takes one or more hash references. The hashes are assumed to contain array referenses to x-values and y-values and individual style specifications for use in the plot command. The 'style_spec' settings are placed between \*(C`with\*(C' and \*(C`title\*(C' of gnuplot's \*(C`plot\*(C' command.

gnuplot_plot_equation

$plot2->gnuplot_plot_equation( # 3 equations in one plot "y1(x) = sin(x)", "y2(x) = cos(x)", "y3(x) = sin(x)/x" );

\*(C`gnuplot_plot_equation\*(C' takes one or more gnuplot function descriptions as strings. The plot ranges can be controlled by \*(C`gnuplot_set_xrange\*(C' and \*(C`gnuplot_set_yrange\*(C' .

gnuplot_plot_3d

$plot2->gnuplot_plot_3d( \@array ); # 3-D-plot

\*(C`gnuplot_plot_3d\*(C' takes one reference to an 2-D-array of z-values.

gnuplot_pause

$plot1->gnuplot_pause( [time] [,text] );

This is an emulation of the gnuplot \*(C`pause\*(C' command. It displays any text associated with the command and waits a specified amount of time or until the carriage return is pressed. The message can be suppressed by

silent_pause => 0

given to the constructor (see new ).

\*(C`time\*(C' may be any constant or expression. Choosing 0 (default) will wait until a carriage return is hit, a negative value won't pause at all, and a positive number will wait the specified number of seconds.

The time value and the text are stored in the object and reused. A sequence like

$plot1->gnuplot_plot_y( \@y1 ); $plot1->gnuplot_pause( 5.5 ); # delay is 5.5 seconds

$plot1->gnuplot_plot_y( \@y2 ); $plot1->gnuplot_pause( );

$plot1->gnuplot_plot_y( \@y3 ); $plot1->gnuplot_pause( );

will display 3 plots with 5.5 seconds delay.

gnuplot_cmd

$plot2->gnuplot_cmd( 'set grid', 'set timestamp "%d/%m/%y %H:%M" 0,0 "Helvetica"' );

\*(C`gnuplot_cmd\*(C' can be used to send one or more gnuplot commands, especially those not wrapped by a Graphics::GnuplotIF method.

gnuplot_reset

$plot1->gnuplot_reset();

Set all options set with the \*(C`set\*(C' command to their gnuplot default values.

gnuplot_set_style

$plot1->gnuplot_set_style( "steps" ); # new line style

Sets one of the allowed line styles (see new ) in a plot command.

gnuplot_set_title

$plot1->gnuplot_set_title("parabola"); # new title

Sets the plot title. Equivalent to the gnuplot command \*(C`set title "parabola"\*(C'.

gnuplot_set_xlabel

$plot1->gnuplot_set_xlabel("time (days)");

Sets the x axis label. Equivalent to the gnuplot command \*(C`set xlabel "time (days)"\*(C'.

gnuplot_set_ylabel

$plot1->gnuplot_set_ylabel("bugs fixed");

Sets the y axis label. Equivalent to the gnuplot command \*(C`set ylabel "bugs fixed"\*(C'.

gnuplot_set_xrange

$plot1->gnuplot_set_xrange( left, right );

Sets the horizontal range that will be displayed. Equivalent to the gnuplot command \*(C`set xrange [left:right]\*(C'.

gnuplot_set_yrange

$plot1->gnuplot_set_yrange( low, high );

Sets the vertical range that will be displayed. Equivalent to the gnuplot command \*(C`set yrange [low:high]\*(C'.

gnuplot_set_plot_titles

$plot1->gnuplot_set_plot_titles( @ytitles );

Sets the list of titles used in the key for each of the y-coordinate data sets specified in subsequent calls to gnuplot_plot_xy or gnuplot_plot_y commands. This is not equivalent to a complete gnuplot command; rather it adds a \*(C`title\*(C' clause to each data set specified in a gnuplot \*(C`plot\*(C' command.

gnuplot_hardcopy

\*(C`gnuplot_cmd\*(C' can be used to write a plot into a file or make a printable file by setting/resetting the terminal and the output file:

$plot1->gnuplot_hardcopy( 'function1.gnuplot.ps', 'postscript', 'color lw 3' );

$plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

$plot1->gnuplot_restore_terminal();

The 1. parameter is a file name, the 2. parameter is a gnuplot terminal type, the 3. parameter is a string with additional terminal parameters (optional). The current terminal settings will be saved.

gnuplot_restore_terminal

Restores the saved terminal settings after a call to \*(C`gnuplot_hardcopy()\*(C'. Output will go to \*(C`STDOUT\*(C' again.

Print a plot directly

A hardcopy can be made with an appropriate output format and a pipe to a printer:

$plot1->gnuplot_cmd( 'set terminal postscript', 'set output " | lpr " ' );

$plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

$plot1->gnuplot_cmd( 'set output', 'set terminal x11' );

gnuplot_get_object_id

Get the (internal) object number (and the object name):

$obj_number = $plot1->gnuplot_get_object_id(); ($obj_number, $obj_name) = $plot1->gnuplot_get_object_id();

The object number is set automatically by the constructor. The object name can be set by the constructor (objectname => 'MyName').

gnuplot_get_plotnumber

Get the (internal) plot number of the next plot:

$plot_number = $plot1->gnuplot_get_plotnumber()

The plot number is set automatically by the constructor starting with 1. Each call to

gnuplot_plot_y gnuplot_plot_xy gnuplot_plot_xy_style gnuplot_plot_many gnuplot_plot_many_style gnuplot_plot_equation gnuplot_plot_3d

increments this number by 1. This can be used to identify single plots, e.g. with

$plot->gnuplot_cmd( "set timestamp \"plot number ${plot_number} / %c\"" );

EXPORTS

GnuplotIF constructor, short form (see \*(C`GnuplotIF\*(C' ).

DIAGNOSTICS

Dialog messages and diagnostic messages start with \*(C` Graphics::GnuplotIF (object NR): ... \*(C' .

\*(C`NR\*(C' is the number of the corresponding Graphics::GnuplotIF object and output stream. \s-1NR\s0 counts the objects in the order of their generation.

The gnuplot messages going to \s-1STDERR\s0 will be redirected to the file \*(C`.gnuplot.PPP.OOO.stderr.log\*(C'. \s-1PPP\s0 is the process number, \s-1OOO\s0 is the number of the plot object (see \*(C`gnuplot_get_object_id\*(C').

CONFIGURATION AND ENVIRONMENT

The environment variable \s-1DISPLAY\s0 is checked for the display.

DEPENDENCIES

  • \*(C`gnuplot\*(C' ( http://sourceforge.net/projects/gnuplot ) must be installed.

  • The module \*(C`Carp\*(C' is used for error handling.

  • The module \*(C`IO::Handle\*(C' is used to handle output pipes. Your operating system must support pipes, of course.

INCOMPATIBILITIES

There are no known incompatibilities.

BUGS AND LIMITATIONS

$plot1->gnuplot_cmd("pause -1"); # send the gnuplot pause command

does not work. Use

$plot1->gnuplot_pause( );

There are no known bugs in this module. Please report problems to author. Patches are welcome.

AUTHOR

Dr.-Ing. Fritz Mehner ([email protected])

CREDITS

Stephen Marshall (smarshall at wsi dot com) contributed \*(C`gnuplot_set_plot_titles\*(C'.

Georg Bauhaus (bauhaus at futureapps dot de) contributed \*(C`gnuplot_plot_xy_style\*(C'.

Bruce Ravel (bravel at bnl dot gov) contributed \*(C`gnuplot_plot_many\*(C' and \*(C`gnuplot_plot_many_style\*(C' and made method calls chainable.

LICENSE AND COPYRIGHT

Copyright (C) 2005-2008 by Fritz Mehner

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perldoc perlartistic. This program is distributed in the hope that it will be useful, but \s-1WITHOUT\s0 \s-1ANY\s0 \s-1WARRANTY\s0; without even the implied warranty of \s-1MERCHANTABILITY\s0 or \s-1FITNESS\s0 \s-1FOR\s0 A \s-1PARTICULAR\s0 \s-1PURPOSE\s0.

RELATED TO Graphics::GnuplotIF…

gnuplot(1).