SYNOPSIS

  use HTML::ElementTable;
  # Create a table 0..10 x 0..12
  $t = new HTML::ElementTable maxrow => 10, maxcol => 12;

  # Populate cells with coordinates
  $t->table->push_position;

  # Manipulate <TABLE> tag
  $t->attr('cellspacing',0);
  $t->attr('border',1);
  $t->attr('bgcolor','#DDBB00');

  # Manipulate entire table - optimize on <TR> or pass to all <TD>
  $t->table->attr('align','left');
  $t->table->attr('valign','top');

  # Manipulate rows (optimizes on <TR> if possible)
  $t->row(0,2,4,6)->attr('bgcolor','#9999FF');

  # Manipulate columns (all go to <TD> tags within column)
  $t->col(0,4,8,12)->attr('bgcolor','#BBFFBB');

  # Manipulate boxes (all go to <TD> elements
  # unless it contains full rows, then <TR>)
  $t->box(7,1 => 10,3)->attr('bgcolor','magenta');
  $t->box(7,7 => 10,5)->attr('bgcolor','magenta');
  $t->box(8,9 => 9,11)->attr('bgcolor','magenta');
  $t->box(7,10 => 10,10)->attr('bgcolor','magenta');

  # individual <TD> or <TH> attributes
  $t->cell(8,6)->attr('bgcolor','#FFAAAA');
  $t->cell(9,6)->attr('bgcolor','#FFAAAA');
  $t->cell(7,9, 10,9, 7,11, 10,11)->attr('bgcolor','#FFAAAA');

  # Take a look
  print $t->as_HTML;

DESCRIPTION

HTML::ElementTable provides a highly enhanced HTML::ElementSuper structure with methods designed to easily manipulate table elements by using coordinates. Elements can be manipulated in bulk by individual cells, arbitrary groupings of cells, boxes, columns, rows, or the entire table.

PUBLIC METHODS

Table coordinates start at 0,0 in the upper left cell.

\s-1CONSTRUCTORS\s0

new()
new(maxrow => row, maxcol => col)

Return a new HTML::ElementTable object. If the number of rows and columns were provided, all elements required for the rows and columns will be initialized as well. See extent().

new_from_tree($tree)

Takes an existing top-level HTML::Element representing a table and converts the entire table structure into a cohesive HTML::ElementTable construct. (this is potentially useful if you want to use the power of this module for editing \s-1HTML\s0 tables in situ within an HTML::Element tree).

\s-1TABLE\s0 \s-1CONFIGURATION\s0

extent()
extent(maxrow, maxcolumn)

Set or return the extent of the current table. The maxrow and maxcolumn parameters indicate the maximum row and column coordinates you desire in the table. These are the coordinates of the lower right cell in the table, starting from (0,0) at the upper left. Providing a smaller extent than the current one will shrink the table with no ill effect, provided you do not mind losing the information in the clipped cells.

maxrow()

Set or return the coordinate of the last row.

maxcol()

Set or return the coordinate of the last column.

\s-1ELEMENT\s0 \s-1ACCESS\s0

Unless accessing a single element, most table element access is accomplished through globs, which are collections of elements that behave as if they were a single element object.

Whenever possible, globbed operations are optimized into the most appropriate element. For example, if you set an attribute for a row glob, the attribute will be set either on the <\s-1TR\s0> element or the collected <\s-1TD\s0> elements, whichever is appropriate.

See HTML::ElementGlob\|(3) for more information on element globs.

cell(row,col,[row2,col2],[...])

Access an individual cell or collection of cells by their coordinates.

row(row,[row2,...])

Access the contents of a row or collection of rows by row coordinate.

col(col,[col2,...])

Access the contents of a column or collection of columns by column coordinate.

box(row_a1,col_a1,row_a2,col_a2,[row_b1,col_b1,row_b2,col_b2],[...])

Access the contents of a span of cells, specified as a box consisting of two sets of coordinates. Multiple boxes can be specified.

table()

Access all cells in the table. This is different from manipulating the table object itself, which is reserved for such things as \s-1CELLSPACING\s0 and other attributes specific to the <\s-1TABLE\s0> tag. However, since table() returns a glob of cells, if the attribute is more appropriate for the top level <\s-1TABLE\s0> tag, it will be placed there rather than in each <\s-1TR\s0> tag or every <\s-1TD\s0> tag.

\s-1ELEMENT/GLOB\s0 \s-1METHODS\s0

The interfaces to a single table element or a glob of elements are identical. All methods available from the HTML::ElementSuper class are also available to a table element or glob of elements. See HTML::ElementSuper\|(3) for details on these methods.

Briefly, here are some of the more useful methods provided by HTML::ElementSuper:

attr()
push_content()
replace_content()
wrap_content()
clone([element])
mask([mode])

\s-1TABLE\s0 \s-1SPECIFIC\s0 \s-1EXTENSIONS\s0

blank_fill([mode])

Set or return the current fill mode for blank cells. The default is 0 for HTML::Element::Table elements. When most browsers render tables, if they are empty you will get a box the color of your browser background color rather than the \s-1BGCOLOR\s0 of that cell. When enabled, empty cells are provided with an ' ', or invisible content, which will trigger the rendering of the \s-1BGCOLOR\s0 for that cell.

NOTES ON GLOBS

Globbing was a convenient way to treat arbitrary collections of table cells as if they were a single \s-1HTML\s0 element. Methods are generally passed blindly and sequentially to the elements they contain.

Most of the time, this is fairly intuitive, such as when you are setting the attributes of the cells.

Other times, it might be problematic, such as with push_content(). Do you push the same object to all of the cells? HTML::Element based classes only support one parent, so this breaks if you try to push the same element into multiple parental hopefuls. In the specific case of push_content() on globs, the elements that eventually get pushed are clones of the originally provided content. It works, but it is not necessarily what you expect. An incestuous \s-1HTML\s0 element tree is probably not what you want anyway.

See HTML::ElementGlob\|(3) for more details on how globs work.

REQUIRES

HTML::ElementSuper, HTML::ElementGlob

AUTHOR

Matthew P. Sisk, <[email protected]>

ACKNOWLEDGEMENTS

Thanks to William R. Ward for some conceptual nudging.

COPYRIGHT

Copyright (c) 1998-2010 Matthew P. Sisk. All rights reserved. All wrongs revenged. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

RELATED TO HTML::ElementTable…

A useful page of HTML::ElementTable examples can be found at http://www.mojotoad.com/sisk/projects/HTML-Element-Extended/examples.html.

HTML::ElementSuper\|(3), HTML::ElementGlob\|(3), HTML::Element\|(3), HTML::TableExtract\|(3), perl\|(1).