SYNOPSIS

SUBROUTINE PCLAPIV(

DIREC, ROWCOL, PIVROC, M, N, A, IA, JA, DESCA, IPIV, IP, JP, DESCIP, IWORK )

CHARACTER*1

DIREC, PIVROC, ROWCOL

INTEGER

IA, IP, JA, JP, M, N

INTEGER

DESCA( * ), DESCIP( * ), IPIV( * ), IWORK( * )

COMPLEX

A( * )

PURPOSE

PCLAPIV applies either P (permutation matrix indicated by IPIV) or inv( P ) to a general M-by-N distributed matrix sub( A ) = A(IA:IA+M-1,JA:JA+N-1), resulting in row or column pivoting. The pivot vector may be distributed across a process row or a column. The pivot vector should be aligned with the distributed matrix A. This routine will transpose the pivot vector if necessary. For example if the row pivots should be applied to the columns of sub( A ), pass ROWCOL='C' and PIVROC='C'.

Notes

=====

Each global data object is described by an associated description vector. This vector stores the information required to establish the mapping between an object element and its corresponding process and memory location.

Let A be a generic term for any 2D block cyclicly distributed array. Such a global array has an associated description vector DESCA. In the following comments, the character _ should be read as "of the global array".

NOTATION STORED IN EXPLANATION

--------------- -------------- -------------------------------------- DTYPE_A(global) DESCA( DTYPE_ )The descriptor type. In this case,

                               DTYPE_A = 1.

CTXT_A (global) DESCA( CTXT_ ) The BLACS context handle, indicating

                               the BLACS process grid A is distribu-
                               ted over. The context itself is glo-
                               bal, but the handle (the integer
                               value) may vary.

M_A (global) DESCA( M_ ) The number of rows in the global

                               array A.

N_A (global) DESCA( N_ ) The number of columns in the global

                               array A.

MB_A (global) DESCA( MB_ ) The blocking factor used to distribute

                               the rows of the array.

NB_A (global) DESCA( NB_ ) The blocking factor used to distribute

                               the columns of the array.

RSRC_A (global) DESCA( RSRC_ ) The process row over which the first

                               row of the array A is distributed.

CSRC_A (global) DESCA( CSRC_ ) The process column over which the

                               first column of the array A is
                               distributed.

LLD_A (local) DESCA( LLD_ ) The leading dimension of the local

                               array.  LLD_A >= MAX(1,LOCr(M_A)).

Let K be the number of rows or columns of a distributed matrix, and assume that its process grid has dimension p x q.

LOCr( K ) denotes the number of elements of K that a process would receive if K were distributed over the p processes of its process column.

Similarly, LOCc( K ) denotes the number of elements of K that a process would receive if K were distributed over the q processes of its process row.

The values of LOCr() and LOCc() may be determined via a call to the ScaLAPACK tool function, NUMROC:

        LOCr( M ) = NUMROC( M, MB_A, MYROW, RSRC_A, NPROW ),
        LOCc( N ) = NUMROC( N, NB_A, MYCOL, CSRC_A, NPCOL ).

An upper bound for these quantities may be computed by:

        LOCr( M ) <= ceil( ceil(M/MB_A)/NPROW )*MB_A
        LOCc( N ) <= ceil( ceil(N/NB_A)/NPCOL )*NB_A

Restrictions

============

IPIV must always be a distributed vector (not a matrix). Thus: IF( ROWPIV .EQ. 'C' ) THEN

   JP must be 1

ELSE

   IP must be 1

END IF

The following restrictions apply when IPIV must be transposed: IF( ROWPIV.EQ.'C' .AND. PIVROC.EQ.'C') THEN

    DESCIP(MB_) must equal DESCA(NB_)

ELSE IF( ROWPIV.EQ.'R" .AND. PIVROC.EQ.'R') THEN

    DESCIP(NB_) must equal DESCA(MB_)

END IF

ARGUMENTS

DIREC (global input) CHARACTER*1

Specifies in which order the permutation is applied: = 'F' (Forward) Applies pivots Forward from top of matrix. Computes P*sub( A ). = 'B' (Backward) Applies pivots Backward from bottom of matrix. Computes inv( P )*sub( A ).

ROWCOL (global input) CHARACTER*1

Specifies if the rows or columns are to be permuted: = 'R' Rows will be permuted, = 'C' Columns will be permuted.

PIVROC (global input) CHARACTER*1

Specifies whether IPIV is distributed over a process row or column: = 'R' IPIV distributed over a process row = 'C' IPIV distributed over a process column

M (global input) INTEGER

The number of rows to be operated on, i.e. the number of rows of the distributed submatrix sub( A ). M >= 0.

N (global input) INTEGER

The number of columns to be operated on, i.e. the number of columns of the distributed submatrix sub( A ). N >= 0.

A (local input/local output) COMPLEX pointer into the

local memory to an array of dimension (LLD_A, LOCc(JA+N-1)). On entry, this array contains the local pieces of the distributed submatrix sub( A ) to which the row or column interchanges will be applied. On exit, the local pieces of the permuted distributed submatrix.

IA (global input) INTEGER

The row index in the global array A indicating the first row of sub( A ).

JA (global input) INTEGER

The column index in the global array A indicating the first column of sub( A ).

DESCA (global and local input) INTEGER array of dimension DLEN_.

The array descriptor for the distributed matrix A.

IPIV (local input) INTEGER array, dimension >= LOCr(M_A)+MB_A

if ROWCOL='R', otherwise LOCc(N_A)+NB_A. It contains the pivoting information. IPIV(i) is the global row (column), local row (column) i was swapped with. The last piece of the array of size MB_A (resp. NB_A) is used as workspace. This array is tied to the distributed matrix A.

IWORK (local workspace) INTEGER array, dimension (LDW)

where LDW is equal to the workspace necessary for transposition, and the storage of the tranposed IPIV:

Let LCM be the least common multiple of NPROW and NPCOL. IF( ROWCOL.EQ.'R' .AND. PIVROC.EQ.'R' ) THEN IF( NPROW.EQ.NPCOL ) THEN LDW = LOCr( N_P + MOD(JP-1, NB_P) ) + NB_P ELSE LDW = LOCr( N_P + MOD(JP-1, NB_P) ) + NB_P * CEIL( CEIL(LOCc(N_P)/NB_P) / (LCM/NPCOL) ) END IF ELSE IF( ROWCOL.EQ.'C' .AND. PIVROC.EQ.'C' ) THEN IF( NPROW.EQ.NPCOL ) THEN LDW = LOCc( M_P + MOD(IP-1, MB_P) ) + MB_P ELSE LDW = LOCc( M_P + MOD(IP-1, MB_P) ) + MB_P * CEIL( CEIL(LOCr(M_P)/MB_P) / (LCM/NPROW) ) END IF ELSE IWORK is not referenced. END IF