SYNOPSIS

aoe-revalidate e{major}.{minor}

DESCRIPTION

The aoe-revalidate command tells the aoe driver to revalidate the disk size of an open aoe device. Normally the aoe driver will only acknowledge changes in an aoe device's disk size when the aoe device is not open.

It should be noted that if an aoe device's disk size shrinks in revalidation any users may become hopelessly confused when their resumed I/O starts to fail.

EXAMPLE

nai# aoe-stat | grep e1.9
     e1.9        82.348GB   eth0 up
nai# < /dev/etherd/e1.9 sleep 600 &
[1] 13006
nai# aoe-revalidate e1.9
nai# aoe-stat | grep e1.9
     e1.9       164.696GB   eth0 up

RELATED TO aoe-revalidate…

aoe-stat(8), aoetools(8).

AUTHOR

Sam Hopkins ([email protected])