pxfw (8)

pxfw -l

pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]

pxfw -d DEVICE [-e] [-r] [-t] [-v]

pxfw is the linux firmware flasher for Plextor CD and DVD drives. Remove any disks before flashing.

You can flash the firmware of these drives:

Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.

can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.

Linux:

/dev/hdX: IDE device

/dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation

/dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device

OpenBSD/NetBSD:

/dev/rcdX

FreeBSD:

/dev/cd: SCSI device

/dev/acd: ATA device

MacOS X:

/dev/disk:

win32:

C:,D:,E:, ... X:,Y:,Z:

-l scan busses for all available CD and DVD devices

-if select inputfile. Specify the firmware binary file, which should

     be written to DEVICE.

-u proceed update. When the firmware checksum test has succeeded,

     write firmware to DEVICE.

-f force flashing. Even if DEVICE is not recognized, or firmware.

     checksum has failed, firmware writing will be forced.

     Handle with care.

-e read EEPROM from DEVICE.

-r reboot the device.

-t test which opcodes are supported by the device.

-v debug.

pxfw -d /dev/hdc -if 755_1.07.bin -u

writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.

pxfw -d /dev/sr3 -e -oe file.foo

reades EEPROM from device /dev/sr3 and writes it to file.foo. please report man page improvements to [email protected]