SYNOPSIS

splash \,file1 file2 file3\/...

DESCRIPTION

SPLASH: A visualisation tool for SPH data (c)2004-2014 Daniel Price v2.5.0 [22nd Aug. 2014]

Usage with flags: splash [-p fileprefix] [-d defaultsfile] [-l limitsfile] [-ev] [-lowmem] [-o format] [-x col] [-y col] [-render col] [-cont col] file1 file2 ...

Command line options:

-p fileprefix

: change prefix to ALL settings files read/written by splash

-d defaultsfile

: change name of defaults file read/written by splash

-l limitsfile

: change name of limits file read/written by splash

-e, -ev

: use default options best suited to ascii evolution files (ie. energy vs time)

-lm, -lowmem

: use low memory mode [applies only to sphNG data read at present]

-o pixformat

: dump pixel map in specified format (use just -o for list of formats)

Command line plotting mode:

-x column

: specify x plot on command line (ie. do not prompt for x)

-y column

: specify y plot on command line (ie. do not prompt for y)

-r[ender] column

: specify rendered quantity on command line (ie. no render prompt) (will take columns 1 and 2 as x and y if -x and/or -y not specified)

-vec[tor] column

: specify vector plot quantity on command line (ie. no vector prompt) -c[ontour] column : specify contoured quantity on command line (ie. no contour prompt)

-dev device

: specify plotting device on command line (ie. do not prompt)

  • convert mode ("splash to X dumpfiles"): splash to ascii : convert SPH data to ascii file dumpfile.ascii

to binary

: convert SPH data to simple unformatted binary dumpfile.binary

write(1) time,npart,ncolumns

do i=1,npart

write(1) dat(1:ncolumns),itype

enddo

  • to phantom : convert SPH data to binary dump file for PHANTOM to gadget : convert SPH data to default GADGET snapshot file format

  • Grid conversion mode ("splash to X dumpfiles"):

splash to grid

: interpolate basic SPH data (density, plus velocity if present in data)

  • to 2D or 3D grid, write grid data to file (using default output=ascii)

to gridascii

: as above, grid data written in ascii format

to gridascii2

: grid data written in ascii format, all in one file

to gridbinary

: as above, grid data in simple unformatted binary format:

write(unit) nx,ny,nz,ncolumns,time

[ 4 bytes each ]

write(unit) (((rho(i,j,k),i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((vx(i,j,k), i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((vy(i,j,k), i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((...(i,j,k),i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

allto grid

: as above, interpolating *all* columns to the grid (and output file)

allto gridascii

: as above, with ascii output

allto gridbinary

: as above, with binary output

  • Analysis mode ("splash calc X dumpfiles") on a sequence of dump files:

splash calc energies

: calculate KE,PE,total energy vs time

  • output to file called 'energy.out'

calc massaboverho : mass above a series of density thresholds vs time

output to file called 'massaboverho.out'

calc max

: maximum of each column vs. time

  • output to file called 'maxvals.out'

calc min

: minimum of each column vs. time

  • output to file called 'minvals.out'

calc diff

: (max - min) of each column vs. time

  • output to file called 'diffvals.out'

calc amp

: 0.5*(max - min) of each column vs. time

  • output to file called 'ampvals.out'

calc mean

: mean of each column vs. time

  • output to file called 'meanvals.out'

calc rms

: (mass weighted) root mean square of each column vs. time

  • output to file called 'rmsvals.out'

  • the above options all produce a small ascii file with one row per input file. the following option produces a file equivalent in size to one input file (in ascii format):

calc timeaverage

: time average of *all* entries for every particle

  • output to file called 'time_average.out'

calc ratio

: ratio of *all* entries in each file compared to first

  • output to file called 'ratio.out'

  • Basic splash usage is explained in the userguide,

  • located in the directory splash/docs/splash.pdf

v2.5.0 [22nd Aug. 2014]

Usage: splash file1 file2 file3...

Usage with flags: splash [-p fileprefix] [-d defaultsfile] [-l limitsfile] [-ev] [-lowmem] [-o format] [-x col] [-y col] [-render col] [-cont col] file1 file2 ...

Command line options:

-p fileprefix

: change prefix to ALL settings files read/written by splash

-d defaultsfile

: change name of defaults file read/written by splash

-l limitsfile

: change name of limits file read/written by splash

-e, -ev

: use default options best suited to ascii evolution files (ie. energy vs time)

-lm, -lowmem

: use low memory mode [applies only to sphNG data read at present]

-o pixformat

: dump pixel map in specified format (use just -o for list of formats)

Command line plotting mode:

-x column

: specify x plot on command line (ie. do not prompt for x)

-y column

: specify y plot on command line (ie. do not prompt for y)

-r[ender] column

: specify rendered quantity on command line (ie. no render prompt) (will take columns 1 and 2 as x and y if -x and/or -y not specified)

-vec[tor] column

: specify vector plot quantity on command line (ie. no vector prompt) -c[ontour] column : specify contoured quantity on command line (ie. no contour prompt)

-dev device

: specify plotting device on command line (ie. do not prompt)

  • convert mode ("splash to X dumpfiles"): splash to ascii : convert SPH data to ascii file dumpfile.ascii

to binary

: convert SPH data to simple unformatted binary dumpfile.binary

write(1) time,npart,ncolumns

do i=1,npart

write(1) dat(1:ncolumns),itype

enddo

  • to phantom : convert SPH data to binary dump file for PHANTOM to gadget : convert SPH data to default GADGET snapshot file format

  • Grid conversion mode ("splash to X dumpfiles"):

splash to grid

: interpolate basic SPH data (density, plus velocity if present in data)

  • to 2D or 3D grid, write grid data to file (using default output=ascii)

to gridascii

: as above, grid data written in ascii format

to gridascii2

: grid data written in ascii format, all in one file

to gridbinary

: as above, grid data in simple unformatted binary format:

write(unit) nx,ny,nz,ncolumns,time

[ 4 bytes each ]

write(unit) (((rho(i,j,k),i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((vx(i,j,k), i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((vy(i,j,k), i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

write(unit) (((...(i,j,k),i=1,nx),j=1,ny),k=1,nz)

[ 4 bytes each ]

allto grid

: as above, interpolating *all* columns to the grid (and output file)

allto gridascii

: as above, with ascii output

allto gridbinary

: as above, with binary output

  • Analysis mode ("splash calc X dumpfiles") on a sequence of dump files:

splash calc energies

: calculate KE,PE,total energy vs time

  • output to file called 'energy.out'

calc massaboverho : mass above a series of density thresholds vs time

output to file called 'massaboverho.out'

calc max

: maximum of each column vs. time

  • output to file called 'maxvals.out'

calc min

: minimum of each column vs. time

  • output to file called 'minvals.out'

calc diff

: (max - min) of each column vs. time

  • output to file called 'diffvals.out'

calc amp

: 0.5*(max - min) of each column vs. time

  • output to file called 'ampvals.out'

calc mean

: mean of each column vs. time

  • output to file called 'meanvals.out'

calc rms

: (mass weighted) root mean square of each column vs. time

  • output to file called 'rmsvals.out'

  • the above options all produce a small ascii file with one row per input file. the following option produces a file equivalent in size to one input file (in ascii format):

calc timeaverage

: time average of *all* entries for every particle

  • output to file called 'time_average.out'

calc ratio

: ratio of *all* entries in each file compared to first

  • output to file called 'ratio.out'

unknown command line argument '--version'

RELATED TO rsplash…

The full documentation for SPLASH: is maintained as a Texinfo manual. If the info and SPLASH: programs are properly installed at your site, the command

  • info SPLASH:

should give you access to the complete manual.