Configure/kill running ax.25 connections.
axctl [-v] port dest src window|t1|t2|t3|n2|idle|paclen|kill [parm]
The axctl command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol layer for existing AX.25 connections. The connection is uniquely identified via the combination of port, destination callsign and source callsign, with that information the kernel is able to change the parameters, or abort the connection.
Many of the options are similar to those found in axparms and perform the same function. Only one parameter may be changed on each invocation of axctl.
Displays the version number.
Sets the window size for the AX.25 connection.
Sets the initial T1 timeout value for the AX.25 connection, the value is given in seconds.
Sets the T2 timeout value for the AX.25 connection, the value is given in seconds.
Sets the T3 timeout value for the AX.25 connected, the value is given in seconds.
Sets the maximum number of tries for the AX.25 connection.
Sets the value for the idle timer for the AX.25 connection, the value is in minutes.
Sets the maximum packet length that may be transmitted on the AX.25 connection.
Will abort an existing AX.25 connection.
Joerg Reuter DL1BKE <[email protected]>