Linux Man Pages - Kernel routines

linux-manual-3.16 / DECLARE_COMPLETION(9): Declare and initialize a completion structure
linux-manual-3.16 / DECLARE_COMPLETION_ONSTACK(9): Declare and initialize a completion structure
linux-manual-3.16 / DECLARE_KFIFO(9): Macro to declare a fifo object
linux-manual-3.16 / DECLARE_KFIFO_PTR(9): Macro to declare a fifo pointer object
linux-manual-3.16 / DEFINE_KFIFO(9): Macro to define and initialize a fifo
linux-manual-3.16 / GetIoUnitPage2(9): Retrieve bios version and boot order information.
linux-manual-3.16 / GetIocFacts(9): Send iocfacts request to mpt adapter.
linux-manual-3.16 / GetLanConfigPages(9): Fetch lanconfig pages.
linux-manual-3.16 / GetPortFacts(9): Send portfacts request to mpt adapter.
linux-manual-3.16 / I2C_BOARD_INFO(9): Macro used to list an i2c device and its address
linux-manual-3.16 / INIT_KFIFO(9): Initialize a fifo declared by declare_kfifo
linux-manual-3.16 / KickStart(9): Perform hard reset of mpt adapter.
linux-manual-3.16 / MakeIocReady(9): Get ioc to a ready state, using kickstart if needed.
linux-manual-3.16 / MptDisplayIocCapabilities(9): Disply iocs capabilities.
linux-manual-3.16 / PrimeIocFifos(9): Initialize ioc request and reply fifos.
linux-manual-3.16 / ProcessEventNotification(9): Route eventnotificationreply to all event handlers
linux-manual-3.16 / RIO_DEVICE(9): Macro used to describe a specific rio device
linux-manual-3.16 / RIO_LOP_READ(9): Generate rio_local_read_config_* functions
linux-manual-3.16 / RIO_LOP_WRITE(9): Generate rio_local_write_config_* functions
linux-manual-3.16 / RIO_OP_READ(9): Generate rio_mport_read_config_* functions
linux-manual-3.16 / RIO_OP_WRITE(9): Generate rio_mport_write_config_* functions
linux-manual-3.16 / SCPNT_TO_LOOKUP_IDX(9): Searches for a given scmd in the scsilookup[] array list
linux-manual-3.16 / SET_IEEE80211_DEV(9): Set device for 802.11 hardware
linux-manual-3.16 / SET_IEEE80211_PERM_ADDR(9): Set the permanent mac address for 802.11 hardware
linux-manual-3.16 / SendEventAck(9): Send eventack request to mpt adapter.
linux-manual-3.16 / SendEventNotification(9): Send eventnotification (on or off) request to adapter
linux-manual-3.16 / SendIocInit(9): Send iocinit request to mpt adapter.
linux-manual-3.16 / SendIocReset(9): Send iocreset request to mpt adapter.
linux-manual-3.16 / SendPortEnable(9): Send portenable request to mpt adapter port.
linux-manual-3.16 / USB_DEVICE(9): Macro used to describe a specific usb device
linux-manual-3.16 / USB_DEVICE_AND_INTERFACE_INFO(9): Describe a specific usb device with a class of usb interfaces
linux-manual-3.16 / USB_DEVICE_INFO(9): Macro used to describe a class of usb devices
linux-manual-3.16 / USB_DEVICE_INTERFACE_CLASS(9): Describe a usb device with a specific interface class
linux-manual-3.16 / USB_DEVICE_INTERFACE_NUMBER(9): Describe a usb device with a specific interface number
linux-manual-3.16 / USB_DEVICE_INTERFACE_PROTOCOL(9): Describe a usb device with a specific interface protocol
linux-manual-3.16 / USB_DEVICE_VER(9): Describe a specific usb device with a version range
linux-manual-3.16 / USB_INTERFACE_INFO(9): Macro used to describe a class of usb interfaces
linux-manual-3.16 / USB_VENDOR_AND_INTERFACE_INFO(9): Describe a specific usb vendor with a class of usb interfaces
linux-manual-3.16 / WaitForDoorbellAck(9): Wait for ioc doorbell handshake acknowledge
linux-manual-3.16 / WaitForDoorbellInt(9): Wait for ioc to set its doorbell interrupt bit
linux-manual-3.16 / WaitForDoorbellReply(9): Wait for and capture an ioc handshake reply.
linux-manual-3.16 / __alloc_skb(9): Allocate a network buffer
linux-manual-3.16 / __ata_change_queue_depth(9): Helper for ata_scsi_change_queue_depth
linux-manual-3.16 / __atomic_add_unless(9): Add unless the number is already a given value
linux-manual-3.16 / __audit_fd_pair(9): Record audit data for pipe and socketpair
linux-manual-3.16 / __audit_free(9): Free a per-task audit context
linux-manual-3.16 / __audit_getname(9): Add a name to the list
linux-manual-3.16 / __audit_inode(9): Store the inode and device from a lookup
linux-manual-3.16 / __audit_ipc_obj(9): Record audit data for ipc object
linux-manual-3.16 / __audit_ipc_set_perm(9): Record audit data for new ipc permissions
linux-manual-3.16 / __audit_log_bprm_fcaps(9): Store information about a loading bprm and relevant fcaps
linux-manual-3.16 / __audit_log_capset(9): Store information about the arguments to the capset syscall
linux-manual-3.16 / __audit_mq_getsetattr(9): Record audit data for a posix mq get/set attribute
linux-manual-3.16 / __audit_mq_notify(9): Record audit data for a posix mq notify
linux-manual-3.16 / __audit_mq_open(9): Record audit data for a posix mq open
linux-manual-3.16 / __audit_mq_sendrecv(9): Record audit data for a posix mq timed send/receive
linux-manual-3.16 / __audit_reusename(9): Fill out filename with info from existing entry
linux-manual-3.16 / __audit_signal_info(9): Record signal info for shutting down audit subsystem
linux-manual-3.16 / __audit_sockaddr(9): Record audit data for sys_bind, sys_connect, sys_sendto
linux-manual-3.16 / __audit_socketcall(9): Record audit data for sys_socketcall
linux-manual-3.16 / __audit_syscall_entry(9): Fill in an audit record at syscall entry
linux-manual-3.16 / __audit_syscall_exit(9): Deallocate audit context after a system call
linux-manual-3.16 / __bio_clone_fast(9): Clone a bio that shares the original bios biovec
linux-manual-3.16 / __bitmap_parse(9): Convert an ascii hex string into a bitmap.
linux-manual-3.16 / __bitmap_parselist(9): Convert list format ascii string to bitmap
linux-manual-3.16 / __bitmap_shift_left(9): Logical left shift of the bits in a bitmap
linux-manual-3.16 / __bitmap_shift_right(9): Logical right shift of the bits in a bitmap
linux-manual-3.16 / __blk_drain_queue(9): Drain requests from request_queue
linux-manual-3.16 / __blk_end_bidi_request(9): Complete a bidi request with queue lock held
linux-manual-3.16 / __blk_end_request(9): Helper function for drivers to complete the request.
linux-manual-3.16 / __blk_end_request_all(9): Helper function for drives to finish the request.
linux-manual-3.16 / __blk_end_request_cur(9): Helper function to finish the current request chunk.
linux-manual-3.16 / __blk_end_request_err(9): Finish a request till the next failure boundary.
linux-manual-3.16 / __blk_queue_free_tags(9): Release tag maintenance info
linux-manual-3.16 / __blk_run_queue(9): Run a single device queue
linux-manual-3.16 / __blk_run_queue_uncond(9): Run a queue whether or not it has been stopped
linux-manual-3.16 / __bread(9): Reads a specified block and returns the bh
linux-manual-3.16 / __bread_gfp(9): Reads a specified block and returns the bh
linux-manual-3.16 / __break_lease(9): Revoke all outstanding leases on file
linux-manual-3.16 / __change_bit(9): Toggle a bit in memory
linux-manual-3.16 / __check_region(9): Check if a resource region is busy or free
linux-manual-3.16 / __class_create(9): Create a struct class structure
linux-manual-3.16 / __clear_user(9): Zero a block of memory in user space, with less checking.
linux-manual-3.16 / __copy_from_user(9): Copy a block of data from user space, with less checking.
linux-manual-3.16 / __copy_to_user(9): Copy a block of data into user space, with less checking.
linux-manual-3.16 / __copy_to_user_inatomic(9): Copy a block of data into user space, with less checking.
linux-manual-3.16 / __d_drop(9): Drop a dentry
linux-manual-3.16 / __dev_get_by_index(9): Find a device by its ifindex
linux-manual-3.16 / __dev_get_by_name(9): Find a device by its name
linux-manual-3.16 / __dev_mc_sync(9): Synchonize devices multicast list
linux-manual-3.16 / __dev_mc_unsync(9): Remove synchonized addresses from device
linux-manual-3.16 / __dev_remove_pack(9): Remove packet handler
linux-manual-3.16 / __dev_uc_sync(9): Synchonize devices unicast list
linux-manual-3.16 / __dev_uc_unsync(9): Remove synchonized addresses from device
linux-manual-3.16 / __ffs(9): Find first set bit in word
linux-manual-3.16 / __flush_tlb_slot(9): Flushes tlb slot slot.
linux-manual-3.16 / __generic_file_write_iter(9): Write data to a file
linux-manual-3.16 / __get_request(9): Get a free request
linux-manual-3.16 / __ht_create_irq(9): Create an irq and attach it to a device.
linux-manual-3.16 / __i2c_transfer(9): Unlocked flavor of i2c_transfer
linux-manual-3.16 / __insert_inode_hash(9): Hash an inode
linux-manual-3.16 / __kfree_skb(9): Private function
linux-manual-3.16 / __krealloc(9): Like krealloc but dont free p.
linux-manual-3.16 / __list_del_entry(9): Deletes entry from list.
linux-manual-3.16 / __lock_page(9): Get a lock on the page, assuming we need to sleep to get it
linux-manual-3.16 / __mark_inode_dirty(9): Internal function
linux-manual-3.16 / __nand_calculate_ecc(9): [nand interface] calculate 3-byte ecc for 256/512-byte block
linux-manual-3.16 / __nand_correct_data(9): [nand interface] detect and correct bit error(s)
linux-manual-3.16 / __nand_unlock(9): [replaceable] unlocks specified locked blocks
linux-manual-3.16 / __napi_schedule(9): Schedule for receive
linux-manual-3.16 / __netdev_alloc_skb(9): Allocate an skbuff for rx on a specific device
linux-manual-3.16 / __netif_subqueue_stopped(9): Test status of subqueue
linux-manual-3.16 / __pci_complete_power_transition(9): Complete power transition of a pci device
linux-manual-3.16 / __pci_enable_wake(9): Enable pci device as wakeup event source
linux-manual-3.16 / __pci_hp_register(9): Register a hotplug_slot with the pci hotplug subsystem
linux-manual-3.16 / __pci_register_driver(9): Register a new pci driver
linux-manual-3.16 / __pci_reset_function(9): Reset a pci device function
linux-manual-3.16 / __pci_reset_function_locked(9): Reset a pci device function while holding the dev mutex lock.
linux-manual-3.16 / __platform_driver_register(9): Register a driver for platform-level devices
linux-manual-3.16 / __pskb_copy_fclone(9): Create copy of an sk_buff with private head.
linux-manual-3.16 / __pskb_pull_tail(9): Advance tail of skb header
linux-manual-3.16 / __register_chrdev(9): Create and register a cdev occupying a range of minors
linux-manual-3.16 / __relay_reset(9): Reset a channel buffer
linux-manual-3.16 / __release_region(9): Release a previously reserved resource region
linux-manual-3.16 / __remove_inode_hash(9): Remove an inode from the hash
linux-manual-3.16 / __request_module(9): Try to load a kernel module
linux-manual-3.16 / __request_region(9): Create a new busy resource region
linux-manual-3.16 / __root_device_register(9): Allocate and register a root device
linux-manual-3.16 / __round_jiffies(9): Function to round jiffies to a full second
linux-manual-3.16 / __round_jiffies_relative(9): Function to round jiffies to a full second
linux-manual-3.16 / __round_jiffies_up(9): Function to round jiffies up to a full second
linux-manual-3.16 / __round_jiffies_up_relative(9): Function to round jiffies up to a full second
linux-manual-3.16 / __scsi_device_lookup(9): Find a device given the host (unlocked)
linux-manual-3.16 / __scsi_device_lookup_by_target(9): Find a device given the target (unlocked)
linux-manual-3.16 / __scsi_get_command(9): Allocate a struct scsi_cmnd
linux-manual-3.16 / __scsi_put_command(9): Free a struct scsi_cmnd
linux-manual-3.16 / __set_bit(9): Set a bit in memory
linux-manual-3.16 / __shost_for_each_device(9): Iterate over all devices of a host (unlocked)
linux-manual-3.16 / __sk_mem_reclaim(9): Reclaim memory_allocated
linux-manual-3.16 / __sk_mem_schedule(9): Increase sk_forward_alloc and memory_allocated
linux-manual-3.16 / __skb_alloc_page(9): Allocate a page for ps-rx for a given skb and preserve pfmemalloc data
linux-manual-3.16 / __skb_alloc_pages(9): Allocate pages for ps-rx on a skb and preserve pfmemalloc data
linux-manual-3.16 / __skb_fill_page_desc(9): Initialise a paged fragment in an skb
linux-manual-3.16 / __skb_frag_ref(9): Take an addition reference on a paged fragment.
linux-manual-3.16 / __skb_frag_set_page(9): Sets the page contained in a paged fragment
linux-manual-3.16 / __skb_frag_unref(9): Release a reference on a paged fragment.
linux-manual-3.16 / __skb_gso_segment(9): Perform segmentation on skb.
linux-manual-3.16 / __skb_queue_after(9): Queue a buffer at the list head
linux-manual-3.16 / __skb_queue_head_init(9): Initialize non-spinlock portions of sk_buff_head
linux-manual-3.16 / __skb_recv_datagram(9): Receive a datagram skbuff
linux-manual-3.16 / __snd_rawmidi_transmit_ack(9): Acknowledge the transmission
linux-manual-3.16 / __snd_rawmidi_transmit_peek(9): Copy data from the internal buffer
linux-manual-3.16 / __splice_from_pipe(9): Splice data from a pipe to given actor
linux-manual-3.16 / __starget_for_each_device(9): Helper to walk all devices of a target (unlocked)
linux-manual-3.16 / __test_and_clear_bit(9): Clear a bit and return its old value
linux-manual-3.16 / __test_and_set_bit(9): Set a bit and return its old value
linux-manual-3.16 / __uio_register_device(9): Register a new userspace io device
linux-manual-3.16 / __unqueue_futex(9): Remove the futex_q from its futex_hash_bucket
linux-manual-3.16 / __unregister_chrdev(9): Unregister and destroy a cdev
linux-manual-3.16 / __wake_up(9): Wake up threads blocked on a waitqueue.
linux-manual-3.16 / __wake_up_sync_key(9): Wake up threads blocked on a waitqueue.
linux-manual-3.16 / _copy_from_pages(9): _copy_from_pages -
linux-manual-3.16 / _copy_from_user(9): Copy a block of data from user space.
linux-manual-3.16 / _copy_to_user(9): Copy a block of data into user space.
linux-manual-3.16 / abort_exclusive_wait(9): Abort exclusive waiting in a queue
linux-manual-3.16 / absent_pages_in_range(9): Return number of page frames in holes within a range
linux-manual-3.16 / acct_auto_close(9): Turn off a filesystems accounting if it is on
linux-manual-3.16 / acct_auto_close_mnt(9): Turn off a filesystems accounting if it is on
linux-manual-3.16 / acct_collect(9): Collect accounting information into pacct_struct
linux-manual-3.16 / acct_process(9): Now just a wrapper around acct_process_in_ns, which in turn is a wrapper around do_acct_process.
linux-manual-3.16 / acpi_bus_register_driver(9): Register a driver with the acpi bus
linux-manual-3.16 / acpi_bus_scan(9): Add acpi device node objects in a given namespace scope.
linux-manual-3.16 / acpi_bus_trim(9): Detach scan handlers and drivers from acpi device objects.
linux-manual-3.16 / acpi_bus_unregister_driver(9): Unregisters a driver with the acpi bus
linux-manual-3.16 / acpi_match_device(9): Match a struct device against a given list of acpi ids
linux-manual-3.16 / acpi_scan_drop_device(9): Drop an acpi device object.
linux-manual-3.16 / add_disk(9): Add partitioning information to kernel list
linux-manual-3.16 / add_marker_len(9): Compute the length of the marker in data area
linux-manual-3.16 / add_page_wait_queue(9): Add an arbitrary waiter to a pages wait queue
linux-manual-3.16 / add_taint(9): Add_taint -
linux-manual-3.16 / add_timer(9): Start a timer
linux-manual-3.16 / add_timer_on(9): Start a timer on a particular cpu
linux-manual-3.16 / add_to_page_cache_locked(9): Add a locked page to the pagecache
linux-manual-3.16 / adjust_resource(9): Modify a resources start and size
linux-manual-3.16 / aica_rtc_gettimeofday(9): Get the time from the aica rtc
linux-manual-3.16 / aica_rtc_settimeofday(9): Set the aica rtc to the current time
linux-manual-3.16 / airq_iv_alloc(9): Allocate irq bits from an interrupt vector
linux-manual-3.16 / airq_iv_create(9): Create an interrupt vector
linux-manual-3.16 / airq_iv_free(9): Free irq bits of an interrupt vector
linux-manual-3.16 / airq_iv_release(9): Release an interrupt vector
linux-manual-3.16 / airq_iv_scan(9): Scan interrupt vector for non-zero bits
linux-manual-3.16 / alloc_chrdev_region(9): Register a range of char device numbers
linux-manual-3.16 / alloc_contig_range(9): - tries to allocate given range of pages
linux-manual-3.16 / alloc_etherdev_mqs(9): Allocates and sets up an ethernet device
linux-manual-3.16 / alloc_netdev_mqs(9): Allocate network device
linux-manual-3.16 / alloc_vm_area(9): Allocate a range of kernel address space
linux-manual-3.16 / allocate_resource(9): Allocate empty slot in the resource tree given range & alignment. the resource will be reallocated with a new size if it was already allocated
linux-manual-3.16 / anon_transport_class_register(9): Register an anonymous class
linux-manual-3.16 / anon_transport_class_unregister(9): Unregister an anon class
linux-manual-3.16 / arch_phys_wc_add(9): Add a wc mtrr and handle errors if pat is unavailable
linux-manual-3.16 / ata_build_rw_tf(9): Build ata taskfile for given read/write request
linux-manual-3.16 / ata_bus_probe(9): Reset and probe ata bus
linux-manual-3.16 / ata_cable_40wire(9): Return 40 wire cable type
linux-manual-3.16 / ata_cable_80wire(9): Return 80 wire cable type
linux-manual-3.16 / ata_cable_ignore(9): Return ignored pata cable.
linux-manual-3.16 / ata_cable_sata(9): Return sata cable type
linux-manual-3.16 / ata_cable_unknown(9): Return unknown pata cable.
linux-manual-3.16 / ata_cmd_ioctl(9): Handler for hdio_drive_cmd ioctl
linux-manual-3.16 / ata_dev_classify(9): Determine device type based on ata-spec signature
linux-manual-3.16 / ata_dev_configure(9): Configure the specified ata/atapi device
linux-manual-3.16 / ata_dev_init(9): Initialize an ata_device structure
linux-manual-3.16 / ata_dev_init_params(9): Issue init dev params command
linux-manual-3.16 / ata_dev_next(9): Device iteration helper
linux-manual-3.16 / ata_dev_pair(9): Return other device on cable
linux-manual-3.16 / ata_dev_phys_link(9): Find physical link for a device
linux-manual-3.16 / ata_dev_read_id(9): Read id data from the specified device
linux-manual-3.16 / ata_dev_reread_id(9): Re-read identify data
linux-manual-3.16 / ata_dev_revalidate(9): Revalidate ata device
linux-manual-3.16 / ata_dev_same_device(9): Determine whether new id matches configured device
linux-manual-3.16 / ata_dev_set_feature(9): Issue set features - sata features
linux-manual-3.16 / ata_dev_set_xfermode(9): Issue set features - xfer mode command
linux-manual-3.16 / ata_dev_xfermask(9): Compute supported xfermask of the given device
linux-manual-3.16 / ata_do_dev_read_id(9): Default id read method
linux-manual-3.16 / ata_do_set_mode(9): Program timings and issue set features - xfer
linux-manual-3.16 / ata_do_simple_cmd(9): Execute simple internal command
linux-manual-3.16 / ata_down_xfermask_limit(9): Adjust dev xfer masks downward
linux-manual-3.16 / ata_dump_id(9): Identify device info debugging output
linux-manual-3.16 / ata_dump_status(9): User friendly display of error info
linux-manual-3.16 / ata_exec_internal(9): Execute libata internal command
linux-manual-3.16 / ata_exec_internal_sg(9): Execute libata internal command
linux-manual-3.16 / ata_finalize_port_ops(9): Finalize ata_port_operations
linux-manual-3.16 / ata_force_cbl(9): Force cable type according to libata.force
linux-manual-3.16 / ata_force_horkage(9): Force horkage according to libata.force
linux-manual-3.16 / ata_force_link_limits(9): Force link limits according to libata.force
linux-manual-3.16 / ata_force_xfermask(9): Force xfermask according to libata.force
linux-manual-3.16 / ata_gen_ata_sense(9): Generate a scsi fixed sense block
linux-manual-3.16 / ata_get_identity(9): Handler for hdio_get_identity ioctl
linux-manual-3.16 / ata_get_xlat_func(9): Check if scsi to ata translation is possible
linux-manual-3.16 / ata_host_activate(9): Start host, request irq and register it
linux-manual-3.16 / ata_host_alloc(9): Allocate and init basic ata host resources
linux-manual-3.16 / ata_host_alloc_pinfo(9): Alloc host and init with port_info array
linux-manual-3.16 / ata_host_detach(9): Detach all ports of an ata host
linux-manual-3.16 / ata_host_init(9): Initialize a host struct for sas (ipr, libsas)
linux-manual-3.16 / ata_host_register(9): Register initialized ata host
linux-manual-3.16 / ata_host_resume(9): Resume host
linux-manual-3.16 / ata_host_start(9): Start and freeze ports of an ata host
linux-manual-3.16 / ata_host_suspend(9): Suspend host
linux-manual-3.16 / ata_hpa_resize(9): Resize a device with an hpa set
linux-manual-3.16 / ata_id_c_string(9): Convert identify device page into c string
linux-manual-3.16 / ata_id_string(9): Convert identify device page into string
linux-manual-3.16 / ata_id_xfermask(9): Compute xfermask from the given identify data
linux-manual-3.16 / ata_is_40wire(9): Check drive side detection
linux-manual-3.16 / ata_link_init(9): Initialize an ata_link structure
linux-manual-3.16 / ata_link_next(9): Link iteration helper
linux-manual-3.16 / ata_link_offline(9): Test whether the given link is offline
linux-manual-3.16 / ata_link_online(9): Test whether the given link is online
linux-manual-3.16 / ata_mode_string(9): Convert xfer_mask to string
linux-manual-3.16 / ata_mselect_caching(9): Simulate mode select for caching info page
linux-manual-3.16 / ata_msense_caching(9): Simulate mode sense caching info page
linux-manual-3.16 / ata_msense_ctl_mode(9): Simulate mode sense control mode page
linux-manual-3.16 / ata_msense_rw_recovery(9): Simulate mode sense r/w error recovery page
linux-manual-3.16 / ata_msleep(9): Ata eh owner aware msleep
linux-manual-3.16 / ata_pack_xfermask(9): Pack pio, mwdma and udma masks into xfer_mask
linux-manual-3.16 / ata_pci_remove_one(9): Pci layer callback for device removal
linux-manual-3.16 / ata_phys_link_offline(9): Test whether the given link is offline
linux-manual-3.16 / ata_phys_link_online(9): Test whether the given link is online
linux-manual-3.16 / ata_pio_mask_no_iordy(9): Return the non iordy mask
linux-manual-3.16 / ata_pio_need_iordy(9): Check if iordy needed
linux-manual-3.16 / ata_platform_remove_one(9): Platform layer callback for device removal
linux-manual-3.16 / ata_port_alloc(9): Allocate and initialize basic ata port resources
linux-manual-3.16 / ata_port_detach(9): Detach ata port in prepration of device removal
linux-manual-3.16 / ata_qc_complete(9): Complete an active ata command
linux-manual-3.16 / ata_qc_complete_multiple(9): Complete multiple qcs successfully
linux-manual-3.16 / ata_qc_free(9): Free unused ata_queued_cmd
linux-manual-3.16 / ata_qc_issue(9): Issue taskfile to device
linux-manual-3.16 / ata_qc_new(9): Request an available ata command, for queueing
linux-manual-3.16 / ata_qc_new_init(9): Request an available ata command, and initialize it
linux-manual-3.16 / ata_read_native_max_address(9): Read native max address
linux-manual-3.16 / ata_rwcmd_protocol(9): Set taskfile r/w commands and protocol
linux-manual-3.16 / ata_sas_async_probe(9): Simply schedule probing and return
linux-manual-3.16 / ata_sas_port_alloc(9): Allocate port for a sas attached sata device
linux-manual-3.16 / ata_sas_port_destroy(9): Destroy a sata port allocated by ata_sas_port_alloc
linux-manual-3.16 / ata_sas_port_init(9): Initialize a sata device
linux-manual-3.16 / ata_sas_port_start(9): Set port up for dma.
linux-manual-3.16 / ata_sas_port_stop(9): Undo ata_sas_port_start
linux-manual-3.16 / ata_sas_queuecmd(9): Issue scsi cdb to libata-managed device
linux-manual-3.16 / ata_sas_slave_configure(9): Default slave_config routine for libata devices
linux-manual-3.16 / ata_scsi_change_queue_depth(9): Scsi callback for queue depth config
linux-manual-3.16 / ata_scsi_dev_rescan(9): Initiate scsi_rescan_device
linux-manual-3.16 / ata_scsi_dump_cdb(9): Dump scsi command contents to dmesg
linux-manual-3.16 / ata_scsi_find_dev(9): Lookup ata_device from scsi_cmnd
linux-manual-3.16 / ata_scsi_flush_xlat(9): Translate scsi synchronize cache command
linux-manual-3.16 / ata_scsi_hotplug(9): Scsi part of hotplug
linux-manual-3.16 / ata_scsi_media_change_notify(9): Send media change event
linux-manual-3.16 / ata_scsi_mode_select_xlat(9): Simulate mode select 6, 10 commands
linux-manual-3.16 / ata_scsi_offline_dev(9): Offline attached scsi device
linux-manual-3.16 / ata_scsi_pass_thru(9): Convert ata pass-thru cdb to taskfile
linux-manual-3.16 / ata_scsi_qc_new(9): Acquire new ata_queued_cmd reference
linux-manual-3.16 / ata_scsi_queuecmd(9): Issue scsi cdb to libata-managed device
linux-manual-3.16 / ata_scsi_rbuf_fill(9): Wrapper for scsi command simulators
linux-manual-3.16 / ata_scsi_rbuf_get(9): Map response buffer.
linux-manual-3.16 / ata_scsi_rbuf_put(9): Unmap response buffer.
linux-manual-3.16 / ata_scsi_remove_dev(9): Remove attached scsi device
linux-manual-3.16 / ata_scsi_rw_xlat(9): Translate scsi r/w command into an ata one
linux-manual-3.16 / ata_scsi_simulate(9): Simulate scsi command on ata device
linux-manual-3.16 / ata_scsi_slave_config(9): Set scsi device attributes
linux-manual-3.16 / ata_scsi_slave_destroy(9): Scsi device is about to be destroyed
linux-manual-3.16 / ata_scsi_start_stop_xlat(9): Translate scsi start stop unit command
linux-manual-3.16 / ata_scsi_translate(9): Translate then issue scsi command to ata device
linux-manual-3.16 / ata_scsi_unlock_native_capacity(9): Unlock native capacity
linux-manual-3.16 / ata_scsi_user_scan(9): Indication for user-initiated bus scan
linux-manual-3.16 / ata_scsi_verify_xlat(9): Translate scsi verify command into an ata one
linux-manual-3.16 / ata_scsiop_inq_00(9): Simulate inquiry vpd page 0, list of pages
linux-manual-3.16 / ata_scsiop_inq_80(9): Simulate inquiry vpd page 80, device serial number
linux-manual-3.16 / ata_scsiop_inq_83(9): Simulate inquiry vpd page 83, device identity
linux-manual-3.16 / ata_scsiop_inq_89(9): Simulate inquiry vpd page 89, ata info
linux-manual-3.16 / ata_scsiop_inq_std(9): Simulate inquiry command
linux-manual-3.16 / ata_scsiop_mode_sense(9): Simulate mode sense 6, 10 commands
linux-manual-3.16 / ata_scsiop_noop(9): Command handler that simply returns success.
linux-manual-3.16 / ata_scsiop_read_cap(9): Simulate read capacity[ 16] commands
linux-manual-3.16 / ata_scsiop_report_luns(9): Simulate report luns command
linux-manual-3.16 / ata_set_max_sectors(9): Set max sectors
linux-manual-3.16 / ata_sg_clean(9): Unmap dma memory associated with command
linux-manual-3.16 / ata_sg_init(9): Associate command with scatter-gather table.
linux-manual-3.16 / ata_sg_setup(9): Dma-map the scatter-gather table associated with a command.
linux-manual-3.16 / ata_slave_link_init(9): Initialize slave link
linux-manual-3.16 / ata_std_bios_param(9): Generic bios head/sector/cylinder calculator used by sd.
linux-manual-3.16 / ata_std_postreset(9): Standard postreset callback
linux-manual-3.16 / ata_std_prereset(9): Prepare for reset
linux-manual-3.16 / ata_std_qc_defer(9): Check whether a qc needs to be deferred
linux-manual-3.16 / ata_task_ioctl(9): Handler for hdio_drive_task ioctl
linux-manual-3.16 / ata_tf_from_fis(9): Convert sata fis to ata taskfile
linux-manual-3.16 / ata_tf_read_block(9): Read block address from ata taskfile
linux-manual-3.16 / ata_tf_to_fis(9): Convert ata taskfile to sata fis structure
linux-manual-3.16 / ata_timing_cycle2mode(9): Find xfer mode for the specified cycle duration
linux-manual-3.16 / ata_to_sense_error(9): Convert ata error to scsi error
linux-manual-3.16 / ata_unpack_xfermask(9): Unpack xfer_mask into pio, mwdma and udma masks
linux-manual-3.16 / ata_wait_after_reset(9): Wait for link to become ready after reset
linux-manual-3.16 / ata_wait_ready(9): Wait for link to become ready
linux-manual-3.16 / ata_wait_register(9): Wait until register value changes
linux-manual-3.16 / ata_xfer_mask2mode(9): Find matching xfer_* for the given xfer_mask
linux-manual-3.16 / ata_xfer_mode2mask(9): Find matching xfer_mask for xfer_*
linux-manual-3.16 / ata_xfer_mode2shift(9): Find matching xfer_shift for xfer_*
linux-manual-3.16 / atapi_check_dma(9): Check whether atapi dma can be supported
linux-manual-3.16 / atapi_cmd_type(9): Determine atapi command type from scsi opcode
linux-manual-3.16 / atapi_drain_needed(9): Check whether data transfer may overflow
linux-manual-3.16 / atapi_xlat(9): Initialize packet taskfile
linux-manual-3.16 / atomic_add(9): Add integer to atomic variable
linux-manual-3.16 / atomic_add_negative(9): Add and test if negative
linux-manual-3.16 / atomic_add_return(9): Add integer and return
linux-manual-3.16 / atomic_dec(9): Decrement atomic variable
linux-manual-3.16 / atomic_dec_and_mutex_lock(9): Return holding mutex if we dec to 0
linux-manual-3.16 / atomic_dec_and_test(9): Decrement and test
linux-manual-3.16 / atomic_inc(9): Increment atomic variable
linux-manual-3.16 / atomic_inc_and_test(9): Increment and test
linux-manual-3.16 / atomic_inc_short(9): Increment of a short integer
linux-manual-3.16 / atomic_or_long(9): Or of two long integers
linux-manual-3.16 / atomic_read(9): Read atomic variable
linux-manual-3.16 / atomic_set(9): Set atomic variable
linux-manual-3.16 / atomic_sub(9): Subtract integer from atomic variable
linux-manual-3.16 / atomic_sub_and_test(9): Subtract value from variable and test result
linux-manual-3.16 / atomic_sub_return(9): Subtract integer and return
linux-manual-3.16 / audit_alloc(9): Allocate an audit context block for a task
linux-manual-3.16 / audit_compare_dname_path(9): Compare given dentry name with last component in given path. return of 0 indicates a match.
linux-manual-3.16 / audit_core_dumps(9): Record information about processes that end abnormally
linux-manual-3.16 / audit_list_rules_send(9): List the audit rules
linux-manual-3.16 / audit_log(9): Log an audit record
linux-manual-3.16 / audit_log_end(9): End one audit record
linux-manual-3.16 / audit_log_format(9): Format a message into the audit buffer.
linux-manual-3.16 / audit_log_secctx(9): Converts and logs selinux context
linux-manual-3.16 / audit_log_start(9): Obtain an audit buffer
linux-manual-3.16 / audit_rule_change(9): Apply all rules to the specified message type
linux-manual-3.16 / audit_set_loginuid(9): Set current tasks audit_context loginuid
linux-manual-3.16 / auditsc_get_stamp(9): Get local copies of audit_context values
linux-manual-3.16 / balance_dirty_pages_ratelimited(9): Balance dirty memory state
ax25-tools / baycom(9): Amateur (ax.25) packet radio network driver for baycom modems
linux-manual-3.16 / bd_link_disk_holder(9): Create symlinks between holding disk and slave bdev
linux-manual-3.16 / bd_unlink_disk_holder(9): Destroy symlinks created by bd_link_disk_holder
linux-manual-3.16 / bdev_read_page(9): Start reading a page from a block device
linux-manual-3.16 / bdev_stack_limits(9): Adjust queue limits for stacked drivers
linux-manual-3.16 / bdev_write_page(9): Start writing a page to a block device
linux-manual-3.16 / bdget_disk(9): Do bdget by gendisk and partition number
linux-manual-3.16 / bdgrab(9): - grab a reference to an already referenced block device
linux-manual-3.16 / bh_submit_read(9): Submit a locked buffer for reading
linux-manual-3.16 / bh_uptodate_or_lock(9): Test whether the buffer is uptodate
linux-manual-3.16 / bio_add_page(9): Attempt to add page to bio
linux-manual-3.16 / bio_add_pc_page(9): Attempt to add page to bio
linux-manual-3.16 / bio_advance(9): Increment/complete a bio by some number of bytes
linux-manual-3.16 / bio_alloc_bioset(9): Allocate a bio for i/o
linux-manual-3.16 / bio_alloc_pages(9): Allocates a single page for each bvec in a bio
linux-manual-3.16 / bio_chain(9): Chain bio completions
linux-manual-3.16 / bio_clone_bioset(9): Clone a bio
linux-manual-3.16 / bio_clone_fast(9): Clone a bio that shares the original bios biovec
linux-manual-3.16 / bio_copy_data(9): Copy contents of data buffers from one chain of bios to another
linux-manual-3.16 / bio_copy_kern(9): Copy kernel address into bio
linux-manual-3.16 / bio_copy_user(9): Copy user data to bio
linux-manual-3.16 / bio_endio(9): End i/o on a bio
linux-manual-3.16 / bio_endio_nodec(9): End i/o on a bio, without decrementing bi_remaining
linux-manual-3.16 / bio_get_nr_vecs(9): Return approx number of vecs
linux-manual-3.16 / bio_map_kern(9): Map kernel address into bio
linux-manual-3.16 / bio_map_user(9): Map user address into bio
linux-manual-3.16 / bio_put(9): Release a reference to a bio
linux-manual-3.16 / bio_reset(9): Reinitialize a bio
linux-manual-3.16 / bio_split(9): Split a bio
linux-manual-3.16 / bio_trim(9): Trim a bio
linux-manual-3.16 / bio_uncopy_user(9): Finish previously mapped bio
linux-manual-3.16 / bio_unmap_user(9): Unmap a bio
linux-manual-3.16 / bioset_create(9): Create a bio_set
linux-manual-3.16 / bitmap_allocate_region(9): Allocate bitmap region
linux-manual-3.16 / bitmap_bitremap(9): Apply map defined by a pair of bitmaps to a single bit
linux-manual-3.16 / bitmap_copy_le(9): Copy a bitmap, putting the bits into little-endian order.
linux-manual-3.16 / bitmap_find_free_region(9): Find a contiguous aligned mem region
linux-manual-3.16 / bitmap_fold(9): Fold larger bitmap into smaller, modulo specified size
linux-manual-3.16 / bitmap_onto(9): Translate one bitmap relative to another
linux-manual-3.16 / bitmap_ord_to_pos(9): Find position of n-th set bit in bitmap
linux-manual-3.16 / bitmap_parse_user(9): Convert an ascii hex string in a user buffer into a bitmap
linux-manual-3.16 / bitmap_parselist_user(9): Bitmap_parselist_user -
linux-manual-3.16 / bitmap_pos_to_ord(9): Find ordinal of set bit at given position in bitmap
linux-manual-3.16 / bitmap_release_region(9): Release allocated bitmap region
linux-manual-3.16 / bitmap_remap(9): Apply map defined by a pair of bitmaps to another bitmap
linux-manual-3.16 / bitmap_scnlistprintf(9): Convert bitmap to list format ascii string
linux-manual-3.16 / bitmap_scnprintf(9): Convert bitmap to an ascii hex string.
linux-manual-3.16 / blk_add_request_payload(9): Add a payload to a request
linux-manual-3.16 / blk_add_trace_bio(9): Add a trace for a bio oriented action
linux-manual-3.16 / blk_add_trace_bio_remap(9): Add a trace for a bio-remap operation
linux-manual-3.16 / blk_add_trace_rq(9): Add a trace for a request oriented action
linux-manual-3.16 / blk_add_trace_rq_remap(9): Add a trace for a request-remap operation
linux-manual-3.16 / blk_alloc_devt(9): Allocate a dev_t for a partition
linux-manual-3.16 / blk_attempt_plug_merge(9): Try to merge with currents plugged list
linux-manual-3.16 / blk_cleanup_queue(9): Shutdown a request queue
linux-manual-3.16 / blk_cloned_rq_check_limits(9): Helper function to check a cloned request for new the queue limits
linux-manual-3.16 / blk_delay_queue(9): Restart queueing after defined interval
linux-manual-3.16 / blk_end_bidi_request(9): Complete a bidi request
linux-manual-3.16 / blk_end_request(9): Helper function for drivers to complete the request.
linux-manual-3.16 / blk_end_request_all(9): Helper function for drives to finish the request.
linux-manual-3.16 / blk_end_request_cur(9): Helper function to finish the current request chunk.
linux-manual-3.16 / blk_end_request_err(9): Finish a request till the next failure boundary.
linux-manual-3.16 / blk_execute_rq(9): Insert a request into queue for execution
linux-manual-3.16 / blk_execute_rq_nowait(9): Insert a request into queue for execution
linux-manual-3.16 / blk_fetch_request(9): Fetch a request from a request queue
linux-manual-3.16 / blk_free_devt(9): Free a dev_t
linux-manual-3.16 / blk_free_tags(9): Release a given set of tag maintenance info
linux-manual-3.16 / blk_get_backing_dev_info(9): Get the address of a queues backing_dev_info
linux-manual-3.16 / blk_init_queue(9): Prepare a request queue for use with a block device
linux-manual-3.16 / blk_init_tags(9): Initialize the tag info for an external tag map
linux-manual-3.16 / blk_insert_cloned_request(9): Helper for stacking drivers to submit a request
linux-manual-3.16 / blk_integrity_compare(9): Compare integrity profile of two disks
linux-manual-3.16 / blk_integrity_register(9): Register a gendisk as being integrity-capable
linux-manual-3.16 / blk_integrity_unregister(9): Remove block integrity profile
linux-manual-3.16 / blk_limits_io_min(9): Set minimum request size for a device
linux-manual-3.16 / blk_limits_io_opt(9): Set optimal request size for a device
linux-manual-3.16 / blk_limits_max_hw_sectors(9): Set hard and soft limit of max sectors for request
linux-manual-3.16 / blk_lld_busy(9): Check if underlying low-level drivers of a device are busy
linux-manual-3.16 / blk_make_request(9): Given a bio, allocate a corresponding struct request.
linux-manual-3.16 / blk_mangle_minor(9): Scatter minor numbers apart
linux-manual-3.16 / blk_peek_request(9): Peek at the top of a request queue
linux-manual-3.16 / blk_pm_runtime_init(9): Block layer runtime pm initialization routine
linux-manual-3.16 / blk_post_runtime_resume(9): Post runtime resume processing
linux-manual-3.16 / blk_post_runtime_suspend(9): Post runtime suspend processing
linux-manual-3.16 / blk_pre_runtime_resume(9): Pre runtime resume processing
linux-manual-3.16 / blk_pre_runtime_suspend(9): Pre runtime suspend check
linux-manual-3.16 / blk_queue_alignment_offset(9): Set physical block alignment offset
linux-manual-3.16 / blk_queue_bounce_limit(9): Set bounce buffer limit for queue
linux-manual-3.16 / blk_queue_bypass_end(9): Leave queue bypass mode
linux-manual-3.16 / blk_queue_bypass_start(9): Enter queue bypass mode
linux-manual-3.16 / blk_queue_chunk_sectors(9): Set size of the chunk for this queue
linux-manual-3.16 / blk_queue_dma_alignment(9): Set dma length and memory alignment
linux-manual-3.16 / blk_queue_dma_drain(9): Set up a drain buffer for excess dma.
linux-manual-3.16 / blk_queue_dma_pad(9): Set pad mask
linux-manual-3.16 / blk_queue_end_tag(9): End tag operations for a request
linux-manual-3.16 / blk_queue_find_tag(9): Find a request by its tag and queue
linux-manual-3.16 / blk_queue_flush(9): Configure queues cache flush capability
linux-manual-3.16 / blk_queue_free_tags(9): Release tag maintenance info
linux-manual-3.16 / blk_queue_init_tags(9): Initialize the queue tag info
linux-manual-3.16 / blk_queue_invalidate_tags(9): Invalidate all pending tags
linux-manual-3.16 / blk_queue_io_min(9): Set minimum request size for the queue
linux-manual-3.16 / blk_queue_io_opt(9): Set optimal request size for the queue
linux-manual-3.16 / blk_queue_logical_block_size(9): Set logical block size for the queue
linux-manual-3.16 / blk_queue_make_request(9): Define an alternate make_request function for a device
linux-manual-3.16 / blk_queue_max_discard_sectors(9): Set max sectors for a single discard
linux-manual-3.16 / blk_queue_max_hw_sectors(9): Set max sectors for a request for this queue
linux-manual-3.16 / blk_queue_max_segment_size(9): Set max segment size for blk_rq_map_sg
linux-manual-3.16 / blk_queue_max_segments(9): Set max hw segments for a request for this queue
linux-manual-3.16 / blk_queue_max_write_same_sectors(9): Set max sectors for a single write same
linux-manual-3.16 / blk_queue_merge_bvec(9): Set a merge_bvec function for queue
linux-manual-3.16 / blk_queue_physical_block_size(9): Set physical block size for the queue
linux-manual-3.16 / blk_queue_prep_rq(9): Set a prepare_request function for queue
linux-manual-3.16 / blk_queue_resize_tags(9): Change the queueing depth
linux-manual-3.16 / blk_queue_segment_boundary(9): Set boundary rules for segment merging
linux-manual-3.16 / blk_queue_stack_limits(9): Inherit underlying queue limits for stacked drivers
linux-manual-3.16 / blk_queue_start_tag(9): Find a free tag and assign it
linux-manual-3.16 / blk_queue_unprep_rq(9): Set an unprepare_request function for queue
linux-manual-3.16 / blk_queue_update_dma_alignment(9): Update dma length and memory alignment
linux-manual-3.16 / blk_queue_update_dma_pad(9): Update pad mask
linux-manual-3.16 / blk_release_queue(9): Release a struct request_queue when it is no longer needed
linux-manual-3.16 / blk_requeue_request(9): Put a request back on queue
linux-manual-3.16 / blk_rq_count_integrity_sg(9): Count number of integrity scatterlist elements
linux-manual-3.16 / blk_rq_err_bytes(9): Determine number of bytes till the next failure boundary
linux-manual-3.16 / blk_rq_map_integrity_sg(9): Map integrity metadata into a scatterlist
linux-manual-3.16 / blk_rq_map_kern(9): Map kernel data to a request, for req_type_block_pc usage
linux-manual-3.16 / blk_rq_map_user(9): Map user data to a request, for req_type_block_pc usage
linux-manual-3.16 / blk_rq_map_user_iov(9): Map user data to a request, for req_type_block_pc usage
linux-manual-3.16 / blk_rq_prep_clone(9): Helper function to setup clone request
linux-manual-3.16 / blk_rq_set_block_pc(9): Initialize a requeest to type block_pc
linux-manual-3.16 / blk_rq_unmap_user(9): Unmap a request with user data
linux-manual-3.16 / blk_rq_unprep_clone(9): Helper function to free all bios in a cloned request
linux-manual-3.16 / blk_run_queue(9): Run a single device queue
linux-manual-3.16 / blk_run_queue_async(9): Run a single device queue in workqueue context
linux-manual-3.16 / blk_set_default_limits(9): Reset limits to default values
linux-manual-3.16 / blk_set_stacking_limits(9): Set default limits for stacking devices
linux-manual-3.16 / blk_stack_limits(9): Adjust queue_limits for stacked devices
linux-manual-3.16 / blk_start_plug(9): Initialize blk_plug and track it inside the task_struct
linux-manual-3.16 / blk_start_queue(9): Restart a previously stopped queue
linux-manual-3.16 / blk_start_request(9): Start request processing on the driver
linux-manual-3.16 / blk_stop_queue(9): Stop a queue
linux-manual-3.16 / blk_sync_queue(9): Cancel any pending callbacks on a queue
linux-manual-3.16 / blk_trace_ioctl(9): Handle the ioctls associated with tracing
linux-manual-3.16 / blk_trace_shutdown(9): Stop and cleanup trace structures
linux-manual-3.16 / blk_unprep_request(9): Unprepare a request
linux-manual-3.16 / blk_update_request(9): Special helper function for request stacking drivers
linux-manual-3.16 / blkdev_get(9): Open a block device
linux-manual-3.16 / blkdev_get_by_dev(9): Open a block device by device number
linux-manual-3.16 / blkdev_get_by_path(9): Open a block device by name
linux-manual-3.16 / blkdev_issue_discard(9): Queue a discard
linux-manual-3.16 / blkdev_issue_flush(9): Queue a flush
linux-manual-3.16 / blkdev_issue_write_same(9): Queue a write same operation
linux-manual-3.16 / blkdev_issue_zeroout(9): Zero-fill a block range
linux-manual-3.16 / block_invalidatepage(9): Invalidate part or all of a buffer-backed page
linux-manual-3.16 / bmap(9): Find a block number in a file
linux-manual-3.16 / bprintf(9): Parse a format string and place args binary value in a buffer
linux-manual-3.16 / bstr_printf(9): Format a string from binary arguments and place it in a buffer
linux-manual-3.16 / bus_find_device(9): Device iterator for locating a particular device.
linux-manual-3.16 / bus_find_device_by_name(9): Device iterator for locating a particular device of a specific name
linux-manual-3.16 / bus_for_each_dev(9): Device iterator.
linux-manual-3.16 / bus_for_each_drv(9): Driver iterator
linux-manual-3.16 / bus_register(9): Register a driver-core subsystem
linux-manual-3.16 / bus_rescan_devices(9): Rescan devices on the bus for possible drivers
linux-manual-3.16 / bus_unregister(9): Remove a bus from the system
linux-manual-3.16 / cable_is_40wire(9): 40/80/sata decider
linux-manual-3.16 / calculate_imbalance(9): Calculate the amount of imbalance present within the groups of a given sched_domain during load balance.
linux-manual-3.16 / call_netdevice_notifiers(9): Call all network notifier blocks
linux-manual-3.16 / call_usermodehelper(9): Prepare and start a usermode application
linux-manual-3.16 / call_usermodehelper_exec(9): Start a usermode application
linux-manual-3.16 / call_usermodehelper_setup(9): Prepare to call a usermode helper
linux-manual-3.16 / cancel_delayed_work(9): Cancel a delayed work
linux-manual-3.16 / cancel_delayed_work_sync(9): Cancel a delayed work and wait for it to finish
linux-manual-3.16 / cancel_work_sync(9): Cancel a work and wait for it to finish
linux-manual-3.16 / ccw_dev_id_is_equal(9): Compare two ccw_dev_ids
linux-manual-3.16 / ccw_device_clear(9): Terminate i/o request processing
linux-manual-3.16 / ccw_device_clear_options(9): Clear some options
linux-manual-3.16 / ccw_device_get_chp_desc(9): Return newly allocated channel-path descriptor
linux-manual-3.16 / ccw_device_get_ciw(9): Search for ciw command in extended sense data.
linux-manual-3.16 / ccw_device_get_id(9): Obtain a ccw device id
linux-manual-3.16 / ccw_device_get_mdc(9): Accumulate max data count
linux-manual-3.16 / ccw_device_get_path_mask(9): Get currently available paths
linux-manual-3.16 / ccw_device_get_schid(9): Obtain a subchannel id
linux-manual-3.16 / ccw_device_halt(9): Halt i/o request processing
linux-manual-3.16 / ccw_device_is_multipath(9): Determine if device is operating in multipath mode
linux-manual-3.16 / ccw_device_is_pathgroup(9): Determine if paths to this device are grouped
linux-manual-3.16 / ccw_device_resume(9): Resume channel program execution
linux-manual-3.16 / ccw_device_set_offline(9): Disable a ccw device for i/o
linux-manual-3.16 / ccw_device_set_online(9): Enable a ccw device for i/o
linux-manual-3.16 / ccw_device_set_options(9): Set some options
linux-manual-3.16 / ccw_device_set_options_mask(9): Set some options and unset the rest
linux-manual-3.16 / ccw_device_siosl(9): Initiate logging
linux-manual-3.16 / ccw_device_start(9): Start a s390 channel program
linux-manual-3.16 / ccw_device_start_key(9): Start a s390 channel program with key
linux-manual-3.16 / ccw_device_start_timeout(9): Start a s390 channel program with timeout
linux-manual-3.16 / ccw_device_start_timeout_key(9): Start a s390 channel program with timeout and key
linux-manual-3.16 / ccw_device_tm_intrg(9): Perform interrogate function
linux-manual-3.16 / ccw_device_tm_start(9): Perform start function
linux-manual-3.16 / ccw_device_tm_start_key(9): Perform start function
linux-manual-3.16 / ccw_device_tm_start_timeout(9): Perform start function
linux-manual-3.16 / ccw_device_tm_start_timeout_key(9): Perform start function
linux-manual-3.16 / ccw_driver_register(9): Register a ccw driver
linux-manual-3.16 / ccw_driver_unregister(9): Deregister a ccw driver
linux-manual-3.16 / ccwgroup_create_dev(9): Create and register a ccw group device
linux-manual-3.16 / ccwgroup_driver_register(9): Register a ccw group driver
linux-manual-3.16 / ccwgroup_driver_unregister(9): Deregister a ccw group driver
linux-manual-3.16 / ccwgroup_probe_ccwdev(9): Probe function for slave devices
linux-manual-3.16 / ccwgroup_remove_ccwdev(9): Remove function for slave devices
linux-manual-3.16 / ccwgroup_set_offline(9): Disable a ccwgroup device
linux-manual-3.16 / ccwgroup_set_online(9): Enable a ccwgroup device
linux-manual-3.16 / cdev_add(9): Add a char device to the system
linux-manual-3.16 / cdev_alloc(9): Allocate a cdev structure
linux-manual-3.16 / cdev_del(9): Remove a cdev from the system
linux-manual-3.16 / cdev_init(9): Initialize a cdev structure
linux-manual-3.16 / cfg80211_assoc_timeout(9): Notification of timed out association
linux-manual-3.16 / cfg80211_auth_timeout(9): Notification of timed out authentication
linux-manual-3.16 / cfg80211_check_combinations(9): Check interface combinations
linux-manual-3.16 / cfg80211_classify8021d(9): Determine the 802.1p/1d tag for a data frame
linux-manual-3.16 / cfg80211_connect_result(9): Notify cfg80211 of connection result
linux-manual-3.16 / cfg80211_cqm_pktloss_notify(9): Notify userspace about packetloss to peer
linux-manual-3.16 / cfg80211_cqm_rssi_notify(9): Connection quality monitoring rssi event
linux-manual-3.16 / cfg80211_disconnected(9): Notify cfg80211 that connection was dropped
linux-manual-3.16 / cfg80211_find_ie(9): Find information element in data
linux-manual-3.16 / cfg80211_ibss_joined(9): Notify cfg80211 that device joined an ibss
linux-manual-3.16 / cfg80211_inform_bss_width(9): Inform cfg80211 of a new bss
linux-manual-3.16 / cfg80211_inform_bss_width_frame(9): Inform cfg80211 of a received bss frame
linux-manual-3.16 / cfg80211_mgmt_tx_status(9): Notification of tx status for management frame
linux-manual-3.16 / cfg80211_michael_mic_failure(9): Notification of michael mic failure (tkip)
linux-manual-3.16 / cfg80211_new_sta(9): Notify userspace about station
linux-manual-3.16 / cfg80211_ready_on_channel(9): Notification of remain_on_channel start
linux-manual-3.16 / cfg80211_remain_on_channel_expired(9): Remain_on_channel duration expired
linux-manual-3.16 / cfg80211_roamed(9): Notify cfg80211 of roaming
linux-manual-3.16 / cfg80211_rx_assoc_resp(9): Notification of processed association response
linux-manual-3.16 / cfg80211_rx_mgmt(9): Notification of received, unprocessed management frame
linux-manual-3.16 / cfg80211_rx_mlme_mgmt(9): Notification of processed mlme management frame
linux-manual-3.16 / cfg80211_scan_done(9): Notify that scan finished
linux-manual-3.16 / cfg80211_testmode_alloc_event_skb(9): Allocate testmode event
linux-manual-3.16 / cfg80211_testmode_alloc_reply_skb(9): Allocate testmode reply
linux-manual-3.16 / cfg80211_testmode_event(9): Send the event
linux-manual-3.16 / cfg80211_testmode_reply(9): Send the reply skb
linux-manual-3.16 / cfg80211_tx_mlme_mgmt(9): Notification of transmitted deauth/disassoc frame
linux-manual-3.16 / cfg80211_unlink_bss(9): Unlink bss from internal data structures
linux-manual-3.16 / change_bit(9): Toggle a bit in memory
linux-manual-3.16 / check_asym_packing(9): Check to see if the group is packed into the sched doman.
linux-manual-3.16 / check_conflicting_open(9): See if the given dentry points to a file that has an existing open that would conflict with the desired lease.
linux-manual-3.16 / check_create(9): [generic] create and write bbt(s) if necessary
linux-manual-3.16 / check_disk_size_change(9): Checks for disk size change and adjusts bdev size.
linux-manual-3.16 / check_pattern(9): [generic] check if a pattern is in the buffer
linux-manual-3.16 / check_short_pattern(9): [generic] check if a pattern is in the buffer
linux-manual-3.16 / check_submounts_and_drop(9): Prune dcache, check for submounts and drop
linux-manual-3.16 / clamp(9): Return a value clamped to a given range with strict typechecking
linux-manual-3.16 / clamp_t(9): Return a value clamped to a given range using a given type
linux-manual-3.16 / clamp_val(9): Return a value clamped to a given range using vals type
linux-manual-3.16 / class_compat_create_link(9): Create a compatibility class device link to a bus device
linux-manual-3.16 / class_compat_register(9): Register a compatibility class
linux-manual-3.16 / class_compat_remove_link(9): Remove a compatibility class device link to a bus device
linux-manual-3.16 / class_compat_unregister(9): Unregister a compatibility class
linux-manual-3.16 / class_destroy(9): Destroys a struct class structure
linux-manual-3.16 / class_dev_iter_exit(9): Finish iteration
linux-manual-3.16 / class_dev_iter_init(9): Initialize class device iterator
linux-manual-3.16 / class_dev_iter_next(9): Iterate to the next device
linux-manual-3.16 / class_find_device(9): Device iterator for locating a particular device
linux-manual-3.16 / class_for_each_device(9): Device iterator
linux-manual-3.16 / class_id_show(9): Displays class id of i2o device
linux-manual-3.16 / cleanup_srcu_struct(9): Deconstruct a sleep-rcu structure
linux-manual-3.16 / clear_bit(9): Clears a bit in memory
linux-manual-3.16 / clear_nlink(9): Directly zero an inodes link count
linux-manual-3.16 / clear_user(9): Zero a block of memory in user space.
linux-manual-3.16 / clk_add_alias(9): Add a new clock alias
linux-manual-3.16 / clk_disable(9): Inform the system when the clock source is no longer required.
linux-manual-3.16 / clk_enable(9): Inform the system when the clock source should be running.
linux-manual-3.16 / clk_get(9): Lookup and obtain a reference to a clock producer.
linux-manual-3.16 / clk_get_accuracy(9): Obtain the clock accuracy in ppb (parts per billion) for a clock source.
linux-manual-3.16 / clk_get_parent(9): Get the parent clock source for this clock
linux-manual-3.16 / clk_get_rate(9): Obtain the current clock rate (in hz) for a clock source. this is only valid once the clock source has been enabled.
linux-manual-3.16 / clk_get_sys(9): Get a clock based upon the device name
linux-manual-3.16 / clk_notifier_register(9): Change notifier callback
linux-manual-3.16 / clk_notifier_unregister(9): Change notifier callback
linux-manual-3.16 / clk_prepare(9): Prepare a clock source
linux-manual-3.16 / clk_put(9): "free" the clock source
linux-manual-3.16 / clk_round_rate(9): Adjust a rate to the exact rate a clock can provide
linux-manual-3.16 / clk_set_parent(9): Set the parent clock source for this clock
linux-manual-3.16 / clk_set_rate(9): Set the clock rate for a clock source
linux-manual-3.16 / clk_unprepare(9): Undo preparation of a clock source
linux-manual-3.16 / cmf_read(9): Read one value from the current channel measurement block
linux-manual-3.16 / cmf_readall(9): Read the current channel measurement block
linux-manual-3.16 / compare_ether_header(9): Compare two ethernet headers
linux-manual-3.16 / cond_synchronize_rcu(9): Conditionally wait for an rcu grace period
linux-manual-3.16 / config_ep_by_speed(9): Configures the given endpoint according to gadget speed.
linux-manual-3.16 / console_conditional_schedule(9): Yield the cpu if required
linux-manual-3.16 / console_lock(9): Lock the console system for exclusive use.
linux-manual-3.16 / console_trylock(9): Try to lock the console system for exclusive use.
linux-manual-3.16 / console_unlock(9): Unlock the console system
linux-manual-3.16 / consume_skb(9): Free an skbuff
linux-manual-3.16 / container_of(9): Cast a member of a structure out to the containing structure
linux-manual-3.16 / copy_from_user_toio(9): Copy data from user-space to mmio-space
linux-manual-3.16 / copy_to_user_fromio(9): Copy data from mmio-space to user-space
linux-manual-3.16 / cpupri_cleanup(9): Clean up the cpupri structure
linux-manual-3.16 / cpupri_find(9): Find the best (lowest-pri) cpu in the system
linux-manual-3.16 / cpupri_init(9): Initialize the cpupri structure
linux-manual-3.16 / cpupri_set(9): Update the cpu priority setting
linux-manual-3.16 / crc16(9): Compute the crc-16 for the data buffer
linux-manual-3.16 / crc7_be(9): Update the crc7 for the data buffer
linux-manual-3.16 / crc_ccitt(9): Recompute the crc for the data buffer
linux-manual-3.16 / crc_itu_t(9): Compute the crc-itu-t for the data buffer
linux-manual-3.16 / create_bbt(9): [generic] create a bad block table by scanning the device
linux-manual-3.16 / csum_partial_copy_to_xdr(9): Checksum and copy data
linux-manual-3.16 / d_add(9): Add dentry to hash queues
linux-manual-3.16 / d_add_ci(9): Lookup or allocate new dentry with case-exact name
linux-manual-3.16 / d_add_unique(9): Add dentry to hash queues without aliasing
linux-manual-3.16 / d_alloc(9): Allocate a dcache entry
linux-manual-3.16 / d_alloc_pseudo(9): Allocate a dentry (for lookup-less filesystems)
linux-manual-3.16 / d_backing_dentry(9): Get upper or lower dentry we should be using
linux-manual-3.16 / d_backing_inode(9): Get upper or lower inode we should be using
linux-manual-3.16 / d_delete(9): Delete a dentry
linux-manual-3.16 / d_find_any_alias(9): Find any alias for a given inode
linux-manual-3.16 / d_hash_and_lookup(9): Hash the qstr then search for a dentry
linux-manual-3.16 / d_inode(9): Get the actual inode of this dentry
linux-manual-3.16 / d_inode_rcu(9): Get the actual inode of this dentry with access_once
linux-manual-3.16 / d_instantiate(9): Fill in inode information for a dentry
linux-manual-3.16 / d_instantiate_no_diralias(9): Instantiate a non-aliased dentry
linux-manual-3.16 / d_invalidate(9): Invalidate a dentry
linux-manual-3.16 / d_lookup(9): Search for a dentry
linux-manual-3.16 / d_materialise_unique(9): Introduce an inode into the tree
linux-manual-3.16 / d_obtain_alias(9): Find or allocate a dentry for a given inode
linux-manual-3.16 / d_path(9): Return the path of a dentry
linux-manual-3.16 / d_rehash(9): Add an entry back to the hash
linux-manual-3.16 / d_splice_alias(9): Splice a disconnected dentry into the tree if one exists
linux-manual-3.16 / d_unhashed(9): Is dentry hashed
linux-manual-3.16 / d_validate(9): Verify dentry provided from insecure source (deprecated)
linux-manual-3.16 / datagram_poll(9): Generic datagram poll
linux-manual-3.16 / deactivate_locked_super(9): Drop an active reference to superblock
linux-manual-3.16 / deactivate_super(9): Drop an active reference to superblock
linux-manual-3.16 / debug_object_activate(9): Debug checks when an object is activated
linux-manual-3.16 / debug_object_active_state(9): Debug checks object usage state machine
linux-manual-3.16 / debug_object_assert_init(9): Debug checks when object should be init-ed
linux-manual-3.16 / debug_object_deactivate(9): Debug checks when an object is deactivated
linux-manual-3.16 / debug_object_destroy(9): Debug checks when an object is destroyed
linux-manual-3.16 / debug_object_free(9): Debug checks when an object is freed
linux-manual-3.16 / debug_object_init(9): Debug checks when an object is initialized
linux-manual-3.16 / debug_object_init_on_stack(9): Debug checks when an object on stack is initialized
linux-manual-3.16 / debugfs_create_atomic_t(9): Create a debugfs file that is used to read and write an atomic_t value
linux-manual-3.16 / debugfs_create_blob(9): Create a debugfs file that is used to read a binary blob
linux-manual-3.16 / debugfs_create_bool(9): Create a debugfs file that is used to read and write a boolean value
linux-manual-3.16 / debugfs_create_dir(9): Create a directory in the debugfs filesystem
linux-manual-3.16 / debugfs_create_file(9): Create a file in the debugfs filesystem
linux-manual-3.16 / debugfs_create_regset32(9): Create a debugfs file that returns register values
linux-manual-3.16 / debugfs_create_size_t(9): Create a debugfs file that is used to read and write an size_t value
linux-manual-3.16 / debugfs_create_symlink(9): Create a symbolic link in the debugfs filesystem
linux-manual-3.16 / debugfs_create_u16(9): Create a debugfs file that is used to read and write an unsigned 16-bit value
linux-manual-3.16 / debugfs_create_u32(9): Create a debugfs file that is used to read and write an unsigned 32-bit value
linux-manual-3.16 / debugfs_create_u32_array(9): Create a debugfs file that is used to read u32 array.
linux-manual-3.16 / debugfs_create_u64(9): Create a debugfs file that is used to read and write an unsigned 64-bit value
linux-manual-3.16 / debugfs_create_u8(9): Create a debugfs file that is used to read and write an unsigned 8-bit value
linux-manual-3.16 / debugfs_create_x16(9): Create a debugfs file that is used to read and write an unsigned 16-bit value
linux-manual-3.16 / debugfs_create_x32(9): Create a debugfs file that is used to read and write an unsigned 32-bit value
linux-manual-3.16 / debugfs_create_x64(9): Create a debugfs file that is used to read and write an unsigned 64-bit value
linux-manual-3.16 / debugfs_create_x8(9): Create a debugfs file that is used to read and write an unsigned 8-bit value
linux-manual-3.16 / debugfs_initialized(9): Tells whether debugfs has been registered
linux-manual-3.16 / debugfs_print_regs32(9): Use seq_print to describe a set of registers
linux-manual-3.16 / debugfs_remove(9): Removes a file or directory from the debugfs filesystem
linux-manual-3.16 / debugfs_remove_recursive(9): Recursively removes a directory
linux-manual-3.16 / debugfs_rename(9): Rename a file/directory in the debugfs filesystem
linux-manual-3.16 / decode_rs16(9): Decode codeword (16bit data width)
linux-manual-3.16 / decode_rs8(9): Decode codeword (8bit data width)
linux-manual-3.16 / del_timer(9): Deactive a timer.
linux-manual-3.16 / del_timer_sync(9): Deactivate a timer and wait for the handler to finish.
linux-manual-3.16 / delete_from_page_cache(9): Delete page from page cache
linux-manual-3.16 / dentry_update_name_case(9): Update case insensitive dentry with a new name
linux-manual-3.16 / destroy_rcu_head_on_stack(9): Destroy on-stack rcu_head for debugobjects
linux-manual-3.16 / destroy_workqueue(9): Safely terminate a workqueue
linux-manual-3.16 / dev_add_offload(9): Register offload handlers
linux-manual-3.16 / dev_add_pack(9): Add packet handler
linux-manual-3.16 / dev_alloc_name(9): Allocate a name for a device
linux-manual-3.16 / dev_change_carrier(9): Change device carrier
linux-manual-3.16 / dev_change_flags(9): Change device settings
linux-manual-3.16 / dev_change_net_namespace(9): Move device to different nethost namespace
linux-manual-3.16 / dev_close(9): Shutdown an interface.
linux-manual-3.16 / dev_disable_lro(9): Disable large receive offload on a device
linux-manual-3.16 / dev_driver_string(9): Return a devices driver name, if at all possible
linux-manual-3.16 / dev_forward_skb(9): Loopback an skb to another netif
linux-manual-3.16 / dev_get_by_flags_rcu(9): Find any device with given flags
linux-manual-3.16 / dev_get_by_index(9): Find a device by its ifindex
linux-manual-3.16 / dev_get_by_index_rcu(9): Find a device by its ifindex
linux-manual-3.16 / dev_get_by_name(9): Find a device by its name
linux-manual-3.16 / dev_get_by_name_rcu(9): Find a device by its name
linux-manual-3.16 / dev_get_flags(9): Get flags reported to userspace
linux-manual-3.16 / dev_get_phys_port_id(9): Get device physical port id
linux-manual-3.16 / dev_get_stats(9): Get network device statistics
linux-manual-3.16 / dev_getbyhwaddr_rcu(9): Find a device by its hardware address
linux-manual-3.16 / dev_hold(9): Get reference to device
linux-manual-3.16 / dev_loopback_xmit(9): Loop back skb
linux-manual-3.16 / dev_open(9): Prepare an interface for use.
linux-manual-3.16 / dev_put(9): Release reference to device
linux-manual-3.16 / dev_remove_offload(9): Remove packet offload handler
linux-manual-3.16 / dev_remove_pack(9): Remove packet handler
linux-manual-3.16 / dev_set_allmulti(9): Update allmulti count on a device
linux-manual-3.16 / dev_set_group(9): Change group this device belongs to
linux-manual-3.16 / dev_set_mac_address(9): Change media access control address
linux-manual-3.16 / dev_set_mtu(9): Change maximum transfer unit
linux-manual-3.16 / dev_set_name(9): Set a device name
linux-manual-3.16 / dev_set_promiscuity(9): Update promiscuity count on a device
linux-manual-3.16 / dev_valid_name(9): Check if name is okay for network device
linux-manual-3.16 / device_add(9): Add device to device hierarchy.
linux-manual-3.16 / device_attach(9): Try to attach device to a driver.
linux-manual-3.16 / device_bind_driver(9): Bind a driver to one device.
linux-manual-3.16 / device_create(9): Creates a device and registers it with sysfs
linux-manual-3.16 / device_create_bin_file(9): Create sysfs binary attribute file for device.
linux-manual-3.16 / device_create_file(9): Create sysfs attribute file for device.
linux-manual-3.16 / device_create_vargs(9): Creates a device and registers it with sysfs
linux-manual-3.16 / device_create_with_groups(9): Creates a device and registers it with sysfs
linux-manual-3.16 / device_del(9): Delete device from system.
linux-manual-3.16 / device_destroy(9): Removes a device that was created with device_create
linux-manual-3.16 / device_find_child(9): Device iterator for locating a particular device.
linux-manual-3.16 / device_for_each_child(9): Device child iterator.
linux-manual-3.16 / device_initialize(9): Init device structure.
linux-manual-3.16 / device_move(9): Moves a device to a new parent
linux-manual-3.16 / device_pm_wait_for_dev(9): Wait for suspend/resume of a device to complete.
linux-manual-3.16 / device_register(9): Register a device with the system.
linux-manual-3.16 / device_release_driver(9): Manually detach device from driver.
linux-manual-3.16 / device_remove_bin_file(9): Remove sysfs binary attribute file
linux-manual-3.16 / device_remove_file(9): Remove sysfs attribute file.
linux-manual-3.16 / device_remove_file_self(9): Remove sysfs attribute file from its own method.
linux-manual-3.16 / device_rename(9): Renames a device
linux-manual-3.16 / device_reprobe(9): Remove driver for a device and probe for a new driver
linux-manual-3.16 / device_unregister(9): Unregister device from system.
linux-manual-3.16 / devm_add_action(9): Add a custom action to list of managed resources
linux-manual-3.16 / devm_clk_get(9): Lookup and obtain a managed reference to a clock producer.
linux-manual-3.16 / devm_clk_put(9): "free" a managed clock source
linux-manual-3.16 / devm_free_pages(9): Resource-managed free_pages
linux-manual-3.16 / devm_get_free_pages(9): Resource-managed __get_free_pages
linux-manual-3.16 / devm_input_allocate_device(9): Allocate managed input device
linux-manual-3.16 / devm_input_allocate_polled_device(9): Allocate managed polled device
linux-manual-3.16 / devm_kfree(9): Resource-managed kfree
linux-manual-3.16 / devm_kmalloc(9): Resource-managed kmalloc
linux-manual-3.16 / devm_kmemdup(9): Resource-managed kmemdup
linux-manual-3.16 / devm_kstrdup(9): Allocate resource managed space and copy an existing string into that.
linux-manual-3.16 / devm_mdiobus_alloc_size(9): Resource-managed mdiobus_alloc_size
linux-manual-3.16 / devm_mdiobus_free(9): Resource-managed mdiobus_free
linux-manual-3.16 / devm_remove_action(9): Removes previously added custom action
linux-manual-3.16 / devm_spi_register_master(9): Register managed spi master controller
linux-manual-3.16 / devres_add(9): Register device resource
linux-manual-3.16 / devres_alloc(9): Allocate device resource data
linux-manual-3.16 / devres_close_group(9): Close a devres group
linux-manual-3.16 / devres_destroy(9): Find a device resource and destroy it
linux-manual-3.16 / devres_find(9): Find device resource
linux-manual-3.16 / devres_for_each_res(9): Resource iterator
linux-manual-3.16 / devres_free(9): Free device resource data
linux-manual-3.16 / devres_get(9): Find devres, if non-existent, add one atomically
linux-manual-3.16 / devres_open_group(9): Open a new devres group
linux-manual-3.16 / devres_release(9): Find a device resource and destroy it, calling release
linux-manual-3.16 / devres_release_group(9): Release resources in a devres group
linux-manual-3.16 / devres_remove(9): Find a device resource and remove it
linux-manual-3.16 / devres_remove_group(9): Remove a devres group
linux-manual-3.16 / dget_dlock(9): Get a reference to a dentry
linux-manual-3.16 / disable_cmf(9): Switch off the channel measurement for a specific device
linux-manual-3.16 / disable_irq(9): Disable an irq and wait for completion
linux-manual-3.16 / disable_irq_nosync(9): Disable an irq without waiting
linux-manual-3.16 / disk_block_events(9): Block and flush disk event checking
linux-manual-3.16 / disk_clear_events(9): Synchronously check, clear and return pending events
linux-manual-3.16 / disk_expand_part_tbl(9): Expand disk-part_tbl
linux-manual-3.16 / disk_flush_events(9): Schedule immediate event checking and flushing
linux-manual-3.16 / disk_get_part(9): Get partition
linux-manual-3.16 / disk_map_sector_rcu(9): Map sector to partition
linux-manual-3.16 / disk_part_iter_exit(9): Finish up partition iteration
linux-manual-3.16 / disk_part_iter_init(9): Initialize partition iterator
linux-manual-3.16 / disk_part_iter_next(9): Proceed iterator to the next partition and return it
linux-manual-3.16 / disk_replace_part_tbl(9): Replace disk-part_tbl in rcu-safe way
linux-manual-3.16 / disk_stack_limits(9): Adjust queue limits for stacked drivers
linux-manual-3.16 / disk_unblock_events(9): Unblock disk event checking
linux-manual-3.16 / dma_alloc_from_coherent(9): Try to allocate memory from the per-device coherent area
linux-manual-3.16 / dma_buf_attach(9): Add the device to dma_bufs attachments list; optionally, calls attach of dma_buf_ops to allow device-specific attach functionality
linux-manual-3.16 / dma_buf_begin_cpu_access(9): Must be called before accessing a dma_buf from the cpu in the kernel context. calls begin_cpu_access to allow exporter-specific preparations. coherency is only guaranteed in the specified range for the specified access direction.
linux-manual-3.16 / dma_buf_detach(9): Remove the given attachment from dmabufs attachments list; optionally calls detach of dma_buf_ops for device-specific detach
linux-manual-3.16 / dma_buf_end_cpu_access(9): Must be called after accessing a dma_buf from the cpu in the kernel context. calls end_cpu_access to allow exporter-specific actions. coherency is only guaranteed in the specified range for the specified access direction.
linux-manual-3.16 / dma_buf_export_named(9): Creates a new dma_buf, and associates an anon file with this buffer, so it can be exported. also connect the allocator specific data and ops to the buffer. additionally, provide a name string for exporter; useful in debugging.
linux-manual-3.16 / dma_buf_fd(9): Returns a file descriptor for the given dma_buf
linux-manual-3.16 / dma_buf_get(9): Returns the dma_buf structure related to an fd
linux-manual-3.16 / dma_buf_kmap(9): Map a page of the buffer object into kernel address space. the same restrictions as for kmap and friends apply.
linux-manual-3.16 / dma_buf_kmap_atomic(9): Map a page of the buffer object into kernel address space. the same restrictions as for kmap_atomic and friends apply.
linux-manual-3.16 / dma_buf_kunmap(9): Unmap a page obtained by dma_buf_kmap.
linux-manual-3.16 / dma_buf_kunmap_atomic(9): Unmap a page obtained by dma_buf_kmap_atomic.
linux-manual-3.16 / dma_buf_map_attachment(9): Returns the scatterlist table of the attachment; mapped into _device_ address space. is a wrapper for map_dma_buf of the dma_buf_ops.
linux-manual-3.16 / dma_buf_mmap(9): Setup up a userspace mmap with the given vma
linux-manual-3.16 / dma_buf_put(9): Decreases refcount of the buffer
linux-manual-3.16 / dma_buf_unmap_attachment(9): Unmaps and decreases usecount of the buffer;might deallocate the scatterlist associated. is a wrapper for unmap_dma_buf of dma_buf_ops.
linux-manual-3.16 / dma_buf_vmap(9): Create virtual mapping for the buffer object into kernel address space. same restrictions as for vmap and friends apply.
linux-manual-3.16 / dma_buf_vunmap(9): Unmap a vmap obtained by dma_buf_vmap.
linux-manual-3.16 / dma_mmap_from_coherent(9): Try to mmap the memory allocated from per-device coherent memory pool to userspace
linux-manual-3.16 / dma_pool_alloc(9): Get a block of consistent memory
linux-manual-3.16 / dma_pool_create(9): Creates a pool of consistent memory blocks, for dma.
linux-manual-3.16 / dma_pool_destroy(9): Destroys a pool of dma memory blocks.
linux-manual-3.16 / dma_pool_free(9): Put block back into dma pool
linux-manual-3.16 / dma_release_from_coherent(9): Try to free the memory allocated from per-device coherent memory pool
linux-manual-3.16 / dmam_alloc_coherent(9): Managed dma_alloc_coherent
linux-manual-3.16 / dmam_alloc_noncoherent(9): Managed dma_alloc_non_coherent
linux-manual-3.16 / dmam_declare_coherent_memory(9): Managed dma_declare_coherent_memory
linux-manual-3.16 / dmam_free_coherent(9): Managed dma_free_coherent
linux-manual-3.16 / dmam_free_noncoherent(9): Managed dma_free_noncoherent
linux-manual-3.16 / dmam_pool_create(9): Managed dma_pool_create
linux-manual-3.16 / dmam_pool_destroy(9): Managed dma_pool_destroy
linux-manual-3.16 / dmam_release_declared_memory(9): Managed dma_release_declared_memory.
linux-manual-3.16 / dmi_check_system(9): Check system dmi data
linux-manual-3.16 / dmi_find_device(9): Find onboard device by type/name
linux-manual-3.16 / dmi_first_match(9): Find dmi_system_id structure matching system dmi data
linux-manual-3.16 / dmi_get_date(9): Parse a dmi date
linux-manual-3.16 / dmi_get_system_info(9): Return dmi data value
linux-manual-3.16 / dmi_match(9): Compare a string to the dmi field (if exists)
linux-manual-3.16 / dmi_name_in_vendors(9): Check if string is in the dmi system or board vendor name
linux-manual-3.16 / dmi_walk(9): Walk the dmi table and get called back for every record
linux-manual-3.16 / do_jobctl_trap(9): Take care of ptrace jobctl traps
linux-manual-3.16 / do_notify_parent_cldstop(9): Notify parent of stopped/continued state change
linux-manual-3.16 / do_pata_set_dmamode(9): Initialize host controller pata pio timings
linux-manual-3.16 / do_signal_stop(9): Handle group stop for sigstop and other stop signals
linux-manual-3.16 / do_sigtimedwait(9): Wait for queued signals specified in which
linux-manual-3.16 / do_splice_direct(9): Splices data directly between two files
linux-manual-3.16 / dpm_for_each_dev(9): Device iterator.
linux-manual-3.16 / dpm_resume_end(9): Execute resume callbacks and complete system transition.
linux-manual-3.16 / dpm_resume_start(9): Execute noirq and early device callbacks.
linux-manual-3.16 / dpm_suspend_end(9): Execute late and noirq device suspend callbacks.
linux-manual-3.16 / dpm_suspend_start(9): Prepare devices for pm transition and suspend them.
linux-manual-3.16 / drain_workqueue(9): Drain a workqueue
linux-manual-3.16 / driver_attach(9): Try to bind driver to devices.
linux-manual-3.16 / driver_create_file(9): Create sysfs file for driver.
linux-manual-3.16 / driver_find(9): Locate driver on a bus by its name.
linux-manual-3.16 / driver_find_device(9): Device iterator for locating a particular device.
linux-manual-3.16 / driver_for_each_device(9): Iterator for devices bound to a driver.
linux-manual-3.16 / driver_init(9): Initialize driver model.
linux-manual-3.16 / driver_register(9): Register driver with bus
linux-manual-3.16 / driver_remove_file(9): Remove sysfs file for driver.
linux-manual-3.16 / driver_unregister(9): Remove driver from system.
linux-manual-3.16 / drm_add_edid_modes(9): Add modes from edid data, if available
linux-manual-3.16 / drm_add_modes_noedid(9): Add modes for the connectors without edid
linux-manual-3.16 / drm_av_sync_delay(9): Compute the hdmi/dp sink audio-video sync delay
linux-manual-3.16 / drm_bridge_cleanup(9): Cleans up an initialised bridge
linux-manual-3.16 / drm_bridge_init(9): Initialize a drm transcoder/bridge
linux-manual-3.16 / drm_calc_timestamping_constants(9): Calculate vblank timestamp constants
linux-manual-3.16 / drm_calc_vbltimestamp_from_scanoutpos(9): Precise vblank timestamp helper
linux-manual-3.16 / drm_connector_cleanup(9): Cleans up an initialised connector
linux-manual-3.16 / drm_connector_init(9): Init a preallocated connector
linux-manual-3.16 / drm_connector_unplug_all(9): Unregister connector userspace interfaces
linux-manual-3.16 / drm_crtc_check_viewport(9): Checks that a framebuffer is big enough for the crtc viewport
linux-manual-3.16 / drm_crtc_cleanup(9): Clean up the core crtc usage
linux-manual-3.16 / drm_crtc_helper_set_config(9): Set a new config from userspace
linux-manual-3.16 / drm_crtc_helper_set_mode(9): Internal helper to set a mode
linux-manual-3.16 / drm_crtc_index(9): Find the index of a registered crtc
linux-manual-3.16 / drm_crtc_init(9): Legacy crtc initialization function
linux-manual-3.16 / drm_crtc_init_with_planes(9): Initialise a new crtc object with specified primary and cursor planes.
linux-manual-3.16 / drm_crtc_vblank_get(9): Get a reference count on vblank events
linux-manual-3.16 / drm_crtc_vblank_off(9): Disable vblank events on a crtc
linux-manual-3.16 / drm_crtc_vblank_on(9): Enable vblank events on a crtc
linux-manual-3.16 / drm_crtc_vblank_put(9): Give up ownership of vblank events
linux-manual-3.16 / drm_cvt_mode(9): Create a modeline based on the cvt algorithm
linux-manual-3.16 / drm_detect_hdmi_monitor(9): Detect whether monitor is hdmi
linux-manual-3.16 / drm_detect_monitor_audio(9): Check monitor audio capability
linux-manual-3.16 / drm_dev_alloc(9): Allocate new drm device
linux-manual-3.16 / drm_dev_ref(9): Take reference of a drm device
linux-manual-3.16 / drm_dev_register(9): Register drm device
linux-manual-3.16 / drm_dev_set_unique(9): Set the unique name of a drm device
linux-manual-3.16 / drm_dev_unref(9): Drop reference of a drm device
linux-manual-3.16 / drm_dev_unregister(9): Unregister drm device
linux-manual-3.16 / drm_display_mode_from_videomode(9): Fill in dmode using vm,
linux-manual-3.16 / drm_dp_aux_register(9): Initialise and register aux channel
linux-manual-3.16 / drm_dp_aux_unregister(9): Unregister an aux adapter
linux-manual-3.16 / drm_dp_dpcd_read(9): Read a series of bytes from the dpcd
linux-manual-3.16 / drm_dp_dpcd_read_link_status(9): Read dpcd link status (bytes 0x202-0x207)
linux-manual-3.16 / drm_dp_dpcd_readb(9): Read a single byte from the dpcd
linux-manual-3.16 / drm_dp_dpcd_write(9): Write a series of bytes to the dpcd
linux-manual-3.16 / drm_dp_dpcd_writeb(9): Write a single byte to the dpcd
linux-manual-3.16 / drm_dp_link_configure(9): Configure a displayport link
linux-manual-3.16 / drm_dp_link_power_up(9): Power up a displayport link
linux-manual-3.16 / drm_dp_link_probe(9): Probe a displayport link for capabilities
linux-manual-3.16 / drm_edid_block_valid(9): Sanity check the edid block (base or extension)
linux-manual-3.16 / drm_edid_duplicate(9): Duplicate an edid and the extensions
linux-manual-3.16 / drm_edid_header_is_valid(9): Sanity check the header of the base edid block
linux-manual-3.16 / drm_edid_is_valid(9): Sanity check edid data
linux-manual-3.16 / drm_edid_to_eld(9): Build eld from edid
linux-manual-3.16 / drm_edid_to_sad(9): Extracts sads from edid
linux-manual-3.16 / drm_edid_to_speaker_allocation(9): Extracts speaker allocation data blocks from edid
linux-manual-3.16 / drm_encoder_cleanup(9): Cleans up an initialised encoder
linux-manual-3.16 / drm_encoder_init(9): Init a preallocated encoder
linux-manual-3.16 / drm_fb_get_bpp_depth(9): Get the bpp/depth values for format
linux-manual-3.16 / drm_fb_helper_blank(9): Implementation for -fb_blank
linux-manual-3.16 / drm_fb_helper_check_var(9): Implementation for -fb_check_var
linux-manual-3.16 / drm_fb_helper_debug_enter(9): Implementation for -fb_debug_enter
linux-manual-3.16 / drm_fb_helper_debug_leave(9): Implementation for -fb_debug_leave
linux-manual-3.16 / drm_fb_helper_fill_fix(9): Initializes fixed fbdev information
linux-manual-3.16 / drm_fb_helper_fill_var(9): Initalizes variable fbdev information
linux-manual-3.16 / drm_fb_helper_hotplug_event(9): Respond to a hotplug notification by probing all the outputs attached to the fb
linux-manual-3.16 / drm_fb_helper_init(9): Initialize a drm_fb_helper structure
linux-manual-3.16 / drm_fb_helper_initial_config(9): Setup a sane initial connector configuration
linux-manual-3.16 / drm_fb_helper_pan_display(9): Implementation for -fb_pan_display
linux-manual-3.16 / drm_fb_helper_restore_fbdev_mode_unlocked(9): Restore fbdev configuration
linux-manual-3.16 / drm_fb_helper_set_par(9): Implementation for -fb_set_par
linux-manual-3.16 / drm_fb_helper_setcmap(9): Implementation for -fb_setcmap
linux-manual-3.16 / drm_fb_helper_single_add_all_connectors(9): Add all connectors to fbdev emulation helper
linux-manual-3.16 / drm_flip_work_cleanup(9): Cleans up flip-work
linux-manual-3.16 / drm_flip_work_commit(9): Commit queued work
linux-manual-3.16 / drm_flip_work_init(9): Initialize flip-work
linux-manual-3.16 / drm_flip_work_queue(9): Queue work
linux-manual-3.16 / drm_format_horz_chroma_subsampling(9): Get the horizontal chroma subsampling factor
linux-manual-3.16 / drm_format_num_planes(9): Get the number of planes for format
linux-manual-3.16 / drm_format_plane_cpp(9): Determine the bytes per pixel value
linux-manual-3.16 / drm_format_vert_chroma_subsampling(9): Get the vertical chroma subsampling factor
linux-manual-3.16 / drm_framebuffer_cleanup(9): Remove a framebuffer object
linux-manual-3.16 / drm_framebuffer_init(9): Initialize a framebuffer
linux-manual-3.16 / drm_framebuffer_lookup(9): Look up a drm framebuffer and grab a reference
linux-manual-3.16 / drm_framebuffer_reference(9): Incr the fb refcnt
linux-manual-3.16 / drm_framebuffer_remove(9): Remove and unreference a framebuffer object
linux-manual-3.16 / drm_framebuffer_unreference(9): Unref a framebuffer
linux-manual-3.16 / drm_framebuffer_unregister_private(9): Unregister a private fb from the lookup idr
linux-manual-3.16 / drm_gem_create_mmap_offset(9): Create a fake mmap offset for an object
linux-manual-3.16 / drm_gem_create_mmap_offset_size(9): Create a fake mmap offset for an object
linux-manual-3.16 / drm_gem_dmabuf_release(9): Dma_buf release implementation for gem
linux-manual-3.16 / drm_gem_dumb_destroy(9): Dumb fb callback helper for gem based drivers
linux-manual-3.16 / drm_gem_free_mmap_offset(9): Release a fake mmap offset for an object
linux-manual-3.16 / drm_gem_get_pages(9): Helper to allocate backing pages for a gem object from shmem
linux-manual-3.16 / drm_gem_handle_create(9): Create a gem handle for an object
linux-manual-3.16 / drm_gem_handle_delete(9): Deletes the given file-private handle
linux-manual-3.16 / drm_gem_mmap(9): Memory map routine for gem objects
linux-manual-3.16 / drm_gem_mmap_obj(9): Memory map a gem object
linux-manual-3.16 / drm_gem_object_free(9): Free a gem object
linux-manual-3.16 / drm_gem_object_init(9): Initialize an allocated shmem-backed gem object
linux-manual-3.16 / drm_gem_prime_export(9): Helper library implemention of the export callback
linux-manual-3.16 / drm_gem_prime_fd_to_handle(9): Prime import function for gem drivers
linux-manual-3.16 / drm_gem_prime_handle_to_fd(9): Prime export function for gem drivers
linux-manual-3.16 / drm_gem_prime_import(9): Helper library implemention of the import callback
linux-manual-3.16 / drm_gem_private_object_init(9): Initialize an allocated private gem object
linux-manual-3.16 / drm_gem_put_pages(9): Helper to free backing pages for a gem object
linux-manual-3.16 / drm_get_cea_aspect_ratio(9): Get the picture aspect ratio corresponding to the input vic from the cea mode list
linux-manual-3.16 / drm_get_connector_status_name(9): Return a string for connector status
linux-manual-3.16 / drm_get_edid(9): Get edid data, if available
linux-manual-3.16 / drm_get_format_name(9): Return a string for drm fourcc format
linux-manual-3.16 / drm_get_last_vbltimestamp(9): Retrieve raw timestamp for the most recent vblank interval
linux-manual-3.16 / drm_get_pci_dev(9): Register a pci device with the drm subsystem
linux-manual-3.16 / drm_get_subpixel_order_name(9): Return a string for a given subpixel enum
linux-manual-3.16 / drm_gtf_mode(9): Create the modeline based on the gtf algorithm
linux-manual-3.16 / drm_gtf_mode_complex(9): Create the modeline based on the full gtf algorithm
linux-manual-3.16 / drm_handle_vblank(9): Handle a vblank event
linux-manual-3.16 / drm_hdmi_avi_infoframe_from_display_mode(9): Fill an hdmi avi infoframe with data from a drm display mode
linux-manual-3.16 / drm_hdmi_vendor_infoframe_from_display_mode(9): Fill an hdmi infoframe with data from a drm display mode
linux-manual-3.16 / drm_helper_connector_dpms(9): Connector dpms helper implementation
linux-manual-3.16 / drm_helper_crtc_in_use(9): Check if a given crtc is in a mode_config
linux-manual-3.16 / drm_helper_disable_unused_functions(9): Disable unused objects
linux-manual-3.16 / drm_helper_encoder_in_use(9): Check if a given encoder is in use
linux-manual-3.16 / drm_helper_hpd_irq_event(9): Hotplug processing
linux-manual-3.16 / drm_helper_mode_fill_fb_struct(9): Fill out framebuffer metadata
linux-manual-3.16 / drm_helper_move_panel_connectors_to_head(9): Move panels to the front in the connector list
linux-manual-3.16 / drm_helper_probe_single_connector_modes(9): Get complete set of display modes
linux-manual-3.16 / drm_helper_probe_single_connector_modes_nomerge(9): Get complete set of display modes
linux-manual-3.16 / drm_helper_resume_force_mode(9): Force-restore mode setting configuration
linux-manual-3.16 / drm_irq_install(9): Install irq handler
linux-manual-3.16 / drm_irq_uninstall(9): Uninstall the irq handler
linux-manual-3.16 / drm_kms_helper_hotplug_event(9): Fire off kms hotplug events
linux-manual-3.16 / drm_kms_helper_poll_disable(9): Disable output polling
linux-manual-3.16 / drm_kms_helper_poll_enable(9): Re-enable output polling.
linux-manual-3.16 / drm_kms_helper_poll_fini(9): Disable output polling and clean it up
linux-manual-3.16 / drm_kms_helper_poll_init(9): Initialize and enable output polling
linux-manual-3.16 / drm_match_cea_mode(9): Look for a cea mode matching given mode
linux-manual-3.16 / drm_mm_clean(9): Checks whether an allocator is clean
linux-manual-3.16 / drm_mm_debug_table(9): Dump allocator state to dmesg
linux-manual-3.16 / drm_mm_dump_table(9): Dump allocator state to a seq_file
linux-manual-3.16 / drm_mm_for_each_hole(9): Iterator to walk over all holes
linux-manual-3.16 / drm_mm_for_each_node(9): Iterator to walk over all allocated nodes
linux-manual-3.16 / drm_mm_hole_node_end(9): Computes the end of the hole following node
linux-manual-3.16 / drm_mm_hole_node_start(9): Computes the start of the hole following node
linux-manual-3.16 / drm_mm_init(9): Initialize a drm-mm allocator
linux-manual-3.16 / drm_mm_init_scan(9): Initialize lru scanning
linux-manual-3.16 / drm_mm_init_scan_with_range(9): Initialize range-restricted lru scanning
linux-manual-3.16 / drm_mm_initialized(9): Checks whether an allocator is initialized
linux-manual-3.16 / drm_mm_insert_node(9): Search for space and insert node
linux-manual-3.16 / drm_mm_insert_node_generic(9): Search for space and insert node
linux-manual-3.16 / drm_mm_insert_node_in_range(9): Ranged search for space and insert node
linux-manual-3.16 / drm_mm_insert_node_in_range_generic(9): Ranged search for space and insert node
linux-manual-3.16 / drm_mm_node_allocated(9): Checks whether a node is allocated
linux-manual-3.16 / drm_mm_remove_node(9): Remove a memory node from the allocator.
linux-manual-3.16 / drm_mm_replace_node(9): Move an allocation from old to new
linux-manual-3.16 / drm_mm_reserve_node(9): Insert an pre-initialized node
linux-manual-3.16 / drm_mm_scan_add_block(9): Add a node to the scan list
linux-manual-3.16 / drm_mm_scan_remove_block(9): Remove a node from the scan list
linux-manual-3.16 / drm_mm_takedown(9): Clean up a drm_mm allocator
linux-manual-3.16 / drm_mode_config_cleanup(9): Free up drm mode_config info
linux-manual-3.16 / drm_mode_config_init(9): Initialize drm mode_configuration structure
linux-manual-3.16 / drm_mode_config_reset(9): Call -reset callbacks
linux-manual-3.16 / drm_mode_connector_attach_encoder(9): Attach a connector to an encoder
linux-manual-3.16 / drm_mode_connector_list_update(9): Update the mode list for the connector
linux-manual-3.16 / drm_mode_connector_update_edid_property(9): Update the edid property of a connector
linux-manual-3.16 / drm_mode_copy(9): Copy the mode
linux-manual-3.16 / drm_mode_create(9): Create a new display mode
linux-manual-3.16 / drm_mode_create_dirty_info_property(9): Create dirty property
linux-manual-3.16 / drm_mode_create_dvi_i_properties(9): Create dvi-i specific connector properties
linux-manual-3.16 / drm_mode_create_from_cmdline_mode(9): Convert a command line modeline into a drm display mode
linux-manual-3.16 / drm_mode_create_scaling_mode_property(9): Create scaling mode property
linux-manual-3.16 / drm_mode_create_tv_properties(9): Create tv specific connector properties
linux-manual-3.16 / drm_mode_crtc_set_gamma_size(9): Set the gamma table size
linux-manual-3.16 / drm_mode_debug_printmodeline(9): Print a mode to dmesg
linux-manual-3.16 / drm_mode_destroy(9): Remove a mode
linux-manual-3.16 / drm_mode_duplicate(9): Allocate and duplicate an existing mode
linux-manual-3.16 / drm_mode_equal(9): Test modes for equality
linux-manual-3.16 / drm_mode_equal_no_clocks_no_stereo(9): Test modes for equality
linux-manual-3.16 / drm_mode_is_stereo(9): Check for stereo mode flags
linux-manual-3.16 / drm_mode_legacy_fb_format(9): Compute drm fourcc code from legacy description
linux-manual-3.16 / drm_mode_object_find(9): Look up a drm object with static lifetime
linux-manual-3.16 / drm_mode_parse_command_line_for_connector(9): Parse command line modeline for connector
linux-manual-3.16 / drm_mode_probed_add(9): Add a mode to a connectors probed_mode list
linux-manual-3.16 / drm_mode_prune_invalid(9): Remove invalid modes from mode list
linux-manual-3.16 / drm_mode_set_config_internal(9): Helper to call -set_config
linux-manual-3.16 / drm_mode_set_crtcinfo(9): Set crtc modesetting timing parameters
linux-manual-3.16 / drm_mode_set_name(9): Set the name on a mode
linux-manual-3.16 / drm_mode_sort(9): Sort mode list
linux-manual-3.16 / drm_mode_validate_size(9): Make sure modes adhere to size constraints
linux-manual-3.16 / drm_mode_vrefresh(9): Get the vrefresh of a mode
linux-manual-3.16 / drm_modeset_acquire_fini(9): Cleanup acquire context
linux-manual-3.16 / drm_modeset_acquire_init(9): Initialize acquire context
linux-manual-3.16 / drm_modeset_backoff(9): Deadlock avoidance backoff
linux-manual-3.16 / drm_modeset_backoff_interruptible(9): Deadlock avoidance backoff
linux-manual-3.16 / drm_modeset_drop_locks(9): Drop all locks
linux-manual-3.16 / drm_modeset_is_locked(9): Equivalent to mutex_is_locked
linux-manual-3.16 / drm_modeset_lock(9): Take modeset lock
linux-manual-3.16 / drm_modeset_lock_all(9): Take all modeset locks
linux-manual-3.16 / drm_modeset_lock_fini(9): Cleanup lock
linux-manual-3.16 / drm_modeset_lock_init(9): Initialize lock
linux-manual-3.16 / drm_modeset_lock_interruptible(9): Take modeset lock
linux-manual-3.16 / drm_modeset_unlock(9): Drop modeset lock
linux-manual-3.16 / drm_modeset_unlock_all(9): Drop all modeset locks
linux-manual-3.16 / drm_object_attach_property(9): Attach a property to a modeset object
linux-manual-3.16 / drm_object_property_get_value(9): Retrieve the value of a property
linux-manual-3.16 / drm_object_property_set_value(9): Set the value of a property
linux-manual-3.16 / drm_pci_alloc(9): Allocate a pci consistent memory block, for dma.
linux-manual-3.16 / drm_pci_exit(9): Unregister matching pci devices from the drm subsystem
linux-manual-3.16 / drm_pci_free(9): Free a pci consistent memory block
linux-manual-3.16 / drm_pci_init(9): Register matching pci devices with the drm subsystem
linux-manual-3.16 / drm_plane_cleanup(9): Clean up the core plane usage
linux-manual-3.16 / drm_plane_force_disable(9): Forcibly disable a plane
linux-manual-3.16 / drm_plane_helper_check_update(9): Check plane update for validity
linux-manual-3.16 / drm_plane_init(9): Initialize a legacy plane
linux-manual-3.16 / drm_platform_init(9): Register a platform device with the drm subsystem
linux-manual-3.16 / drm_primary_helper_create_plane(9): Create a generic primary plane
linux-manual-3.16 / drm_primary_helper_destroy(9): Helper for primary plane destruction
linux-manual-3.16 / drm_primary_helper_disable(9): Helper for primary plane disable
linux-manual-3.16 / drm_primary_helper_update(9): Helper for primary plane update
linux-manual-3.16 / drm_prime_gem_destroy(9): Helper to clean up a prime-imported gem object
linux-manual-3.16 / drm_prime_pages_to_sg(9): Converts a page array into an sg list
linux-manual-3.16 / drm_prime_sg_to_page_addr_arrays(9): Convert an sg table into a page array
linux-manual-3.16 / drm_probe_ddc(9): Probe ddc presence
linux-manual-3.16 / drm_property_add_enum(9): Add a possible value to an enumeration property
linux-manual-3.16 / drm_property_create(9): Create a new property type
linux-manual-3.16 / drm_property_create_bitmask(9): Create a new bitmask property type
linux-manual-3.16 / drm_property_create_enum(9): Create a new enumeration property type
linux-manual-3.16 / drm_property_create_range(9): Create a new ranged property type
linux-manual-3.16 / drm_property_destroy(9): Destroy a drm property
linux-manual-3.16 / drm_put_dev(9): Unregister and release a drm device
linux-manual-3.16 / drm_rect_adjust_size(9): Adjust the size of the rectangle
linux-manual-3.16 / drm_rect_calc_hscale(9): Calculate the horizontal scaling factor
linux-manual-3.16 / drm_rect_calc_hscale_relaxed(9): Calculate the horizontal scaling factor
linux-manual-3.16 / drm_rect_calc_vscale(9): Calculate the vertical scaling factor
linux-manual-3.16 / drm_rect_calc_vscale_relaxed(9): Calculate the vertical scaling factor
linux-manual-3.16 / drm_rect_clip_scaled(9): Perform a scaled clip operation
linux-manual-3.16 / drm_rect_debug_print(9): Print the rectangle information
linux-manual-3.16 / drm_rect_downscale(9): Downscale a rectangle
linux-manual-3.16 / drm_rect_equals(9): Determine if two rectangles are equal
linux-manual-3.16 / drm_rect_height(9): Determine the rectangle height
linux-manual-3.16 / drm_rect_intersect(9): Intersect two rectangles
linux-manual-3.16 / drm_rect_translate(9): Translate the rectangle
linux-manual-3.16 / drm_rect_visible(9): Determine if the the rectangle is visible
linux-manual-3.16 / drm_rect_width(9): Determine the rectangle width
linux-manual-3.16 / drm_rgb_quant_range_selectable(9): Is rgb quantization range selectable?
linux-manual-3.16 / drm_select_eld(9): Select one eld from multiple hdmi/dp sinks
linux-manual-3.16 / drm_send_vblank_event(9): Helper to send vblank event after pageflip
linux-manual-3.16 / drm_set_preferred_mode(9): Sets the preferred mode of a connector
linux-manual-3.16 / drm_universal_plane_init(9): Initialize a new universal plane object
linux-manual-3.16 / drm_usb_exit(9): Unregister matching usb devices from the drm subsystem
linux-manual-3.16 / drm_usb_init(9): Register matching usb devices with the drm subsystem
linux-manual-3.16 / drm_vblank_cleanup(9): Cleanup vblank support
linux-manual-3.16 / drm_vblank_count(9): Retrieve cooked vblank counter value
linux-manual-3.16 / drm_vblank_count_and_time(9): Retrieve cooked vblank counter value and the system timestamp corresponding to that vblank counter value.
linux-manual-3.16 / drm_vblank_get(9): Get a reference count on vblank events
linux-manual-3.16 / drm_vblank_init(9): Initialize vblank support
linux-manual-3.16 / drm_vblank_off(9): Disable vblank events on a crtc
linux-manual-3.16 / drm_vblank_on(9): Enable vblank events on a crtc
linux-manual-3.16 / drm_vblank_post_modeset(9): Undo drm_vblank_pre_modeset changes
linux-manual-3.16 / drm_vblank_pre_modeset(9): Account for vblanks across mode sets
linux-manual-3.16 / drm_vblank_put(9): Give up ownership of vblank events
linux-manual-3.16 / drm_vma_node_allow(9): Add open-file to list of allowed users
linux-manual-3.16 / drm_vma_node_has_offset(9): Check whether node is added to offset manager
linux-manual-3.16 / drm_vma_node_is_allowed(9): Check whether an open-file is granted access
linux-manual-3.16 / drm_vma_node_offset_addr(9): Return sanitized offset for user-space mmaps
linux-manual-3.16 / drm_vma_node_reset(9): Initialize or reset node object
linux-manual-3.16 / drm_vma_node_revoke(9): Remove open-file from list of allowed users
linux-manual-3.16 / drm_vma_node_size(9): Return size (page-based)
linux-manual-3.16 / drm_vma_node_start(9): Return start address for page-based addressing
linux-manual-3.16 / drm_vma_node_unmap(9): Unmap offset node
linux-manual-3.16 / drm_vma_node_verify_access(9): Access verification helper for ttm
linux-manual-3.16 / drm_vma_offset_add(9): Add offset node to manager
linux-manual-3.16 / drm_vma_offset_exact_lookup(9): Look up node by exact address
linux-manual-3.16 / drm_vma_offset_lock_lookup(9): Lock lookup for extended private use
linux-manual-3.16 / drm_vma_offset_lookup(9): Find node in offset space
linux-manual-3.16 / drm_vma_offset_lookup_locked(9): Find node in offset space
linux-manual-3.16 / drm_vma_offset_manager_destroy(9): Destroy offset manager
linux-manual-3.16 / drm_vma_offset_manager_init(9): Initialize new offset-manager
linux-manual-3.16 / drm_vma_offset_remove(9): Remove offset node from manager
linux-manual-3.16 / drm_vma_offset_unlock_lookup(9): Unlock lookup for extended private use
linux-manual-3.16 / drm_warn_on_modeset_not_all_locked(9): Check that all modeset locks are locked
linux-manual-3.16 / drop_nlink(9): Directly drop an inodes link count
linux-manual-3.16 / edd_dev_is_type(9): Is this edd device a type device?
linux-manual-3.16 / edd_get_pci_dev(9): Finds pci_dev that matches edev
linux-manual-3.16 / edd_init(9): Creates sysfs tree of edd data
linux-manual-3.16 / edd_release(9): Free edd structure
linux-manual-3.16 / edd_show_raw_data(9): Copies raw data to buffer for userspace to parse
linux-manual-3.16 / enable_cmf(9): Switch on the channel measurement for a specific device
linux-manual-3.16 / enable_irq(9): Enable handling of an irq
linux-manual-3.16 / encode_rs16(9): Calculate the parity for data values (16bit data width)
linux-manual-3.16 / encode_rs8(9): Calculate the parity for data values (8bit data width)
linux-manual-3.16 / end_page_writeback(9): End writeback against a page
linux-manual-3.16 / enum_cfg80211_signal_type(9): Signal type
linux-manual-3.16 / enum_ieee80211_ampdu_mlme_action(9): A-mpdu actions
linux-manual-3.16 / enum_ieee80211_band(9): Supported frequency bands
linux-manual-3.16 / enum_ieee80211_channel_flags(9): Channel flags
linux-manual-3.16 / enum_ieee80211_conf_flags(9): Configuration flags
linux-manual-3.16 / enum_ieee80211_filter_flags(9): Hardware filter flags
linux-manual-3.16 / enum_ieee80211_frame_release_type(9): Frame release reason
linux-manual-3.16 / enum_ieee80211_hw_flags(9): Hardware flags
linux-manual-3.16 / enum_ieee80211_key_flags(9): Key flags
linux-manual-3.16 / enum_ieee80211_rate_control_changed(9): Flags to indicate what changed
linux-manual-3.16 / enum_ieee80211_rate_flags(9): Rate flags
linux-manual-3.16 / enum_ieee80211_smps_mode(9): Spatial multiplexing power save mode
linux-manual-3.16 / enum_ieee80211_sta_info_flags(9): Stations flags
linux-manual-3.16 / enum_ieee80211_tpt_led_trigger_flags(9): Throughput trigger flags
linux-manual-3.16 / enum_irq_gc_flags(9): Initialization flags for generic irq chips
linux-manual-3.16 / enum_mac80211_rate_control_flags(9): Per-rate flags set by the rate control algorithm.
linux-manual-3.16 / enum_mac80211_rx_flags(9): Receive flags
linux-manual-3.16 / enum_mac80211_tx_control_flags(9): Flags to describe transmit control
linux-manual-3.16 / enum_mac80211_tx_info_flags(9): Flags to describe transmission information/status
linux-manual-3.16 / enum_monitor_flags(9): Monitor flags
linux-manual-3.16 / enum_mpath_info_flags(9): Mesh path information flags
linux-manual-3.16 / enum_netdev_priv_flags(9): Struct net_device priv_flags
linux-manual-3.16 / enum_positive_aop_returns(9): Aop return codes with specific semantics
linux-manual-3.16 / enum_rate_info_flags(9): Bitrate info flags
linux-manual-3.16 / enum_set_key_cmd(9): Key command
linux-manual-3.16 / enum_sock_type(9): Socket types
linux-manual-3.16 / enum_sta_notify_cmd(9): Sta notify command
linux-manual-3.16 / enum_station_info_flags(9): Station information flags
linux-manual-3.16 / enum_survey_info_flags(9): Survey information flags
linux-manual-3.16 / enum_w1_cn_msg_flags(9): Bitfield flags for struct cn_msg.flags
linux-manual-3.16 / enum_w1_commands(9): Commands available for master or slave operations
linux-manual-3.16 / enum_w1_master_flags(9): Bitfields used in w1_master.flags
linux-manual-3.16 / enum_w1_netlink_message_types(9): Message type
linux-manual-3.16 / enum_wimax_st(9): The different states of a wimax device
linux-manual-3.16 / enum_wiphy_flags(9): Wiphy capability flags
linux-manual-3.16 / enum_wiphy_params_flags(9): Set_wiphy_params bitfield values
linux-manual-3.16 / eth_broadcast_addr(9): Assign broadcast address
linux-manual-3.16 / eth_change_mtu(9): Set new mtu size
linux-manual-3.16 / eth_commit_mac_addr_change(9): Commit mac change
linux-manual-3.16 / eth_header(9): Create the ethernet header
linux-manual-3.16 / eth_header_cache(9): Fill cache entry from neighbour
linux-manual-3.16 / eth_header_cache_update(9): Update cache entry
linux-manual-3.16 / eth_header_parse(9): Extract hardware address from packet
linux-manual-3.16 / eth_hw_addr_inherit(9): Copy dev_addr from another net_device
linux-manual-3.16 / eth_hw_addr_random(9): Generate software assigned random ethernet and set device flag
linux-manual-3.16 / eth_mac_addr(9): Set new ethernet hardware address
linux-manual-3.16 / eth_prepare_mac_addr_change(9): Prepare for mac change
linux-manual-3.16 / eth_random_addr(9): Generate software assigned random ethernet address
linux-manual-3.16 / eth_rebuild_header(9): Rebuild the ethernet mac header.
linux-manual-3.16 / eth_type_trans(9): Determine the packets protocol id.
linux-manual-3.16 / eth_zero_addr(9): Assign zero address
linux-manual-3.16 / ether_addr_copy(9): Copy an ethernet address
linux-manual-3.16 / ether_addr_equal(9): Compare two ethernet addresses
linux-manual-3.16 / ether_addr_equal_64bits(9): Compare two ethernet addresses
linux-manual-3.16 / ether_addr_equal_unaligned(9): Compare two not u16 aligned ethernet addresses
linux-manual-3.16 / ether_setup(9): Setup ethernet network device
linux-manual-3.16 / eventfd_ctx_fdget(9): Acquires a reference to the internal eventfd context.
linux-manual-3.16 / eventfd_ctx_fileget(9): Acquires a reference to the internal eventfd context.
linux-manual-3.16 / eventfd_ctx_get(9): Acquires a reference to the internal eventfd context.
linux-manual-3.16 / eventfd_ctx_put(9): Releases a reference to the internal eventfd context.
linux-manual-3.16 / eventfd_ctx_read(9): Reads the eventfd counter or wait if it is zero.
linux-manual-3.16 / eventfd_ctx_remove_wait_queue(9): Read the current counter and removes wait queue.
linux-manual-3.16 / eventfd_fget(9): Acquire a reference of an eventfd file descriptor.
linux-manual-3.16 / eventfd_signal(9): Adds n to the eventfd counter.
linux-manual-3.16 / execute_in_process_context(9): Reliably execute the routine with user context
linux-manual-3.16 / fault_in_user_writeable(9): Fault in user address and verify rw access
linux-manual-3.16 / fb_add_videomode(9): Adds videomode entry to modelist
linux-manual-3.16 / fb_copy_cmap(9): Copy a colormap
linux-manual-3.16 / fb_dealloc_cmap(9): Deallocate a colormap
linux-manual-3.16 / fb_default_cmap(9): Get default colormap
linux-manual-3.16 / fb_delete_videomode(9): Removed videomode entry from modelist
linux-manual-3.16 / fb_destroy_modelist(9): Destroy modelist
linux-manual-3.16 / fb_find_best_mode(9): Find best matching videomode
linux-manual-3.16 / fb_find_mode(9): Finds a valid video mode
linux-manual-3.16 / fb_find_nearest_mode(9): Find closest videomode
linux-manual-3.16 / fb_get_options(9): Get kernel boot parameters
linux-manual-3.16 / fb_invert_cmaps(9): Invert all defaults colormaps
linux-manual-3.16 / fb_match_mode(9): Find a videomode which exactly matches the timings in var
linux-manual-3.16 / fb_mode_is_equal(9): Compare 2 videomodes
linux-manual-3.16 / fb_set_cmap(9): Set the colormap
linux-manual-3.16 / fb_set_suspend(9): Low level driver signals suspend
linux-manual-3.16 / fb_try_mode(9): Test a video mode
linux-manual-3.16 / fb_var_to_videomode(9): Convert fb_var_screeninfo to fb_videomode
linux-manual-3.16 / fb_videomode_to_modelist(9): Convert mode array to mode list
linux-manual-3.16 / fb_videomode_to_var(9): Convert fb_videomode to fb_var_screeninfo
linux-manual-3.16 / fc_block_scsi_eh(9): Block scsi eh thread for blocked fc_rport
linux-manual-3.16 / fc_get_event_number(9): Obtain the next sequential fc event number
linux-manual-3.16 / fc_host_post_event(9): Called to post an even on an fc_host.
linux-manual-3.16 / fc_host_post_vendor_event(9): Called to post a vendor unique event on an fc_host
linux-manual-3.16 / fc_remote_port_add(9): Notify fc transport of the existence of a remote fc port.
linux-manual-3.16 / fc_remote_port_delete(9): Notifies the fc transport that a remote port is no longer in existence.
linux-manual-3.16 / fc_remote_port_rolechg(9): Notifies the fc transport that the roles on a remote may have changed.
linux-manual-3.16 / fc_remove_host(9): Called to terminate any fc_transport-related elements for a scsi host.
linux-manual-3.16 / fc_vport_create(9): Admin app or lldd requests creation of a vport
linux-manual-3.16 / fc_vport_terminate(9): Admin app or lldd requests termination of a vport
linux-manual-3.16 / fcntl_getlease(9): Enquire what lease is currently active
linux-manual-3.16 / fcntl_setlease(9): Sets a lease on an open file
linux-manual-3.16 / ffs(9): Find first set bit in word
linux-manual-3.16 / ffz(9): Find first zero bit in word
linux-manual-3.16 / file_update_time(9): Update mtime and ctime time
linux-manual-3.16 / filemap_fault(9): Read in file data for page fault handling
linux-manual-3.16 / filemap_fdatawait(9): Wait for all under-writeback pages to complete
linux-manual-3.16 / filemap_fdatawait_range(9): Wait for writeback to complete
linux-manual-3.16 / filemap_flush(9): Mostly a non-blocking flush
linux-manual-3.16 / filemap_write_and_wait_range(9): Write out & wait on a file range
linux-manual-3.16 / find_busiest_group(9): Returns the busiest group within the sched_domain if there is an imbalance. if there isnt an imbalance, and the user has opted for power-savings, it returns a group whose cpus can be put to idle by rebalancing those tasks elsewhere, if such a group exists.
linux-manual-3.16 / find_get_entry(9): Find and get a page cache entry
linux-manual-3.16 / find_get_pages_contig(9): Gang contiguous pagecache lookup
linux-manual-3.16 / find_get_pages_tag(9): Find and return pages that match tag
linux-manual-3.16 / find_lock_entry(9): Locate, pin and lock a page cache entry
linux-manual-3.16 / find_min_pfn_with_active_regions(9): Find the minimum pfn registered
linux-manual-3.16 / find_next_best_node(9): Find the next node that should appear in a given nodes fallback list
linux-manual-3.16 / finish_wait(9): Clean up after waiting in a queue
linux-manual-3.16 / fix_small_imbalance(9): Calculate the minor imbalance that exists amongst the groups of a sched_domain, during load balancing.
linux-manual-3.16 / fixup_owner(9): Post lock pi_state and corner case management
linux-manual-3.16 / flock_lock_file_wait(9): Apply a flock-style lock to a file
linux-manual-3.16 / fls(9): Find last set bit in word
linux-manual-3.16 / fls64(9): Find last set bit in a 64-bit word
linux-manual-3.16 / flush_delayed_work(9): Wait for a dwork to finish executing the last queueing
linux-manual-3.16 / flush_kthread_work(9): Flush a kthread_work
linux-manual-3.16 / flush_kthread_worker(9): Flush all current works on a kthread_worker
linux-manual-3.16 / flush_scheduled_work(9): Ensure that any scheduled work has run to completion.
linux-manual-3.16 / flush_work(9): Wait for a work to finish executing the last queueing instance
linux-manual-3.16 / flush_workqueue(9): Ensure that any scheduled work has run to completion.
linux-manual-3.16 / follow_pfn(9): Look up pfn at a user virtual address
linux-manual-3.16 / for_each_dtlb_entry(9): Iterate over free (non-wired) dtlb entries
linux-manual-3.16 / for_each_itlb_entry(9): Iterate over free (non-wired) itlb entries
linux-manual-3.16 / free_area_init_nodes(9): Initialise all pg_data_t and zone data
linux-manual-3.16 / free_bootmem_with_active_regions(9): Call memblock_free_early_nid for each active range
linux-manual-3.16 / free_dma(9): Free a reserved system dma channel
linux-manual-3.16 / free_irq(9): Free an interrupt allocated with request_irq
linux-manual-3.16 / free_netdev(9): Free network device
linux-manual-3.16 / free_rs(9): Free the rs control structure, if it is no longer used
linux-manual-3.16 / freeze_bdev(9): - lock a filesystem and force it into a consistent state
linux-manual-3.16 / freeze_super(9): Lock the filesystem and force it into a consistent state
linux-manual-3.16 / freq_reg_info(9): Get regulatory information for the given frequency
linux-manual-3.16 / fsl_local_config_read(9): Generate a mpc85xx local config space read
linux-manual-3.16 / fsl_local_config_write(9): Generate a mpc85xx local config space write
linux-manual-3.16 / fsl_rio_config_read(9): Generate a mpc85xx read maintenance transaction
linux-manual-3.16 / fsl_rio_config_write(9): Generate a mpc85xx write maintenance transaction
linux-manual-3.16 / fsl_rio_setup(9): Setup freescale powerpc rapidio interface
linux-manual-3.16 / fusion_exit(9): Perform driver unload cleanup.
linux-manual-3.16 / fusion_init(9): Fusion mpt base driver initialization routine.
linux-manual-3.16 / futex_lock_pi_atomic(9): Atomic work required to acquire a pi aware futex
linux-manual-3.16 / futex_proxy_trylock_atomic(9): Attempt an atomic lock for the top waiter
linux-manual-3.16 / futex_requeue(9): Requeue waiters from uaddr1 to uaddr2
linux-manual-3.16 / futex_top_waiter(9): Return the highest priority waiter on a futex
linux-manual-3.16 / futex_wait_queue_me(9): Queue_me and wait for wakeup, timeout, or signal
linux-manual-3.16 / futex_wait_requeue_pi(9): Wait on uaddr and take uaddr2
linux-manual-3.16 / futex_wait_setup(9): Prepare to wait on a futex
linux-manual-3.16 / gadget_is_dualspeed(9): Return true iff the hardware handles high speed
linux-manual-3.16 / gadget_is_otg(9): Return true iff the hardware is otg-ready
linux-manual-3.16 / gadget_is_superspeed(9): Return true if the hardware handles superspeed
linux-manual-3.16 / gdb_regs_to_pt_regs(9): Convert gdb regs to ptrace regs.
linux-manual-3.16 / gen_estimator_active(9): Test if estimator is currently in use
linux-manual-3.16 / gen_kill_estimator(9): Remove a rate estimator
linux-manual-3.16 / gen_new_estimator(9): Create a new rate estimator
linux-manual-3.16 / gen_replace_estimator(9): Replace rate estimator configuration
linux-manual-3.16 / generic_file_read_iter(9): Generic filesystem read routine
linux-manual-3.16 / generic_file_splice_read(9): Splice data from file to a pipe
linux-manual-3.16 / generic_file_write_iter(9): Write data to a file
linux-manual-3.16 / generic_make_request(9): Hand a buffer to its device driver for i/o
linux-manual-3.16 / generic_permission(9): Check for access rights on a posix-like filesystem
linux-manual-3.16 / generic_pipe_buf_confirm(9): Verify contents of the pipe buffer
linux-manual-3.16 / generic_pipe_buf_get(9): Get a reference to a struct pipe_buffer
linux-manual-3.16 / generic_pipe_buf_release(9): Put a reference to a struct pipe_buffer
linux-manual-3.16 / generic_pipe_buf_steal(9): Attempt to take ownership of a pipe_buffer
linux-manual-3.16 / generic_setlease(9): Sets a lease on an open file
linux-manual-3.16 / generic_shutdown_super(9): Common helper for -kill_sb
linux-manual-3.16 / generic_splice_sendpage(9): Splice data from a pipe to a socket
linux-manual-3.16 / generic_writepages(9): Walk the list of dirty pages of the given address space and writepage all of them.
linux-manual-3.16 / genphy_aneg_done(9): Return auto-negotiation status
linux-manual-3.16 / genphy_config_advert(9): Sanitize and advertise auto-negotiation parameters
linux-manual-3.16 / genphy_config_aneg(9): Restart auto-negotiation or write bmcr
linux-manual-3.16 / genphy_read_status(9): Check the link status and update current link state
linux-manual-3.16 / genphy_restart_aneg(9): Enable and restart autonegotiation
linux-manual-3.16 / genphy_setup_forced(9): Configures/forces speed/duplex from phydev
linux-manual-3.16 / genphy_soft_reset(9): Software reset the phy via bmcr_reset bit
linux-manual-3.16 / genphy_update_link(9): Update link status in phydev
linux-manual-3.16 / get_ccwdev_by_busid(9): Obtain device from a bus id
linux-manual-3.16 / get_ccwdev_by_dev_id(9): Obtain device from a ccw device id
linux-manual-3.16 / get_device(9): Increment reference count for device.
linux-manual-3.16 / get_futex_key(9): Get parameters which are the keys for a futex
linux-manual-3.16 / get_gendisk(9): Get partitioning information for a given device
linux-manual-3.16 / get_option(9): Parse integer from an option string
linux-manual-3.16 / get_options(9): Parse a string into a list of integers
linux-manual-3.16 / get_pfn_range_for_nid(9): Return the start and end page frames for a node
linux-manual-3.16 / get_pfnblock_flags_mask(9): Return the requested group of flags for the pageblock_nr_pages block of pages
linux-manual-3.16 / get_phy_c45_ids(9): Reads the specified addr for its 802.3-c45 ids.
linux-manual-3.16 / get_phy_device(9): Reads the specified phy device and returns its phy_device struct
linux-manual-3.16 / get_phy_id(9): Reads the specified addr for its id.
linux-manual-3.16 / get_request(9): Get a free request
linux-manual-3.16 / get_sd_load_idx(9): Obtain the load index for a given sched domain.
linux-manual-3.16 / get_state_synchronize_rcu(9): Snapshot current rcu state
linux-manual-3.16 / get_super(9): Get the superblock of a device
linux-manual-3.16 / get_super_thawed(9): Get thawed superblock of a device
linux-manual-3.16 / get_user_pages_fast(9): Pin user pages in memory
linux-manual-3.16 / glob_match(9): Match a text string against a glob-style pattern
linux-manual-3.16 / gnet_stats_copy_app(9): Copy application specific statistics into statistics tlv
linux-manual-3.16 / gnet_stats_copy_basic(9): Copy basic statistics into statistic tlv
linux-manual-3.16 / gnet_stats_copy_queue(9): Copy queue statistics into statistics tlv
linux-manual-3.16 / gnet_stats_copy_rate_est(9): Copy rate estimator statistics into statistics tlv
linux-manual-3.16 / gnet_stats_finish_copy(9): Finish dumping procedure
linux-manual-3.16 / gnet_stats_start_copy(9): Start dumping procedure in compatibility mode
linux-manual-3.16 / gnet_stats_start_copy_compat(9): Start dumping procedure in compatibility mode
linux-manual-3.16 / handle_bad_irq(9): Handle spurious and unhandled irqs
linux-manual-3.16 / handle_early_requeue_pi_wakeup(9): Detect early wakeup on the initial futex
linux-manual-3.16 / handle_edge_eoi_irq(9): Edge eoi type irq handler
linux-manual-3.16 / handle_edge_irq(9): Edge type irq handler
linux-manual-3.16 / handle_fasteoi_irq(9): Irq handler for transparent controllers
linux-manual-3.16 / handle_level_irq(9): Level type irq handler
linux-manual-3.16 / handle_percpu_devid_irq(9): Per cpu local irq handler with per cpu dev ids
linux-manual-3.16 / handle_percpu_irq(9): Per cpu local irq handler
linux-manual-3.16 / handle_simple_irq(9): Simple and software-decoded irqs.
linux-manual-3.16 / have_submounts(9): Check for mounts over a dentry
linux-manual-3.16 / hcd_buffer_create(9): Initialize buffer pools
linux-manual-3.16 / hcd_buffer_destroy(9): Deallocate buffer pools
ax25-tools / hdlcdrv(9): Hdlc amateur (ax.25) packet radio network driver
linux-manual-3.16 / hdmi_audio_infoframe_init(9): Initialize an hdmi audio infoframe
linux-manual-3.16 / hdmi_audio_infoframe_pack(9): Write hdmi audio infoframe to binary buffer
linux-manual-3.16 / hdmi_avi_infoframe_init(9): Initialize an hdmi avi infoframe
linux-manual-3.16 / hdmi_avi_infoframe_pack(9): Write hdmi avi infoframe to binary buffer
linux-manual-3.16 / hdmi_infoframe_pack(9): Write a hdmi infoframe to binary buffer
linux-manual-3.16 / hdmi_spd_infoframe_init(9): Initialize an hdmi spd infoframe
linux-manual-3.16 / hdmi_spd_infoframe_pack(9): Write hdmi spd infoframe to binary buffer
linux-manual-3.16 / hdmi_vendor_infoframe_init(9): Initialize an hdmi vendor infoframe
linux-manual-3.16 / hdmi_vendor_infoframe_pack(9): Write a hdmi vendor infoframe to binary buffer
linux-manual-3.16 / hlist_for_each_entry(9): Iterate over list of given type
linux-manual-3.16 / hlist_for_each_entry_continue(9): Iterate over a hlist continuing after current point
linux-manual-3.16 / hlist_for_each_entry_from(9): Iterate over a hlist continuing from current point
linux-manual-3.16 / hlist_for_each_entry_safe(9): Iterate over list of given type safe against removal of list entry
linux-manual-3.16 / hrtimer_cancel(9): Cancel a timer and wait for the handler to finish.
linux-manual-3.16 / hrtimer_forward(9): Forward the timer expiry
linux-manual-3.16 / hrtimer_get_remaining(9): Get remaining time for the timer
linux-manual-3.16 / hrtimer_get_res(9): Get the timer resolution for a clock
linux-manual-3.16 / hrtimer_init(9): Initialize a timer to the given clock
linux-manual-3.16 / hrtimer_start(9): (re)start an hrtimer on the current cpu
linux-manual-3.16 / hrtimer_start_range_ns(9): (re)start an hrtimer on the current cpu
linux-manual-3.16 / hrtimer_try_to_cancel(9): Try to deactivate a timer
linux-manual-3.16 / hsi_alloc_controller(9): Allocate an hsi controller and its ports
linux-manual-3.16 / hsi_alloc_msg(9): Allocate an hsi message
linux-manual-3.16 / hsi_async(9): Submit an hsi transfer to the controller
linux-manual-3.16 / hsi_async_read(9): Submit a read transfer
linux-manual-3.16 / hsi_async_write(9): Submit a write transfer
linux-manual-3.16 / hsi_claim_port(9): Claim the hsi clients port
linux-manual-3.16 / hsi_event(9): Notifies clients about port events
linux-manual-3.16 / hsi_flush(9): Flush all pending transactions on the clients port
linux-manual-3.16 / hsi_free_msg(9): Free an hsi message
linux-manual-3.16 / hsi_get_channel_id_by_name(9): Acquire channel id by channel name
linux-manual-3.16 / hsi_id(9): Get hsi controller id associated to a client
linux-manual-3.16 / hsi_port_id(9): Gets the port number a client is attached to
linux-manual-3.16 / hsi_port_unregister_clients(9): Unregister an hsi port
linux-manual-3.16 / hsi_put_controller(9): Free an hsi controller
linux-manual-3.16 / hsi_register_client_driver(9): Register an hsi client to the hsi bus
linux-manual-3.16 / hsi_register_controller(9): Register an hsi controller and its ports
linux-manual-3.16 / hsi_register_port_event(9): Register a client to receive port events
linux-manual-3.16 / hsi_release_port(9): Release the hsi clients port
linux-manual-3.16 / hsi_setup(9): Configure the clients port
linux-manual-3.16 / hsi_start_tx(9): Signal the port that the client wants to start a tx
linux-manual-3.16 / hsi_stop_tx(9): Signal the port that the client no longer wants to transmit
linux-manual-3.16 / hsi_unregister_controller(9): Unregister an hsi controller
linux-manual-3.16 / hsi_unregister_port_event(9): Stop receiving port events for a client
linux-manual-3.16 / ht_create_irq(9): Create an irq and attach it to a device.
linux-manual-3.16 / ht_destroy_irq(9): Destroy an irq created with ht_create_irq
linux-manual-3.16 / i2c_add_adapter(9): Declare i2c adapter, use dynamic bus number
linux-manual-3.16 / i2c_add_numbered_adapter(9): Declare i2c adapter, use static bus number
linux-manual-3.16 / i2c_del_adapter(9): Unregister i2c adapter
linux-manual-3.16 / i2c_del_driver(9): Unregister i2c driver
linux-manual-3.16 / i2c_dp_aux_add_bus(9): Register an i2c adapter using the aux ch helper
linux-manual-3.16 / i2c_lock_adapter(9): Get exclusive access to an i2c bus segment
linux-manual-3.16 / i2c_master_recv(9): Issue a single i2c message in master receive mode
linux-manual-3.16 / i2c_master_send(9): Issue a single i2c message in master transmit mode
linux-manual-3.16 / i2c_new_device(9): Instantiate an i2c device
linux-manual-3.16 / i2c_new_dummy(9): Return a new i2c device bound to a dummy driver
linux-manual-3.16 / i2c_register_board_info(9): Statically declare i2c devices
linux-manual-3.16 / i2c_release_client(9): Release a use of the i2c client structure
linux-manual-3.16 / i2c_smbus_read_block_data(9): Smbus block read protocol
linux-manual-3.16 / i2c_smbus_read_byte(9): Smbus receive byte protocol
linux-manual-3.16 / i2c_smbus_read_byte_data(9): Smbus read byte protocol
linux-manual-3.16 / i2c_smbus_read_word_data(9): Smbus read word protocol
linux-manual-3.16 / i2c_smbus_write_block_data(9): Smbus block write protocol
linux-manual-3.16 / i2c_smbus_write_byte(9): Smbus send byte protocol
linux-manual-3.16 / i2c_smbus_write_byte_data(9): Smbus write byte protocol
linux-manual-3.16 / i2c_smbus_write_word_data(9): Smbus write word protocol
linux-manual-3.16 / i2c_smbus_xfer(9): Execute smbus protocol operations
linux-manual-3.16 / i2c_transfer(9): Execute a single or combined i2c message
linux-manual-3.16 / i2c_unlock_adapter(9): Release exclusive access to an i2c bus segment
linux-manual-3.16 / i2c_unregister_device(9): Reverse effect of i2c_new_device
linux-manual-3.16 / i2c_use_client(9): Increments the reference count of the i2c client structure
linux-manual-3.16 / i2c_verify_adapter(9): Return parameter as i2c_adapter or null
linux-manual-3.16 / i2c_verify_client(9): Return parameter as i2c_client, or null
linux-manual-3.16 / i2o_block_check_events(9): Have we seen a media change?
linux-manual-3.16 / i2o_block_delayed_request_fn(9): Delayed request queue function
linux-manual-3.16 / i2o_block_device_alloc(9): Allocate memory for a i2o block device
linux-manual-3.16 / i2o_block_device_flush(9): Flush all dirty data of i2o device dev
linux-manual-3.16 / i2o_block_device_free(9): Free the memory of the i2o block device
linux-manual-3.16 / i2o_block_device_lock(9): Locks the media of device dev
linux-manual-3.16 / i2o_block_device_mount(9): Mount (load) the media of device dev
linux-manual-3.16 / i2o_block_device_power(9): Power management for device dev
linux-manual-3.16 / i2o_block_device_unlock(9): Unlocks the media of device dev
linux-manual-3.16 / i2o_block_end_request(9): Post-processing of completed commands
linux-manual-3.16 / i2o_block_exit(9): Block osm exit function
linux-manual-3.16 / i2o_block_init(9): Block osm initialization function
linux-manual-3.16 / i2o_block_ioctl(9): Issue device specific ioctl calls.
linux-manual-3.16 / i2o_block_open(9): Open the block device
linux-manual-3.16 / i2o_block_prep_req_fn(9): Allocates i2o block device specific struct
linux-manual-3.16 / i2o_block_probe(9): Verify if dev is a i2o block device and install it
linux-manual-3.16 / i2o_block_release(9): Release the i2o block device
linux-manual-3.16 / i2o_block_remove(9): Remove the i2o block device from the system again
linux-manual-3.16 / i2o_block_reply(9): Block osm reply handler.
linux-manual-3.16 / i2o_block_request_alloc(9): Allocate an i2o block request struct
linux-manual-3.16 / i2o_block_request_fn(9): Request queue handling function
linux-manual-3.16 / i2o_block_request_free(9): Frees a i2o block request
linux-manual-3.16 / i2o_block_sglist_alloc(9): Allocate the sg list and map it
linux-manual-3.16 / i2o_block_sglist_free(9): Frees the sg list
linux-manual-3.16 / i2o_block_transfer(9): Transfer a request to/from the i2o controller
linux-manual-3.16 / i2o_bus_exit(9): Bus adapter osm exit function
linux-manual-3.16 / i2o_bus_init(9): Bus adapter osm initialization function
linux-manual-3.16 / i2o_bus_match(9): Tell if i2o device class id matches the class ids of the i2o driver (osm)
linux-manual-3.16 / i2o_bus_probe(9): Verify if dev is a i2o bus adapter device and install it
linux-manual-3.16 / i2o_bus_remove(9): Remove the i2o bus adapter device from the system again
linux-manual-3.16 / i2o_bus_scan(9): Scan the bus for new devices
linux-manual-3.16 / i2o_bus_store_scan(9): Scan the i2o bus adapter
linux-manual-3.16 / i2o_cntxt_list_add(9): Append a pointer to context list and return a id
linux-manual-3.16 / i2o_cntxt_list_get(9): Get a pointer from the context list and remove it
linux-manual-3.16 / i2o_cntxt_list_get_ptr(9): Get a context id from the context list
linux-manual-3.16 / i2o_cntxt_list_remove(9): Remove a pointer from the context list
linux-manual-3.16 / i2o_config_exit(9): Configuration osm exit function
linux-manual-3.16 / i2o_config_init(9): Configuration osm initialization function
linux-manual-3.16 / i2o_device_add(9): Allocate a new i2o device and add it to the iop
linux-manual-3.16 / i2o_device_alloc(9): Allocate a i2o device and initialize it
linux-manual-3.16 / i2o_device_claim(9): Claim a device for use by an osm
linux-manual-3.16 / i2o_device_claim_release(9): Release a device that the osm is using
linux-manual-3.16 / i2o_device_issue_claim(9): Claim or release a device
linux-manual-3.16 / i2o_device_parse_lct(9): Parse a previously fetched lct and create devices
linux-manual-3.16 / i2o_device_release(9): Release the memory for a i2o device
linux-manual-3.16 / i2o_device_remove(9): Remove an i2o device from the i2o core
linux-manual-3.16 / i2o_driver_dispatch(9): Dispatch an i2o reply message
linux-manual-3.16 / i2o_driver_exit(9): Clean up i2o drivers (osms)
linux-manual-3.16 / i2o_driver_init(9): Initialize i2o drivers (osms)
linux-manual-3.16 / i2o_driver_notify_controller_add(9): Send notification of added controller
linux-manual-3.16 / i2o_driver_notify_controller_remove(9): Send notification of removed controller
linux-manual-3.16 / i2o_driver_notify_device_add(9): Send notification of added device
linux-manual-3.16 / i2o_driver_notify_device_remove(9): Send notification of removed device
linux-manual-3.16 / i2o_event_register(9): Turn on/off event notification for a i2o device
linux-manual-3.16 / i2o_exec_event(9): Event handling function
linux-manual-3.16 / i2o_exec_exit(9): Removes the exec osm
linux-manual-3.16 / i2o_exec_init(9): Registers the exec osm
linux-manual-3.16 / i2o_exec_lct_get(9): Get the iops logical configuration table
linux-manual-3.16 / i2o_exec_lct_modified(9): Called on lct notify reply
linux-manual-3.16 / i2o_exec_lct_notify(9): Send a asynchronus lct notify request
linux-manual-3.16 / i2o_exec_probe(9): Called if a new i2o device (executive class) appears
linux-manual-3.16 / i2o_exec_remove(9): Called on i2o device removal
linux-manual-3.16 / i2o_exec_reply(9): I2o executive reply handler
linux-manual-3.16 / i2o_exec_show_product_id(9): Displays product id of controller
linux-manual-3.16 / i2o_exec_show_vendor_id(9): Displays vendor id of controller
linux-manual-3.16 / i2o_exec_wait_alloc(9): Allocate a i2o_exec_wait struct an initialize it
linux-manual-3.16 / i2o_exec_wait_free(9): Free an i2o_exec_wait struct
linux-manual-3.16 / i2o_find_iop(9): Find an i2o controller by id
linux-manual-3.16 / i2o_flush_reply(9): Flush reply from i2o controller
linux-manual-3.16 / i2o_get_class_name(9): Do i2o class name lookup
linux-manual-3.16 / i2o_iop_activate(9): Bring controller up to hold
linux-manual-3.16 / i2o_iop_add(9): Initialize the i2o controller and add him to the i2o core
linux-manual-3.16 / i2o_iop_alloc(9): Allocate and initialize a i2o_controller struct
linux-manual-3.16 / i2o_iop_clear(9): Bring i2o controller into hold state
linux-manual-3.16 / i2o_iop_enable(9): Move controller from ready to operational
linux-manual-3.16 / i2o_iop_enable_all(9): Enables all controllers on the system
linux-manual-3.16 / i2o_iop_exit(9): I2o main exit function
linux-manual-3.16 / i2o_iop_find_device(9): Find a i2o device on an i2o controller
linux-manual-3.16 / i2o_iop_free(9): Free the i2o_controller struct
linux-manual-3.16 / i2o_iop_init(9): I2o main initialization function
linux-manual-3.16 / i2o_iop_init_outbound_queue(9): Setup the outbound message queue
linux-manual-3.16 / i2o_iop_online(9): Bring a controller online into operational state.
linux-manual-3.16 / i2o_iop_quiesce(9): Quiesce controller
linux-manual-3.16 / i2o_iop_quiesce_all(9): Quiesce all i2o controllers on the system
linux-manual-3.16 / i2o_iop_release(9): Release the memory for a i2o controller
linux-manual-3.16 / i2o_iop_remove(9): Remove the i2o controller from the i2o core
linux-manual-3.16 / i2o_iop_reset(9): Reset an i2o controller
linux-manual-3.16 / i2o_iop_systab_set(9): Set the i2o system table of the specified iop
linux-manual-3.16 / i2o_msg_get(9): Obtain an i2o message from the iop
linux-manual-3.16 / i2o_msg_get_wait(9): Obtain an i2o message from the iop
linux-manual-3.16 / i2o_msg_in_to_virt(9): Turn an i2o message to a virtual address
linux-manual-3.16 / i2o_msg_nop(9): Returns a message which is not used
linux-manual-3.16 / i2o_msg_nop_mfa(9): Returns a fetched mfa back to the controller
linux-manual-3.16 / i2o_msg_out_to_virt(9): Turn an i2o message to a virtual address
linux-manual-3.16 / i2o_msg_post(9): Post i2o message to i2o controller
linux-manual-3.16 / i2o_msg_post_wait(9): Post and wait a message and wait until return
linux-manual-3.16 / i2o_msg_post_wait_complete(9): Reply to a i2o_msg_post request from iop
linux-manual-3.16 / i2o_msg_post_wait_mem(9): Post and wait a message with dma buffers
linux-manual-3.16 / i2o_parse_hrt(9): Parse the hardware resource table.
linux-manual-3.16 / i2o_pci_alloc(9): Allocate dma memory, map io memory for i2o controller
linux-manual-3.16 / i2o_pci_exit(9): Unregisters i2o pci driver from pci subsystem
linux-manual-3.16 / i2o_pci_free(9): Frees the dma memory for the i2o controller
linux-manual-3.16 / i2o_pci_init(9): Registers i2o pci driver in pci subsystem
linux-manual-3.16 / i2o_pci_interrupt(9): Interrupt handler for i2o controller
linux-manual-3.16 / i2o_pci_irq_disable(9): Free interrupt for i2o controller
linux-manual-3.16 / i2o_pci_irq_enable(9): Allocate interrupt for i2o controller
linux-manual-3.16 / i2o_pci_probe(9): Probe the pci device for an i2o controller
linux-manual-3.16 / i2o_pci_remove(9): Removes a i2o controller from the system
linux-manual-3.16 / i2o_proc_create_entries(9): Creates proc dir entries
linux-manual-3.16 / i2o_proc_device_add(9): Add an i2o device to the proc dir
linux-manual-3.16 / i2o_proc_exit(9): Exit function for procfs
linux-manual-3.16 / i2o_proc_fs_create(9): Create the i2o proc fs.
linux-manual-3.16 / i2o_proc_fs_destroy(9): Cleanup the all i2o proc entries
linux-manual-3.16 / i2o_proc_init(9): Init function for procfs
linux-manual-3.16 / i2o_proc_iop_add(9): Add an i2o controller to the i2o proc tree
linux-manual-3.16 / i2o_scsi_abort(9): Abort a running command
linux-manual-3.16 / i2o_scsi_bios_param(9): Invent disk geometry
linux-manual-3.16 / i2o_scsi_exit(9): Scsi osm exit function
linux-manual-3.16 / i2o_scsi_get_host(9): Get an i2o scsi host
linux-manual-3.16 / i2o_scsi_init(9): Scsi osm initialization function
linux-manual-3.16 / i2o_scsi_notify_controller_add(9): Retrieve notifications of added controllers
linux-manual-3.16 / i2o_scsi_notify_controller_remove(9): Retrieve notifications of removed controllers
linux-manual-3.16 / i2o_scsi_notify_device_add(9): Retrieve notifications of added devices
linux-manual-3.16 / i2o_scsi_notify_device_remove(9): Retrieve notifications of removed devices
linux-manual-3.16 / i2o_scsi_probe(9): Verify if dev is a i2o scsi device and install it
linux-manual-3.16 / i2o_scsi_queuecommand_lck(9): Queue a scsi command
linux-manual-3.16 / i2o_scsi_remove(9): Remove i2o device from scsi core
linux-manual-3.16 / i2o_scsi_reply(9): Scsi osm message reply handler
linux-manual-3.16 / i2o_status_get(9): Get the status block from the i2o controller
linux-manual-3.16 / i2o_systab_build(9): Build system table
linux-manual-3.16 / i915_cmd_parser_fini_ring(9): Clean up cmd parser related fields
linux-manual-3.16 / i915_cmd_parser_get_version(9): Get the cmd parser version number
linux-manual-3.16 / i915_cmd_parser_init_ring(9): Set cmd parser related fields for a ringbuffer
linux-manual-3.16 / i915_needs_cmd_parser(9): Should a given ring use software command parsing?
linux-manual-3.16 / i915_parse_cmds(9): Parse a submitted batch buffer for privilege violations
linux-manual-3.16 / ich_pata_cable_detect(9): Probe host controller cable detect info
linux-manual-3.16 / ich_set_dmamode(9): Initialize host controller pata dma timings
linux-manual-3.16 / ida_destroy(9): Release all cached layers within an ida tree
linux-manual-3.16 / ida_get_new_above(9): Allocate new id above or equal to a start id
linux-manual-3.16 / ida_init(9): Initialize ida handle
linux-manual-3.16 / ida_pre_get(9): Reserve resources for ida allocation
linux-manual-3.16 / ida_remove(9): Remove the given id
linux-manual-3.16 / ida_simple_get(9): Get a new id.
linux-manual-3.16 / ida_simple_remove(9): Remove an allocated id.
linux-manual-3.16 / idr_alloc(9): Allocate new idr entry
linux-manual-3.16 / idr_alloc_cyclic(9): Allocate new idr entry in a cyclical fashion
linux-manual-3.16 / idr_destroy(9): Release all cached layers within an idr tree
linux-manual-3.16 / idr_for_each(9): Iterate through all stored pointers
linux-manual-3.16 / idr_get_next(9): Lookup next object of id to given id.
linux-manual-3.16 / idr_init(9): Initialize idr handle
linux-manual-3.16 / idr_preload(9): Preload for idr_alloc
linux-manual-3.16 / idr_remove(9): Remove the given id and free its slot
linux-manual-3.16 / idr_replace(9): Replace pointer for given id
linux-manual-3.16 / ieee80211_alloc_hw(9): Allocate a new hardware device
linux-manual-3.16 / ieee80211_amsdu_to_8023s(9): Decode an ieee 802.11n a-msdu frame
linux-manual-3.16 / ieee80211_beacon_get(9): Beacon generation function
linux-manual-3.16 / ieee80211_beacon_loss(9): Inform hardware does not receive beacons
linux-manual-3.16 / ieee80211_bss_get_ie(9): Find ie with given id
linux-manual-3.16 / ieee80211_channel_to_frequency(9): Convert channel number to frequency
linux-manual-3.16 / ieee80211_create_tpt_led_trigger(9): Create throughput led trigger
linux-manual-3.16 / ieee80211_ctstoself_duration(9): Get the duration field for a cts-to-self frame
linux-manual-3.16 / ieee80211_ctstoself_get(9): Cts-to-self frame generation function
linux-manual-3.16 / ieee80211_data_from_8023(9): Convert an 802.3 frame to 802.11
linux-manual-3.16 / ieee80211_data_to_8023(9): Convert an 802.11 data frame to 802.3
linux-manual-3.16 / ieee80211_find_sta(9): Find a station
linux-manual-3.16 / ieee80211_find_sta_by_ifaddr(9): Find a station on hardware
linux-manual-3.16 / ieee80211_free_hw(9): Free hardware descriptor
linux-manual-3.16 / ieee80211_frequency_to_channel(9): Convert frequency to channel number
linux-manual-3.16 / ieee80211_generic_frame_duration(9): Calculate the duration field for a frame
linux-manual-3.16 / ieee80211_get_assoc_led_name(9): Get name of association led
linux-manual-3.16 / ieee80211_get_buffered_bc(9): Accessing buffered broadcast and multicast frames
linux-manual-3.16 / ieee80211_get_channel(9): Get channel struct from wiphy for specified frequency
linux-manual-3.16 / ieee80211_get_hdrlen_from_skb(9): Get header length from data
linux-manual-3.16 / ieee80211_get_radio_led_name(9): Get name of radio led
linux-manual-3.16 / ieee80211_get_response_rate(9): Get basic rate for a given rate
linux-manual-3.16 / ieee80211_get_rx_led_name(9): Get name of rx led
linux-manual-3.16 / ieee80211_get_tkip_p1k(9): Get a tkip phase 1 key
linux-manual-3.16 / ieee80211_get_tkip_p1k_iv(9): Get a tkip phase 1 key for iv32
linux-manual-3.16 / ieee80211_get_tkip_p2k(9): Get a tkip phase 2 key
linux-manual-3.16 / ieee80211_get_tx_led_name(9): Get name of tx led
linux-manual-3.16 / ieee80211_hdrlen(9): Get header length in bytes from frame control
linux-manual-3.16 / ieee80211_iterate_active_interfaces(9): Iterate active interfaces
linux-manual-3.16 / ieee80211_iterate_active_interfaces_atomic(9): Iterate active interfaces
linux-manual-3.16 / ieee80211_queue_delayed_work(9): Add work onto the mac80211 workqueue
linux-manual-3.16 / ieee80211_queue_stopped(9): Test status of the queue
linux-manual-3.16 / ieee80211_queue_work(9): Add work onto the mac80211 workqueue
linux-manual-3.16 / ieee80211_register_hw(9): Register hardware device
linux-manual-3.16 / ieee80211_request_smps(9): Request sm ps transition
linux-manual-3.16 / ieee80211_rts_duration(9): Get the duration field for an rts frame
linux-manual-3.16 / ieee80211_rts_get(9): Rts frame generation function
linux-manual-3.16 / ieee80211_rx(9): Receive frame
linux-manual-3.16 / ieee80211_rx_irqsafe(9): Receive frame
linux-manual-3.16 / ieee80211_rx_ni(9): Receive frame (in process context)
linux-manual-3.16 / ieee80211_scan_completed(9): Completed hardware scan
linux-manual-3.16 / ieee80211_sta_block_awake(9): Block station from waking up
linux-manual-3.16 / ieee80211_sta_eosp(9): Notify mac80211 about end of sp
linux-manual-3.16 / ieee80211_sta_ps_transition(9): Ps transition for connected sta
linux-manual-3.16 / ieee80211_sta_ps_transition_ni(9): Ps transition for connected sta (in process context)
linux-manual-3.16 / ieee80211_sta_set_buffered(9): Inform mac80211 about driver-buffered frames
linux-manual-3.16 / ieee80211_start_tx_ba_cb_irqsafe(9): Low level driver ready to aggregate.
linux-manual-3.16 / ieee80211_start_tx_ba_session(9): Start a tx block ack session.
linux-manual-3.16 / ieee80211_stop_queue(9): Stop specific queue
linux-manual-3.16 / ieee80211_stop_queues(9): Stop all queues
linux-manual-3.16 / ieee80211_stop_tx_ba_cb_irqsafe(9): Low level driver ready to stop aggregate.
linux-manual-3.16 / ieee80211_stop_tx_ba_session(9): Stop a block ack session.
linux-manual-3.16 / ieee80211_tx_info_clear_status(9): Clear tx status
linux-manual-3.16 / ieee80211_tx_status(9): Transmit status callback
linux-manual-3.16 / ieee80211_tx_status_irqsafe(9): Irq-safe transmit status callback
linux-manual-3.16 / ieee80211_tx_status_ni(9): Transmit status callback (in process context)
linux-manual-3.16 / ieee80211_unregister_hw(9): Unregister a hardware device
linux-manual-3.16 / ieee80211_wake_queue(9): Wake specific queue
linux-manual-3.16 / ieee80211_wake_queues(9): Wake all queues
linux-manual-3.16 / iget5_locked(9): Obtain an inode from a mounted file system
linux-manual-3.16 / iget_failed(9): Mark an under-construction inode as dead and release it
linux-manual-3.16 / iget_locked(9): Obtain an inode from a mounted file system
linux-manual-3.16 / ilookup(9): Search for an inode in the inode cache
linux-manual-3.16 / ilookup5(9): Search for an inode in the inode cache
linux-manual-3.16 / ilookup5_nowait(9): Search for an inode in the inode cache
linux-manual-3.16 / ilsel_disable(9): Disable an ilsel set
linux-manual-3.16 / ilsel_enable(9): Enable an ilsel set.
linux-manual-3.16 / ilsel_enable_fixed(9): Enable an ilsel set at a fixed interrupt level
linux-manual-3.16 / inc_nlink(9): Directly increment an inodes link count
linux-manual-3.16 / initChainBuffers(9): Allocate memory for and initialize chain buffers
linux-manual-3.16 / init_completion(9): Initialize a dynamically allocated completion
linux-manual-3.16 / init_dummy_netdev(9): Init a dummy network device for napi
linux-manual-3.16 / init_rcu_head_on_stack(9): Initialize on-stack rcu_head for debugobjects
linux-manual-3.16 / init_rs(9): Find a matching or allocate a new rs control structure
linux-manual-3.16 / init_rs_non_canonical(9): Find a matching or allocate a new rs control structure, for fields with non-canonical representation
linux-manual-3.16 / init_srcu_struct(9): Initialize a sleep-rcu structure
linux-manual-3.16 / init_timer_key(9): Initialize a timer
linux-manual-3.16 / inode_dio_wait(9): Wait for outstanding dio requests to finish
linux-manual-3.16 / inode_inc_iversion(9): Increments i_version
linux-manual-3.16 / inode_init_always(9): Perform inode structure intialisation
linux-manual-3.16 / inode_init_owner(9): Init uid,gid,mode for new inode according to posix standards
linux-manual-3.16 / inode_owner_or_capable(9): Check current task permissions to inode
linux-manual-3.16 / inode_permission(9): Check for access rights to a given inode
linux-manual-3.16 / inode_sb_list_add(9): Add inode to the superblock list of inodes
linux-manual-3.16 / input_alloc_absinfo(9): Allocates array of input_absinfo structs
linux-manual-3.16 / input_allocate_device(9): Allocate memory for new input device
linux-manual-3.16 / input_allocate_polled_device(9): Allocate memory for polled device
linux-manual-3.16 / input_close_device(9): Close input device
linux-manual-3.16 / input_event(9): Report new input event
linux-manual-3.16 / input_ff_create(9): Create force-feedback device
linux-manual-3.16 / input_ff_create_memless(9): Create memoryless force-feedback device
linux-manual-3.16 / input_ff_destroy(9): Frees force feedback portion of input device
linux-manual-3.16 / input_ff_erase(9): Erase a force-feedback effect from device
linux-manual-3.16 / input_ff_event(9): Generic handler for force-feedback events
linux-manual-3.16 / input_ff_upload(9): Upload effect into force-feedback device
linux-manual-3.16 / input_free_device(9): Free memory occupied by input_dev structure
linux-manual-3.16 / input_free_minor(9): Release previously allocated minor
linux-manual-3.16 / input_free_polled_device(9): Free memory allocated for polled device
linux-manual-3.16 / input_get_keycode(9): Retrieve keycode currently mapped to a given scancode
linux-manual-3.16 / input_get_new_minor(9): Allocates a new input minor number
linux-manual-3.16 / input_grab_device(9): Grabs device for exclusive use
linux-manual-3.16 / input_handler_for_each_handle(9): Handle iterator
linux-manual-3.16 / input_inject_event(9): Send input event from input handler
linux-manual-3.16 / input_mt_assign_slots(9): Perform a best-match assignment
linux-manual-3.16 / input_mt_destroy_slots(9): Frees the mt slots of the input device
linux-manual-3.16 / input_mt_get_slot_by_key(9): Return slot matching key
linux-manual-3.16 / input_mt_init_slots(9): Initialize mt input slots
linux-manual-3.16 / input_mt_report_finger_count(9): Report contact count
linux-manual-3.16 / input_mt_report_pointer_emulation(9): Common pointer emulation
linux-manual-3.16 / input_mt_report_slot_state(9): Report contact state
linux-manual-3.16 / input_mt_sync_frame(9): Synchronize mt frame
linux-manual-3.16 / input_open_device(9): Open input device
linux-manual-3.16 / input_register_device(9): Register device with input core
linux-manual-3.16 / input_register_handle(9): Register a new input handle
linux-manual-3.16 / input_register_handler(9): Register a new input handler
linux-manual-3.16 / input_register_polled_device(9): Register polled device
linux-manual-3.16 / input_release_device(9): Release previously grabbed device
linux-manual-3.16 / input_reset_device(9): Reset/restore the state of input device
linux-manual-3.16 / input_scancode_to_scalar(9): Converts scancode in struct input_keymap_entry
linux-manual-3.16 / input_set_capability(9): Mark device as capable of a certain event
linux-manual-3.16 / input_set_events_per_packet(9): Tell handlers about the driver event rate
linux-manual-3.16 / input_set_keycode(9): Attribute a keycode to a given scancode
linux-manual-3.16 / input_unregister_device(9): Unregister previously registered device
linux-manual-3.16 / input_unregister_handle(9): Unregister an input handle
linux-manual-3.16 / input_unregister_handler(9): Unregisters an input handler
linux-manual-3.16 / input_unregister_polled_device(9): Unregister polled device
linux-manual-3.16 / insert_resource(9): Inserts a resource in the resource tree
linux-manual-3.16 / insert_resource_conflict(9): Inserts resource in the resource tree
linux-manual-3.16 / insert_resource_expand_to_fit(9): Insert a resource into the resource tree
linux-manual-3.16 / invalidate_inode_pages2(9): Remove all pages from an address_space
linux-manual-3.16 / invalidate_inode_pages2_range(9): Remove range of pages from an address_space
linux-manual-3.16 / invalidate_mapping_pages(9): Invalidate all the unlocked pages of one inode
linux-manual-3.16 / ioremap_nocache(9): Map bus memory into cpu space
linux-manual-3.16 / ipc64_perm_to_ipc_perm(9): Convert new ipc permissions to old
linux-manual-3.16 / ipc_addid(9): Add an ipc identifier
linux-manual-3.16 / ipc_alloc(9): Allocate ipc space
linux-manual-3.16 / ipc_check_perms(9): Check security and permissions for an ipc object
linux-manual-3.16 / ipc_findkey(9): Find a key in an ipc identifier set
linux-manual-3.16 / ipc_free(9): Free ipc space
linux-manual-3.16 / ipc_get_maxid(9): Get the last assigned id
linux-manual-3.16 / ipc_init(9): Initialise ipc subsystem
linux-manual-3.16 / ipc_init_ids(9): Initialise ipc identifiers
linux-manual-3.16 / ipc_init_proc_interface(9): Create a proc interface for sysipc types using a seq_file interface.
linux-manual-3.16 / ipc_lock(9): Lock an ipc structure without rwsem held
linux-manual-3.16 / ipc_obtain_object(9): Ipc_obtain_object -
linux-manual-3.16 / ipc_obtain_object_check(9): Ipc_obtain_object_check -
linux-manual-3.16 / ipc_parse_version(9): Ipc call version
linux-manual-3.16 / ipc_rcu_alloc(9): Allocate ipc and rcu space
linux-manual-3.16 / ipc_rmid(9): Remove an ipc identifier
linux-manual-3.16 / ipc_update_perm(9): Update the permissions of an ipc object
linux-manual-3.16 / ipcctl_pre_down_nolock(9): Retrieve an ipc and check permissions for some ipc_xxx cmd
linux-manual-3.16 / ipcget(9): Common sys_*get code
linux-manual-3.16 / ipcget_new(9): Create a new ipc object
linux-manual-3.16 / ipcget_public(9): Get an ipc object or create a new one
linux-manual-3.16 / ipcperms(9): Check ipc permissions
linux-manual-3.16 / iput(9): Put an inode
linux-manual-3.16 / irq_alloc_domain_generic_chips(9): Allocate generic chips for an irq domain
linux-manual-3.16 / irq_alloc_generic_chip(9): Allocate a generic chip and initialize it
linux-manual-3.16 / irq_cpu_offline(9): Invoke all irq_cpu_offline functions.
linux-manual-3.16 / irq_cpu_online(9): Invoke all irq_cpu_online functions.
linux-manual-3.16 / irq_disable(9): Mark interrupt disabled
linux-manual-3.16 / irq_force_affinity(9): Force the irq affinity of a given irq
linux-manual-3.16 / irq_gc_ack_set_bit(9): Ack pending interrupt via setting bit
linux-manual-3.16 / irq_gc_mask_clr_bit(9): Mask chip via clearing bit in mask register
linux-manual-3.16 / irq_gc_mask_set_bit(9): Mask chip via setting bit in mask register
linux-manual-3.16 / irq_get_domain_generic_chip(9): Get a pointer to the generic chip of a hw_irq
linux-manual-3.16 / irq_get_next_irq(9): Get next allocated irq number
linux-manual-3.16 / irq_remove_generic_chip(9): Remove a chip
linux-manual-3.16 / irq_set_affinity(9): Set the irq affinity of a given irq
linux-manual-3.16 / irq_set_affinity_notifier(9): Control notification of irq affinity changes
linux-manual-3.16 / irq_set_chip(9): Set the irq chip for an irq
linux-manual-3.16 / irq_set_chip_data(9): Set irq chip data for an irq
linux-manual-3.16 / irq_set_handler_data(9): Set irq handler data for an irq
linux-manual-3.16 / irq_set_irq_type(9): Set the irq trigger type for an irq
linux-manual-3.16 / irq_set_irq_wake(9): Control irq power management wakeup
linux-manual-3.16 / irq_set_msi_desc(9): Set msi descriptor data for an irq
linux-manual-3.16 / irq_set_msi_desc_off(9): Set msi descriptor data for an irq at offset
linux-manual-3.16 / irq_setup_alt_chip(9): Switch to alternative chip
linux-manual-3.16 / irq_setup_generic_chip(9): Setup a range of interrupts with a generic chip
linux-manual-3.16 / irq_wake_thread(9): Wake the irq thread for the action identified by dev_id
linux-manual-3.16 / is_bad_inode(9): Is an inode errored
linux-manual-3.16 / is_broadcast_ether_addr(9): Determine if the ethernet address is broadcast
linux-manual-3.16 / is_etherdev_addr(9): Tell if given ethernet address belongs to the device.
linux-manual-3.16 / is_global_init(9): Check if a task structure is init
linux-manual-3.16 / is_idle_task(9): Is the specified task an idle task?
linux-manual-3.16 / is_link_local_ether_addr(9): Determine if given ethernet address is link-local
linux-manual-3.16 / is_local_ether_addr(9): Determine if the ethernet address is locally-assigned one (ieee 802).
linux-manual-3.16 / is_multicast_ether_addr(9): Determine if the ethernet address is a multicast.
linux-manual-3.16 / is_unicast_ether_addr(9): Determine if the ethernet address is unicast
linux-manual-3.16 / is_valid_ether_addr(9): Determine if the given ethernet address is valid
linux-manual-3.16 / is_zero_ether_addr(9): Determine if give ethernet address is all zeros.
linux-manual-3.16 / iscsi_block_scsi_eh(9): Block scsi eh until session state has transistioned
linux-manual-3.16 / iscsi_create_conn(9): Create iscsi class connection
linux-manual-3.16 / iscsi_create_flashnode_conn(9): Add flashnode conn entry in sysfs
linux-manual-3.16 / iscsi_create_flashnode_sess(9): Add flashnode session entry in sysfs
linux-manual-3.16 / iscsi_create_session(9): Create iscsi class session
linux-manual-3.16 / iscsi_destroy_all_flashnode(9): Destroy all flashnode session entries
linux-manual-3.16 / iscsi_destroy_conn(9): Destroy iscsi class connection
linux-manual-3.16 / iscsi_destroy_flashnode_sess(9): Destroy flashnode session entry
linux-manual-3.16 / iscsi_destroy_session(9): Destroy iscsi session
linux-manual-3.16 / iscsi_find_flashnode_conn(9): Finds flashnode connection entry
linux-manual-3.16 / iscsi_find_flashnode_sess(9): Finds flashnode session entry
linux-manual-3.16 / iscsi_is_flashnode_conn_dev(9): Verify passed device is to be flashnode conn
linux-manual-3.16 / iscsi_scan_finished(9): Helper to report when running scans are done
linux-manual-3.16 / iscsi_session_event(9): Send session destr. completion event
linux-manual-3.16 / iscsi_unblock_session(9): Set a session as logged in and start io.
linux-manual-3.16 / iter_file_splice_write(9): Splice data from a pipe to a file
linux-manual-3.16 / iterate_supers_type(9): Call function for superblocks of given type
linux-manual-3.16 / iunique(9): Get a unique inode number
linux-manual-3.16 / journal_abort(9): Shutdown the journal immediately.
linux-manual-3.16 / journal_ack_err(9): Ack journal err.
linux-manual-3.16 / journal_check_available_features(9): Check feature set in journalling layer
linux-manual-3.16 / journal_check_used_features(9): Check if features specified are used.
linux-manual-3.16 / journal_clear_err(9): Clears the journals error state
linux-manual-3.16 / journal_create(9): Initialise the new journal file
linux-manual-3.16 / journal_destroy(9): Release a journal_t structure.
linux-manual-3.16 / journal_dirty_data(9): Mark a buffer as containing dirty data to be flushed
linux-manual-3.16 / journal_dirty_metadata(9): Mark a buffer as containing dirty metadata
linux-manual-3.16 / journal_errno(9): Returns the journals error state.
linux-manual-3.16 / journal_extend(9): Extend buffer credits.
linux-manual-3.16 / journal_flush(9): Flush journal
linux-manual-3.16 / journal_force_commit(9): Force any uncommitted transactions
linux-manual-3.16 / journal_forget(9): Bforget for potentially-journaled buffers.
linux-manual-3.16 / journal_get_create_access(9): Notify intent to use newly created bh
linux-manual-3.16 / journal_get_undo_access(9): Notify intent to modify metadata with non-rewindable consequences
linux-manual-3.16 / journal_get_write_access(9): Notify intent to modify a buffer for metadata (not data) update.
linux-manual-3.16 / journal_init_dev(9): Creates and initialises a journal structure
linux-manual-3.16 / journal_init_inode(9): Creates a journal which maps to a inode.
linux-manual-3.16 / journal_invalidatepage(9): Invalidate a journal page
linux-manual-3.16 / journal_load(9): Read journal from disk.
linux-manual-3.16 / journal_lock_updates(9): Establish a transaction barrier.
linux-manual-3.16 / journal_recover(9): Recovers a on-disk journal
linux-manual-3.16 / journal_restart(9): Restart a handle.
linux-manual-3.16 / journal_set_features(9): Mark a given journal feature in the superblock
linux-manual-3.16 / journal_skip_recovery(9): Start journal and wipe exiting records
linux-manual-3.16 / journal_start(9): Obtain a new handle.
linux-manual-3.16 / journal_stop(9): Complete a transaction
linux-manual-3.16 / journal_try_to_free_buffers(9): Try to free page buffers.
linux-manual-3.16 / journal_unlock_updates(9): Release barrier
linux-manual-3.16 / journal_update_format(9): Update on-disk journal structure.
linux-manual-3.16 / journal_wipe(9): Wipe journal contents
linux-manual-3.16 / kcalloc(9): Allocate memory for an array. the memory is set to zero.
linux-manual-3.16 / kernel_recvmsg(9): Receive a message from a socket (kernel space)
linux-manual-3.16 / kernel_to_ipc64_perm(9): Convert kernel ipc permissions to user
linux-manual-3.16 / kfifo_alloc(9): Dynamically allocates a new fifo buffer
linux-manual-3.16 / kfifo_avail(9): Returns the number of unused elements in the fifo
linux-manual-3.16 / kfifo_dma_in_finish(9): Finish a dma in operation
linux-manual-3.16 / kfifo_dma_in_prepare(9): Setup a scatterlist for dma input
linux-manual-3.16 / kfifo_dma_out_finish(9): Finish a dma out operation
linux-manual-3.16 / kfifo_dma_out_prepare(9): Setup a scatterlist for dma output
linux-manual-3.16 / kfifo_esize(9): Returns the size of the element managed by the fifo
linux-manual-3.16 / kfifo_free(9): Frees the fifo
linux-manual-3.16 / kfifo_from_user(9): Puts some data from user space into the fifo
linux-manual-3.16 / kfifo_get(9): Get data from the fifo
linux-manual-3.16 / kfifo_in(9): Put data into the fifo
linux-manual-3.16 / kfifo_in_spinlocked(9): Put data into the fifo using a spinlock for locking
linux-manual-3.16 / kfifo_init(9): Initialize a fifo using a preallocated buffer
linux-manual-3.16 / kfifo_initialized(9): Check if the fifo is initialized
linux-manual-3.16 / kfifo_is_empty(9): Returns true if the fifo is empty
linux-manual-3.16 / kfifo_is_full(9): Returns true if the fifo is full
linux-manual-3.16 / kfifo_len(9): Returns the number of used elements in the fifo
linux-manual-3.16 / kfifo_out(9): Get data from the fifo
linux-manual-3.16 / kfifo_out_peek(9): Gets some data from the fifo
linux-manual-3.16 / kfifo_out_spinlocked(9): Get data from the fifo using a spinlock for locking
linux-manual-3.16 / kfifo_peek(9): Get data from the fifo without removing
linux-manual-3.16 / kfifo_peek_len(9): Gets the size of the next fifo record
linux-manual-3.16 / kfifo_put(9): Put data into the fifo
linux-manual-3.16 / kfifo_recsize(9): Returns the size of the record length field
linux-manual-3.16 / kfifo_reset(9): Removes the entire fifo content
linux-manual-3.16 / kfifo_reset_out(9): Skip fifo content
linux-manual-3.16 / kfifo_size(9): Returns the size of the fifo in elements
linux-manual-3.16 / kfifo_skip(9): Skip output data
linux-manual-3.16 / kfifo_to_user(9): Copies data from the fifo into user space
linux-manual-3.16 / kfree(9): Free previously allocated memory
linux-manual-3.16 / kfree_skb(9): Free an sk_buff
linux-manual-3.16 / kgdb_arch_exit(9): Perform any architecture specific uninitalization.
linux-manual-3.16 / kgdb_arch_handle_exception(9): Handle architecture specific gdb packets.
linux-manual-3.16 / kgdb_arch_init(9): Perform any architecture specific initalization.
linux-manual-3.16 / kgdb_arch_late(9): Perform any architecture specific initalization.
linux-manual-3.16 / kgdb_arch_set_pc(9): Generic call back to the program counter
linux-manual-3.16 / kgdb_breakpoint(9): Compiled in breakpoint
linux-manual-3.16 / kgdb_roundup_cpus(9): Get other cpus into a holding pattern
linux-manual-3.16 / kgdb_skipexception(9): (optional) exit kgdb_handle_exception early
linux-manual-3.16 / kmalloc(9): Allocate memory
linux-manual-3.16 / kmalloc_array(9): Allocate memory for an array.
linux-manual-3.16 / kmem_cache_alloc(9): Allocate an object
linux-manual-3.16 / kmem_cache_alloc_node(9): Allocate an object on the specified node
linux-manual-3.16 / kmem_cache_free(9): Deallocate an object
linux-manual-3.16 / kmemdup(9): Duplicate region of memory
linux-manual-3.16 / kmsg_dump_get_buffer(9): Copy kmsg log lines
linux-manual-3.16 / kmsg_dump_get_line(9): Retrieve one kmsg log line
linux-manual-3.16 / kmsg_dump_register(9): Register a kernel log dumper.
linux-manual-3.16 / kmsg_dump_rewind(9): Reset the interator
linux-manual-3.16 / kmsg_dump_unregister(9): Unregister a kmsg dumper.
linux-manual-3.16 / kobject_add(9): The main kobject add function
linux-manual-3.16 / kobject_create_and_add(9): Create a struct kobject dynamically and register it with sysfs
linux-manual-3.16 / kobject_del(9): Unlink kobject from hierarchy.
linux-manual-3.16 / kobject_get(9): Increment refcount for object.
linux-manual-3.16 / kobject_get_path(9): Generate and return the path associated with a given kobj and kset pair.
linux-manual-3.16 / kobject_init(9): Initialize a kobject structure
linux-manual-3.16 / kobject_init_and_add(9): Initialize a kobject structure and add it to the kobject hierarchy
linux-manual-3.16 / kobject_put(9): Decrement refcount for object.
linux-manual-3.16 / kobject_rename(9): Change the name of an object
linux-manual-3.16 / kobject_set_name(9): Set the name of a kobject
linux-manual-3.16 / krealloc(9): Reallocate memory. the contents will remain unchanged.
linux-manual-3.16 / kset_create_and_add(9): Create a struct kset dynamically and add it to sysfs
linux-manual-3.16 / kset_register(9): Initialize and add a kset.
linux-manual-3.16 / kset_unregister(9): Remove a kset.
linux-manual-3.16 / ksize(9): Get the actual amount of memory allocated for a given object
linux-manual-3.16 / kstat_irqs(9): Get the statistics for an interrupt
linux-manual-3.16 / kstat_irqs_cpu(9): Get the statistics for an interrupt on a cpu
linux-manual-3.16 / kstat_irqs_usr(9): Get the statistics for an interrupt
linux-manual-3.16 / kstrdup(9): Allocate space for and copy an existing string
linux-manual-3.16 / kstrndup(9): Allocate space for and copy an existing string
linux-manual-3.16 / kstrtoint(9): Convert a string to an int
linux-manual-3.16 / kstrtol(9): Convert a string to a long
linux-manual-3.16 / kstrtoll(9): Convert a string to a long long
linux-manual-3.16 / kstrtouint(9): Convert a string to an unsigned int
linux-manual-3.16 / kstrtoul(9): Convert a string to an unsigned long
linux-manual-3.16 / kstrtoull(9): Convert a string to an unsigned long long
linux-manual-3.16 / kthread_bind(9): Bind a just-created kthread to a cpu.
linux-manual-3.16 / kthread_create_on_node(9): Create a kthread.
linux-manual-3.16 / kthread_freezable_should_stop(9): Should this freezable kthread return now?
linux-manual-3.16 / kthread_run(9): Create and wake a thread.
linux-manual-3.16 / kthread_should_stop(9): Should this kthread return now?
linux-manual-3.16 / kthread_stop(9): Stop a thread created by kthread_create.
linux-manual-3.16 / kthread_worker_fn(9): Kthread function to process kthread_worker
linux-manual-3.16 / ktime_add(9): Add two ktime_t variables
linux-manual-3.16 / ktime_add_ns(9): Add a scalar nanoseconds value to a ktime_t variable
linux-manual-3.16 / ktime_after(9): Compare if a ktime_t value is bigger than another one.
linux-manual-3.16 / ktime_before(9): Compare if a ktime_t value is smaller than another one.
linux-manual-3.16 / ktime_compare(9): Compares two ktime_t variables for less, greater or equal
linux-manual-3.16 / ktime_equal(9): Compares two ktime_t variables to see if they are equal
linux-manual-3.16 / ktime_set(9): Set a ktime_t variable from a seconds/nanoseconds value
linux-manual-3.16 / ktime_sub(9): Subtract two ktime_t variables
linux-manual-3.16 / ktime_sub_ns(9): Subtract a scalar nanoseconds value from a ktime_t variable
linux-manual-3.16 / ktime_to_ns(9): Convert a ktime_t variable to scalar nanoseconds
linux-manual-3.16 / ktime_to_timespec(9): Convert a ktime_t variable to timespec format
linux-manual-3.16 / ktime_to_timespec_cond(9): Convert a ktime_t variable to timespec format only if the variable contains data
linux-manual-3.16 / ktime_to_timeval(9): Convert a ktime_t variable to timeval format
linux-manual-3.16 / kzalloc(9): Allocate memory. the memory is set to zero.
linux-manual-3.16 / kzalloc_node(9): Allocate zeroed memory from a particular memory node.
linux-manual-3.16 / kzfree(9): Like kfree but zero memory
linux-manual-3.16 / lan_reply(9): Handle all data sent from the hardware.
linux-manual-3.16 / lease_get_mtime(9): Get the last modified time of an inode
linux-manual-3.16 / list_add(9): Add a new entry
linux-manual-3.16 / list_add_tail(9): Add a new entry
linux-manual-3.16 / list_cut_position(9): Cut a list into two
linux-manual-3.16 / list_del_init(9): Deletes entry from list and reinitialize it.
linux-manual-3.16 / list_empty(9): Tests whether a list is empty
linux-manual-3.16 / list_empty_careful(9): Tests whether a list is empty and not being modified
linux-manual-3.16 / list_entry(9): Get the struct for this entry
linux-manual-3.16 / list_first_entry(9): Get the first element from a list
linux-manual-3.16 / list_first_entry_or_null(9): Get the first element from a list
linux-manual-3.16 / list_for_each(9): Iterate over a list
linux-manual-3.16 / list_for_each_entry(9): Iterate over list of given type
linux-manual-3.16 / list_for_each_entry_continue(9): Continue iteration over list of given type
linux-manual-3.16 / list_for_each_entry_continue_reverse(9): Iterate backwards from the given point
linux-manual-3.16 / list_for_each_entry_from(9): Iterate over list of given type from the current point
linux-manual-3.16 / list_for_each_entry_reverse(9): Iterate backwards over list of given type.
linux-manual-3.16 / list_for_each_entry_safe(9): Iterate over list of given type safe against removal of list entry
linux-manual-3.16 / list_for_each_entry_safe_continue(9): Continue list iteration safe against removal
linux-manual-3.16 / list_for_each_entry_safe_from(9): Iterate over list from current point safe against removal
linux-manual-3.16 / list_for_each_entry_safe_reverse(9): Iterate backwards over list safe against removal
linux-manual-3.16 / list_for_each_prev(9): Iterate over a list backwards
linux-manual-3.16 / list_for_each_prev_safe(9): Iterate over a list backwards safe against removal of list entry
linux-manual-3.16 / list_for_each_safe(9): Iterate over a list safe against removal of list entry
linux-manual-3.16 / list_is_last(9): Tests whether list is the last entry in list head
linux-manual-3.16 / list_is_singular(9): Tests whether a list has just one entry.
linux-manual-3.16 / list_last_entry(9): Get the last element from a list
linux-manual-3.16 / list_move(9): Delete from one list and add as anothers head
linux-manual-3.16 / list_move_tail(9): Delete from one list and add as anothers tail
linux-manual-3.16 / list_next_entry(9): Get the next element in list
linux-manual-3.16 / list_prepare_entry(9): Prepare a pos entry for use in list_for_each_entry_continue
linux-manual-3.16 / list_prev_entry(9): Get the prev element in list
linux-manual-3.16 / list_replace(9): Replace old entry by new one
linux-manual-3.16 / list_rotate_left(9): Rotate the list to the left
linux-manual-3.16 / list_safe_reset_next(9): Reset a stale list_for_each_entry_safe loop
linux-manual-3.16 / list_splice(9): Join two lists, this is designed for stacks
linux-manual-3.16 / list_splice_init(9): Join two lists and reinitialise the emptied list.
linux-manual-3.16 / list_splice_tail(9): Join two lists, each list being a queue
linux-manual-3.16 / list_splice_tail_init(9): Join two lists and reinitialise the emptied list
linux-manual-3.16 / ll_rw_block(9): Level access to block devices (deprecated)
linux-manual-3.16 / lock_may_read(9): Checks that the region is free of locks
linux-manual-3.16 / lock_may_write(9): Checks that the region is free of locks
linux-manual-3.16 / lock_sock_fast(9): Fast version of lock_sock
linux-manual-3.16 / lock_two_nondirectories(9): Take two i_mutexes on non-directory objects
linux-manual-3.16 / locks_mandatory_area(9): Check for a conflicting lock
linux-manual-3.16 / locks_mandatory_locked(9): Check for an active lock
linux-manual-3.16 / locks_unlink_lock(9): Delete a lock and then free it.
linux-manual-3.16 / lookup_bdev(9): Lookup a struct block_device by name
linux-manual-3.16 / lookup_one_len(9): Filesystem helper to lookup single pathname component
linux-manual-3.16 / lookup_resource(9): Find an existing resource by a resource start address
linux-manual-3.16 / lower_32_bits(9): Return bits 0-31 of a number
linux-manual-3.16 / mac_find_mode(9): Find a video mode
linux-manual-3.16 / mac_map_monitor_sense(9): Convert monitor sense to vmode
linux-manual-3.16 / mac_vmode_to_var(9): Converts vmode/cmode pair to var structure
linux-manual-3.16 / make_bad_inode(9): Mark an inode bad due to an i/o error
linux-manual-3.16 / mangle_path(9): Mangle and copy path to buffer beginning
linux-manual-3.16 / maple_add_packet(9): Add a single instruction to the maple bus queue
linux-manual-3.16 / maple_driver_register(9): Register a maple driver
linux-manual-3.16 / maple_driver_unregister(9): Unregister a maple driver.
linux-manual-3.16 / maple_getcond_callback(9): Setup handling maple_command_getcond
linux-manual-3.16 / mark_bbt_region(9): [generic] mark the bad block table regions
linux-manual-3.16 / mark_buffer_dirty(9): Mark a buffer_head as needing writeout
linux-manual-3.16 / matrix_keypad_parse_of_params(9): Read parameters from matrix-keypad node
s3d-doc / mcp_object(9): Master control program object
linux-manual-3.16 / mdio_bus_match(9): Determine if given phy driver supports the given phy device
linux-manual-3.16 / mdiobus_alloc_size(9): Allocate a mii_bus structure
linux-manual-3.16 / mdiobus_free(9): Free a struct mii_bus
linux-manual-3.16 / mdiobus_read(9): Convenience function for reading a given mii mgmt register
linux-manual-3.16 / mdiobus_register(9): Bring up all the phys on a given bus and attach them to bus
linux-manual-3.16 / mdiobus_release(9): Mii_bus device release callback
linux-manual-3.16 / mdiobus_write(9): Convenience function for writing a given mii mgmt register
linux-manual-3.16 / memchr(9): Find a character in an area of memory.
linux-manual-3.16 / memchr_inv(9): Find an unmatching character in an area of memory.
linux-manual-3.16 / memcmp(9): Compare two areas of memory
linux-manual-3.16 / memcpy(9): Copy one area of memory to another
linux-manual-3.16 / memdup_user(9): Duplicate memory region from user space
linux-manual-3.16 / memmove(9): Copy one area of memory to another
linux-manual-3.16 / memparse(9): Parse a string with mem suffixes into a number
linux-manual-3.16 / mempool_alloc(9): Allocate an element from a specific memory pool
linux-manual-3.16 / mempool_create(9): Create a memory pool
linux-manual-3.16 / mempool_destroy(9): Deallocate a memory pool
linux-manual-3.16 / mempool_free(9): Return an element to the pool.
linux-manual-3.16 / mempool_resize(9): Resize an existing memory pool
linux-manual-3.16 / memscan(9): Find a character in an area of memory.
linux-manual-3.16 / memset(9): Fill a region of memory with the given value
linux-manual-3.16 / memzero_explicit(9): Fill a region of memory (e.g. sensitive keying data) with 0s.
linux-manual-3.16 / might_sleep(9): Annotation for functions that can sleep
linux-manual-3.16 / min_not_zero(9): Return the minimum that is _not_ zero, unless both are zero
linux-manual-3.16 / misc_deregister(9): Unregister a miscellaneous device
linux-manual-3.16 / misc_register(9): Register a miscellaneous device
linux-manual-3.16 / mod_delayed_work_on(9): Modify delay of or queue a delayed work on specific cpu
linux-manual-3.16 / mod_timer(9): Modify a timers timeout
linux-manual-3.16 / mod_timer_pending(9): Modify a pending timers timeout
linux-manual-3.16 / mod_timer_pinned(9): Modify a timers timeout
linux-manual-3.16 / modecpy(9): Prepare response for mode sense
linux-manual-3.16 / module_driver(9): Helper macro for drivers that dont do anything special in module init/exit. this eliminates a lot of boilerplate. each module may only use this macro once, and calling it replaces module_init and module_exit.
linux-manual-3.16 / module_exit(9): Driver exit entry point
linux-manual-3.16 / module_i2c_driver(9): Helper macro for registering a i2c driver
linux-manual-3.16 / module_init(9): Driver initialization entry point
linux-manual-3.16 / module_spi_driver(9): Helper macro for registering a spi driver
linux-manual-3.16 / module_usb_driver(9): Helper macro for registering a usb driver
linux-manual-3.16 / mpage_readpages(9): Populate an address space with some pages & start reads against them
linux-manual-3.16 / mpage_writepages(9): Walk the list of dirty pages of the given address space & writepage all of them
linux-manual-3.16 / mpt_GetIocState(9): Get the current state of a mpt adapter.
linux-manual-3.16 / mpt_GetScsiPortSettings(9): Read scsi port page 0 and 2
linux-manual-3.16 / mpt_HardResetHandler(9): Generic reset handler
linux-manual-3.16 / mpt_SoftResetHandler(9): Issues a less expensive reset
linux-manual-3.16 / mpt_Soft_Hard_ResetHandler(9): Try less expensive reset
linux-manual-3.16 / mpt_adapter_disable(9): Disable misbehaving mpt adapter.
linux-manual-3.16 / mpt_adapter_dispose(9): Free all resources associated with an mpt adapter
linux-manual-3.16 / mpt_add_chain(9): Place a 32 bit chain sge at address paddr.
linux-manual-3.16 / mpt_add_chain_64bit(9): Place a 64 bit chain sge at address paddr.
linux-manual-3.16 / mpt_add_sge(9): Place a simple 32 bit sge at address paddr.
linux-manual-3.16 / mpt_add_sge_64bit(9): Place a simple 64 bit sge at address paddr.
linux-manual-3.16 / mpt_add_sge_64bit_1078(9): Place a simple 64 bit sge at address paddr (1078 workaround).
linux-manual-3.16 / mpt_alloc_fw_memory(9): Allocate firmware memory
linux-manual-3.16 / mpt_attach(9): Install a pci intelligent mpt adapter.
linux-manual-3.16 / mpt_clear_taskmgmt_in_progress_flag(9): Clear flags associated with task management
linux-manual-3.16 / mpt_config(9): Generic function to issue config message
linux-manual-3.16 / mpt_deregister(9): Deregister a protocol drivers resources.
linux-manual-3.16 / mpt_detach(9): Remove a pci intelligent mpt adapter.
linux-manual-3.16 / mpt_detect_bound_ports(9): Search for matching pci bus/dev_function
linux-manual-3.16 / mpt_device_driver_deregister(9): Deregister device driver hooks
linux-manual-3.16 / mpt_device_driver_register(9): Register device driver hooks
linux-manual-3.16 / mpt_diag_reset(9): Perform hard reset of the adapter.
linux-manual-3.16 / mpt_do_ioc_recovery(9): Initialize or recover mpt adapter.
linux-manual-3.16 / mpt_do_upload(9): Construct and send fwupload request to mpt adapter port.
linux-manual-3.16 / mpt_downloadboot(9): Downloadboot code
linux-manual-3.16 / mpt_event_deregister(9): Deregister protocol-specific event callback handler
linux-manual-3.16 / mpt_event_register(9): Register protocol-specific event callback handler.
linux-manual-3.16 / mpt_fault_reset_work(9): Work performed on workq after ioc fault
linux-manual-3.16 / mpt_fc_log_info(9): Log information returned from fibre channel ioc.
linux-manual-3.16 / mpt_findImVolumes(9): Identify ids of hidden disks and raid volumes
linux-manual-3.16 / mpt_free_fw_memory(9): Free firmware memory
linux-manual-3.16 / mpt_free_msg_frame(9): Place mpt request frame back on freeq.
linux-manual-3.16 / mpt_get_cb_idx(9): Obtain cb_idx for registered driver
linux-manual-3.16 / mpt_get_msg_frame(9): Obtain an mpt request frame from the pool
linux-manual-3.16 / mpt_get_product_name(9): Returns product string
linux-manual-3.16 / mpt_halt_firmware(9): Halts the firmware if it is operational and panic the kernel
linux-manual-3.16 / mpt_handshake_req_reply_wait(9): Send mpt request to and receive reply from ioc via doorbell handshake method.
linux-manual-3.16 / mpt_host_page_access_control(9): Control the iocs host page buffer access
linux-manual-3.16 / mpt_host_page_alloc(9): Allocate system memory for the fw
linux-manual-3.16 / mpt_inactive_raid_list_free(9): This clears this link list.
linux-manual-3.16 / mpt_inactive_raid_volumes(9): Sets up link list of phy_disk_nums for devices belonging in an inactive volume
linux-manual-3.16 / mpt_interrupt(9): Mpt adapter (ioc) specific interrupt handler.
linux-manual-3.16 / mpt_ioc_reset(9): Base cleanup for hard reset
linux-manual-3.16 / mpt_iocstatus_info(9): Iocstatus information returned from ioc.
linux-manual-3.16 / mpt_iocstatus_info_config(9): Iocstatus information for config pages
linux-manual-3.16 / mpt_is_discovery_complete(9): Determine if discovery has completed
linux-manual-3.16 / mpt_mapresources(9): Map in memory mapped io
linux-manual-3.16 / mpt_print_ioc_summary(9): Write ascii summary of ioc to a buffer.
linux-manual-3.16 / mpt_put_msg_frame(9): Send a protocol-specific mpt request frame to an ioc
linux-manual-3.16 / mpt_put_msg_frame_hi_pri(9): Send a hi-pri protocol-specific mpt request frame
linux-manual-3.16 / mpt_raid_phys_disk_get_num_paths(9): Returns number paths associated to this phys_num
linux-manual-3.16 / mpt_raid_phys_disk_pg0(9): Returns phys disk page zero
linux-manual-3.16 / mpt_raid_phys_disk_pg1(9): Returns phys disk page 1
linux-manual-3.16 / mpt_readScsiDevicePageHeaders(9): Save version and length of sdp1
linux-manual-3.16 / mpt_register(9): Register protocol-specific main callback handler.
linux-manual-3.16 / mpt_remove_dead_ioc_func(9): Kthread context to remove dead ioc
linux-manual-3.16 / mpt_reset_deregister(9): Deregister protocol-specific ioc reset handler.
linux-manual-3.16 / mpt_reset_register(9): Register protocol-specific ioc reset handler.
linux-manual-3.16 / mpt_resume(9): Fusion mpt base driver resume routine.
linux-manual-3.16 / mpt_sas_log_info(9): Log information returned from sas ioc.
linux-manual-3.16 / mpt_send_handshake_request(9): Send mpt request via doorbell handshake method.
linux-manual-3.16 / mpt_set_taskmgmt_in_progress_flag(9): Set flags associated with task management
linux-manual-3.16 / mpt_spi_log_info(9): Log information returned from scsi parallel ioc.
linux-manual-3.16 / mpt_suspend(9): Fusion mpt base driver suspend routine.
linux-manual-3.16 / mpt_verify_adapter(9): Given ioc identifier, set pointer to its adapter structure.
linux-manual-3.16 / mptbase_reply(9): Mpt base drivers callback routine
linux-manual-3.16 / mptbase_sas_persist_operation(9): Perform operation on sas persistent table
linux-manual-3.16 / mptctl_syscall_down(9): Down the mpt adapter syscall semaphore.
linux-manual-3.16 / mptfc_exit(9): Unregisters mpt adapter(s)
linux-manual-3.16 / mptfc_init(9): Register mpt adapter(s) as scsi host(s) with scsi mid-layer.
linux-manual-3.16 / mptfc_remove(9): Remove fc infrastructure for devices
linux-manual-3.16 / mptscsih_IssueTaskMgmt(9): Generic send task management function.
linux-manual-3.16 / mptscsih_abort(9): Abort linux scsi_cmnd routine, new_eh variant
linux-manual-3.16 / mptscsih_bus_reset(9): Perform a scsi bus_reset! new_eh variant
linux-manual-3.16 / mptscsih_dev_reset(9): Perform a scsi target_reset! new_eh variant
linux-manual-3.16 / mptscsih_do_cmd(9): Do internal command.
linux-manual-3.16 / mptscsih_get_completion_code(9): Get completion code from mpt request
linux-manual-3.16 / mptscsih_get_scsi_lookup(9): Retrieves scmd entry
linux-manual-3.16 / mptscsih_getclear_scsi_lookup(9): Retrieves and clears scmd entry from scsilookup[] array list
linux-manual-3.16 / mptscsih_host_reset(9): Perform a scsi host adapter reset (new_eh variant)
linux-manual-3.16 / mptscsih_info(9): Return information about mpt adapter
linux-manual-3.16 / mptscsih_info_scsiio(9): Debug print info on reply frame
linux-manual-3.16 / mptscsih_qcmd(9): Primary fusion mpt scsi initiator io start routine.
linux-manual-3.16 / mptscsih_set_scsi_lookup(9): Write a scmd entry into the scsilookup[] array list
linux-manual-3.16 / mptscsih_synchronize_cache(9): Send synchronize_cache to all disks.
linux-manual-3.16 / mptscsih_taskmgmt_complete(9): Registered with fusion mpt base driver
linux-manual-3.16 / mptspi_exit(9): Unregisters mpt adapter(s)
linux-manual-3.16 / mptspi_init(9): Register mpt adapter(s) as scsi host(s) with scsi mid-layer.
linux-manual-3.16 / mptspi_initTarget(9): Target, lun alloc/free functionality.
linux-manual-3.16 / mptspi_is_raid(9): Determines whether target is belonging to volume
linux-manual-3.16 / mptspi_print_read_nego(9): Negotiation parameters debug info that is being read
linux-manual-3.16 / mptspi_print_write_nego(9): Negotiation parameters debug info that is being sent
linux-manual-3.16 / mptspi_setTargetNegoParms(9): Update the target negotiation parameters
linux-manual-3.16 / mptspi_writeIOCPage4(9): Write ioc page 4
linux-manual-3.16 / msleep(9): Sleep safely even with waitqueue interruptions
linux-manual-3.16 / msleep_interruptible(9): Sleep waiting for signals
linux-manual-3.16 / mtrr_add(9): Add a memory type region
linux-manual-3.16 / mtrr_del(9): Delete a memory type region
linux-manual-3.16 / mutex_init(9): Initialize the mutex
linux-manual-3.16 / mutex_is_locked(9): Is the mutex locked
linux-manual-3.16 / mutex_lock(9): Acquire the mutex
linux-manual-3.16 / mutex_lock_interruptible(9): Acquire the mutex, interruptible
linux-manual-3.16 / mutex_trylock(9): Try to acquire the mutex, without waiting
linux-manual-3.16 / mutex_unlock(9): Release the mutex
linux-manual-3.16 / nand_block_bad(9): [default] read bad block marker from the chip
linux-manual-3.16 / nand_block_checkbad(9): [generic] check if a block is marked bad
linux-manual-3.16 / nand_block_isbad(9): [mtd interface] check if block at offset is bad
linux-manual-3.16 / nand_block_markbad(9): [mtd interface] mark block at the given offset as bad
linux-manual-3.16 / nand_block_markbad_lowlevel(9): Mark a block bad
linux-manual-3.16 / nand_calculate_ecc(9): [nand interface] calculate 3-byte ecc for 256/512-byte block
linux-manual-3.16 / nand_check_wp(9): [generic] check if the chip is write protected
linux-manual-3.16 / nand_command(9): [default] send command to nand device
linux-manual-3.16 / nand_command_lp(9): [default] send command to nand large page device
linux-manual-3.16 / nand_correct_data(9): [nand interface] detect and correct bit error(s)
linux-manual-3.16 / nand_create_badblock_pattern(9): [intern] creates a bbt descriptor structure
linux-manual-3.16 / nand_default_bbt(9): [nand interface] select a default bad block table for the device
linux-manual-3.16 / nand_default_block_markbad(9): [default] mark a block bad via bad block marker
linux-manual-3.16 / nand_do_read_oob(9): [intern] nand read out-of-band
linux-manual-3.16 / nand_do_read_ops(9): [intern] read data with ecc
linux-manual-3.16 / nand_do_write_oob(9): [mtd interface] nand write out-of-band
linux-manual-3.16 / nand_do_write_ops(9): [intern] nand write with ecc
linux-manual-3.16 / nand_erase(9): [mtd interface] erase block(s)
linux-manual-3.16 / nand_erase_nand(9): [intern] erase block(s)
linux-manual-3.16 / nand_fill_oob(9): [intern] transfer client buffer to oob
linux-manual-3.16 / nand_get_device(9): [generic] get chip for selected access
linux-manual-3.16 / nand_isbad_bbt(9): [nand interface] check if a block is bad
linux-manual-3.16 / nand_lock(9): [replaceable] locks all blocks present in the device
linux-manual-3.16 / nand_markbad_bbt(9): [nand interface] mark a block bad in the bbt
linux-manual-3.16 / nand_memory_bbt(9): [generic] create a memory based bad block table
linux-manual-3.16 / nand_onfi_get_features(9): [replaceable] get features for onfi nand
linux-manual-3.16 / nand_onfi_set_features(9): [replaceable] set features for onfi nand
linux-manual-3.16 / nand_opcode_8bits(9): Nand_opcode_8bits -
linux-manual-3.16 / nand_read(9): [mtd interface] mtd compatibility function for nand_do_read_ecc
linux-manual-3.16 / nand_read_buf(9): [default] read chip data into buffer
linux-manual-3.16 / nand_read_buf16(9): [default] read chip data into buffer
linux-manual-3.16 / nand_read_byte(9): [default] read one byte from the chip
linux-manual-3.16 / nand_read_byte16(9): [default] read one byte endianness aware from the chip nand_read_byte16 - [default] read one byte endianness aware from the chip
linux-manual-3.16 / nand_read_oob(9): [mtd interface] nand read data and/or out-of-band
linux-manual-3.16 / nand_read_oob_std(9): [replaceable] the most common oob data read function
linux-manual-3.16 / nand_read_oob_syndrome(9): [replaceable] oob data read function for hw ecc with syndromes
linux-manual-3.16 / nand_read_page_hwecc(9): [replaceable] hardware ecc based page read function
linux-manual-3.16 / nand_read_page_hwecc_oob_first(9): [replaceable] hw ecc, read oob first
linux-manual-3.16 / nand_read_page_raw(9): [intern] read raw page data without ecc
linux-manual-3.16 / nand_read_page_raw_syndrome(9): [intern] read raw page data without ecc
linux-manual-3.16 / nand_read_page_swecc(9): [replaceable] software ecc based page read function
linux-manual-3.16 / nand_read_page_syndrome(9): [replaceable] hardware ecc syndrome based page read
linux-manual-3.16 / nand_read_subpage(9): [replaceable] ecc based sub-page read function
linux-manual-3.16 / nand_read_word(9): [default] read one word from the chip
linux-manual-3.16 / nand_release(9): [nand interface] free resources held by the nand device
linux-manual-3.16 / nand_release_device(9): [generic] release chip
linux-manual-3.16 / nand_resume(9): [mtd interface] resume the nand flash
linux-manual-3.16 / nand_scan(9): [nand interface] scan for the nand device
linux-manual-3.16 / nand_scan_bbt(9): [nand interface] scan, find, read and maybe create bad block table(s)
linux-manual-3.16 / nand_scan_ident(9): [nand interface] scan for the nand device
linux-manual-3.16 / nand_scan_tail(9): [nand interface] scan for the nand device
linux-manual-3.16 / nand_select_chip(9): [default] control ce line
linux-manual-3.16 / nand_setup_read_retry(9): [intern] set the read retry mode
linux-manual-3.16 / nand_suspend(9): [mtd interface] suspend the nand flash
linux-manual-3.16 / nand_sync(9): [mtd interface] sync
linux-manual-3.16 / nand_transfer_oob(9): [intern] transfer oob to client buffer
linux-manual-3.16 / nand_unlock(9): [replaceable] unlocks specified locked blocks
linux-manual-3.16 / nand_update_bbt(9): Update bad block table(s)
linux-manual-3.16 / nand_wait(9): [default] wait until the command is done
linux-manual-3.16 / nand_write(9): [mtd interface] nand write with ecc
linux-manual-3.16 / nand_write_buf(9): [default] write buffer to chip
linux-manual-3.16 / nand_write_buf16(9): [default] write buffer to chip
linux-manual-3.16 / nand_write_byte(9): [default] write single byte to chip
linux-manual-3.16 / nand_write_byte16(9): [default] write single byte to a chip with width 16
linux-manual-3.16 / nand_write_oob(9): [mtd interface] nand write data and/or out-of-band
linux-manual-3.16 / nand_write_oob_std(9): [replaceable] the most common oob data write function
linux-manual-3.16 / nand_write_oob_syndrome(9): [replaceable] oob data write function for hw ecc with syndrome - only for large page flash
linux-manual-3.16 / nand_write_page(9): [replaceable] write one page
linux-manual-3.16 / nand_write_page_hwecc(9): [replaceable] hardware ecc based page write function
linux-manual-3.16 / nand_write_page_raw(9): [intern] raw page write function
linux-manual-3.16 / nand_write_page_raw_syndrome(9): [intern] raw page write function
linux-manual-3.16 / nand_write_page_swecc(9): [replaceable] software ecc based page write function
linux-manual-3.16 / nand_write_page_syndrome(9): [replaceable] hardware ecc syndrome based page write
linux-manual-3.16 / nand_write_subpage_hwecc(9): [replacable] hardware ecc based subpage write
linux-manual-3.16 / napi_disable(9): Prevent napi from scheduling
linux-manual-3.16 / napi_enable(9): Enable napi scheduling
linux-manual-3.16 / napi_schedule(9): Schedule napi poll
linux-manual-3.16 / napi_schedule_prep(9): Check if napi can be scheduled
linux-manual-3.16 / napi_synchronize(9): Wait until napi is not running
linux-manual-3.16 / netdev_all_upper_get_next_dev_rcu(9): Get the next dev from upper list
linux-manual-3.16 / netdev_alloc_frag(9): Allocate a page fragment
linux-manual-3.16 / netdev_alloc_skb(9): Allocate an skbuff for rx on a specific device
linux-manual-3.16 / netdev_boot_setup_check(9): Check boot time settings
linux-manual-3.16 / netdev_cap_txqueue(9): Check if selected tx queue exceeds device queues
linux-manual-3.16 / netdev_change_features(9): Recalculate device features
linux-manual-3.16 / netdev_completed_queue(9): Report bytes and packets completed by device
linux-manual-3.16 / netdev_features_change(9): Device changes features
linux-manual-3.16 / netdev_has_upper_dev(9): Check if device is linked to an upper device
linux-manual-3.16 / netdev_increment_features(9): Increment feature set by one
linux-manual-3.16 / netdev_lower_get_first_private_rcu(9): Get the first -private from the lower neighbour list, rcu variant
linux-manual-3.16 / netdev_lower_get_next(9): Get the next device from the lower neighbour list
linux-manual-3.16 / netdev_lower_get_next_private(9): Get the next -private from the lower neighbour list
linux-manual-3.16 / netdev_lower_get_next_private_rcu(9): Get the next -private from the lower neighbour list, rcu variant
linux-manual-3.16 / netdev_master_upper_dev_get(9): Get master upper device
linux-manual-3.16 / netdev_master_upper_dev_get_rcu(9): Get master upper device
linux-manual-3.16 / netdev_master_upper_dev_link(9): Add a master link to the upper device
linux-manual-3.16 / netdev_notify_peers(9): Notify network peers about existence of dev
linux-manual-3.16 / netdev_priv(9): Access network device private data
linux-manual-3.16 / netdev_reset_queue(9): Reset the packets and bytes count of a network device
linux-manual-3.16 / netdev_rx_handler_register(9): Register receive handler
linux-manual-3.16 / netdev_rx_handler_unregister(9): Unregister receive handler
linux-manual-3.16 / netdev_sent_queue(9): Report the number of bytes queued to hardware
linux-manual-3.16 / netdev_state_change(9): Device changes state
linux-manual-3.16 / netdev_update_features(9): Recalculate device features
linux-manual-3.16 / netdev_upper_dev_link(9): Add a link to the upper device
linux-manual-3.16 / netdev_upper_dev_unlink(9): Removes a link to upper device
linux-manual-3.16 / netdev_upper_get_next_dev_rcu(9): Get the next dev from upper list
linux-manual-3.16 / netif_carrier_off(9): Clear carrier
linux-manual-3.16 / netif_carrier_ok(9): Test if carrier present
linux-manual-3.16 / netif_carrier_on(9): Set carrier
linux-manual-3.16 / netif_device_attach(9): Mark device as attached
linux-manual-3.16 / netif_device_detach(9): Mark device as removed
linux-manual-3.16 / netif_device_present(9): Is device available or removed
linux-manual-3.16 / netif_dormant(9): Test if carrier present
linux-manual-3.16 / netif_dormant_off(9): Set device as not dormant.
linux-manual-3.16 / netif_dormant_on(9): Mark device as dormant.
linux-manual-3.16 / netif_get_num_default_rss_queues(9): Default number of rss queues
linux-manual-3.16 / netif_is_multiqueue(9): Test if device has multiple transmit queues
linux-manual-3.16 / netif_oper_up(9): Test if device is operational
linux-manual-3.16 / netif_queue_stopped(9): Test if transmit queue is flowblocked
linux-manual-3.16 / netif_receive_skb(9): Process receive buffer from network
linux-manual-3.16 / netif_running(9): Test if up
linux-manual-3.16 / netif_rx(9): Post buffer to the network code
linux-manual-3.16 / netif_set_real_num_rx_queues(9): Set actual number of rx queues used
linux-manual-3.16 / netif_stacked_transfer_operstate(9): Transfer operstate
linux-manual-3.16 / netif_start_queue(9): Allow transmit
linux-manual-3.16 / netif_start_subqueue(9): Allow sending packets on subqueue
linux-manual-3.16 / netif_stop_queue(9): Stop transmitted packets
linux-manual-3.16 / netif_stop_subqueue(9): Stop sending packets on subqueue
linux-manual-3.16 / netif_tx_lock(9): Grab network device transmit lock
linux-manual-3.16 / netif_wake_queue(9): Restart transmit
linux-manual-3.16 / netif_wake_subqueue(9): Allow sending packets on subqueue
linux-manual-3.16 / new_inode(9): Obtain an inode
linux-manual-3.16 / node_map_pfn_alignment(9): Determine the maximum internode alignment
linux-manual-3.16 / nr_free_pagecache_pages(9): Count number of pages beyond high watermark
linux-manual-3.16 / nr_free_zone_pages(9): Count number of pages beyond high watermark
linux-manual-3.16 / of_get_drm_display_mode(9): Get a drm_display_mode from devicetree
linux-manual-3.16 / of_mdio_find_bus(9): Given an mii_bus node, find the mii_bus.
linux-manual-3.16 / page_cache_async_readahead(9): File readahead for marked pages
linux-manual-3.16 / page_cache_next_hole(9): Find the next hole (not-present entry)
linux-manual-3.16 / page_cache_prev_hole(9): Find the prev hole (not-present entry)
linux-manual-3.16 / page_cache_sync_readahead(9): Generic file readahead
linux-manual-3.16 / pagecache_get_page(9): Find and get a page reference
linux-manual-3.16 / pagecache_isize_extended(9): Update pagecache after extension of i_size
linux-manual-3.16 / panic(9): Halt the system
linux-manual-3.16 / panic_nand_get_device(9): [generic] get chip for selected access
linux-manual-3.16 / panic_nand_wait(9): [generic] wait until the command is done
linux-manual-3.16 / panic_nand_wait_ready(9): [generic] wait for the ready pin after commands.
linux-manual-3.16 / panic_nand_write(9): [mtd interface] nand write with ecc
linux-manual-3.16 / parent_len(9): Find the length of the parent portion of a pathname
linux-manual-3.16 / parport_announce_port(9): Tell device drivers about a parallel port
linux-manual-3.16 / parport_claim(9): Claim access to a parallel port device
linux-manual-3.16 / parport_claim_or_block(9): Claim access to a parallel port device
linux-manual-3.16 / parport_close(9): Close a device opened with parport_open
linux-manual-3.16 / parport_find_base(9): Find a parallel port by base address
linux-manual-3.16 / parport_find_number(9): Find a parallel port by number
linux-manual-3.16 / parport_get_port(9): Increment a ports reference count
linux-manual-3.16 / parport_negotiate(9): Negotiate an ieee 1284 mode
linux-manual-3.16 / parport_open(9): Find a device by canonical device number
linux-manual-3.16 / parport_put_port(9): Decrement a ports reference count
linux-manual-3.16 / parport_read(9): Read a block of data from a parallel port
linux-manual-3.16 / parport_register_device(9): Register a device on a parallel port
linux-manual-3.16 / parport_register_driver(9): Register a parallel port device driver
linux-manual-3.16 / parport_register_port(9): Register a parallel port
linux-manual-3.16 / parport_release(9): Give up access to a parallel port device
linux-manual-3.16 / parport_remove_port(9): Deregister a parallel port
linux-manual-3.16 / parport_set_timeout(9): Set the inactivity timeout for a device
linux-manual-3.16 / parport_unregister_device(9): Deregister a device on a parallel port
linux-manual-3.16 / parport_unregister_driver(9): Deregister a parallel port device driver
linux-manual-3.16 / parport_wait_event(9): Wait for an event on a parallel port
linux-manual-3.16 / parport_wait_peripheral(9): Wait for status lines to change in 35ms
linux-manual-3.16 / parport_write(9): Write a block of data to a parallel port
linux-manual-3.16 / parport_yield(9): Relinquish a parallel port temporarily
linux-manual-3.16 / parport_yield_blocking(9): Relinquish a parallel port temporarily
linux-manual-3.16 / part_round_stats(9): Round off the performance stats on a struct disk_stats.
linux-manual-3.16 / path_get(9): Get a reference to a path
linux-manual-3.16 / path_put(9): Put a reference to a path
linux-manual-3.16 / pci_add_dynid(9): Add a new pci device id to this driver and re-probe devices
linux-manual-3.16 / pci_adjust_legacy_attr(9): Adjustment of legacy file attributes
linux-manual-3.16 / pci_back_from_sleep(9): Turn pci device on during system-wide transition into working state
linux-manual-3.16 / pci_bus_add_device(9): Start driver for a single device
linux-manual-3.16 / pci_bus_add_devices(9): Start driver for pci devices
linux-manual-3.16 / pci_bus_alloc_resource(9): Allocate a resource from a parent bus
linux-manual-3.16 / pci_bus_find_capability(9): Query for devices capabilities
linux-manual-3.16 / pci_bus_max_busnr(9): Returns maximum pci bus number of given bus children
linux-manual-3.16 / pci_bus_set_ops(9): Set raw operations of pci bus
linux-manual-3.16 / pci_cfg_access_lock(9): Lock pci config reads/writes
linux-manual-3.16 / pci_cfg_access_trylock(9): Try to lock pci config reads/writes
linux-manual-3.16 / pci_cfg_access_unlock(9): Unlock pci config reads/writes
linux-manual-3.16 / pci_check_and_mask_intx(9): Mask intx on pending interrupt
linux-manual-3.16 / pci_check_and_unmask_intx(9): Unmask intx if no interrupt is pending
linux-manual-3.16 / pci_choose_state(9): Choose the power state of a pci device
linux-manual-3.16 / pci_clear_master(9): Disables bus-mastering for device dev
linux-manual-3.16 / pci_clear_mwi(9): Disables memory-write-invalidate for device dev
linux-manual-3.16 / pci_create_legacy_files(9): Create legacy i/o port and memory files
linux-manual-3.16 / pci_create_resource_files(9): Create resource files in sysfs for dev
linux-manual-3.16 / pci_create_slot(9): Create or increment refcount for physical pci slot
linux-manual-3.16 / pci_destroy_slot(9): Decrement refcount for physical pci slot
linux-manual-3.16 / pci_dev_driver(9): Get the pci_driver of a device
linux-manual-3.16 / pci_dev_get(9): Increments the reference count of the pci device structure
linux-manual-3.16 / pci_dev_present(9): Returns 1 if device matching the device list is present, 0 if not.
linux-manual-3.16 / pci_dev_put(9): Release a use of the pci device structure
linux-manual-3.16 / pci_dev_run_wake(9): Check if device can generate run-time wake-up events.
linux-manual-3.16 / pci_disable_device(9): Disable pci device after use
linux-manual-3.16 / pci_disable_rom(9): Disable rom decoding for a pci device
linux-manual-3.16 / pci_disable_sriov(9): Disable the sr-iov capability
linux-manual-3.16 / pci_enable_device(9): Initialize device before its used by a driver.
linux-manual-3.16 / pci_enable_device_io(9): Initialize a device for use with io space
linux-manual-3.16 / pci_enable_device_mem(9): Initialize a device for use with memory space
linux-manual-3.16 / pci_enable_msi_range(9): Configure devices msi capability structure
linux-manual-3.16 / pci_enable_msix(9): Configure devices msi-x capability structure
linux-manual-3.16 / pci_enable_msix_range(9): Configure devices msi-x capability structure
linux-manual-3.16 / pci_enable_rom(9): Enable rom decoding for a pci device
linux-manual-3.16 / pci_enable_sriov(9): Enable the sr-iov capability
linux-manual-3.16 / pci_find_bus(9): Locate pci bus from a given domain and bus number
linux-manual-3.16 / pci_find_capability(9): Query for devices capabilities
linux-manual-3.16 / pci_find_ext_capability(9): Find an extended capability
linux-manual-3.16 / pci_find_ht_capability(9): Query a devices hypertransport capabilities
linux-manual-3.16 / pci_find_next_bus(9): Begin or continue searching for a pci bus
linux-manual-3.16 / pci_find_next_ext_capability(9): Find an extended capability
linux-manual-3.16 / pci_find_next_ht_capability(9): Query a devices hypertransport capabilities
linux-manual-3.16 / pci_find_parent_resource(9): Return resource region of parent bus of given region
linux-manual-3.16 / pci_get_class(9): Begin or continue searching for a pci device by class
linux-manual-3.16 / pci_get_device(9): Begin or continue searching for a pci device by vendor/device id
linux-manual-3.16 / pci_get_domain_bus_and_slot(9): Locate pci device for a given pci domain (segment), bus, and slot
linux-manual-3.16 / pci_get_slot(9): Locate pci device for a given pci slot
linux-manual-3.16 / pci_get_subsys(9): Begin or continue searching for a pci device by vendor/subvendor/device/subdevice id
linux-manual-3.16 / pci_hp_change_slot_info(9): Changes the slots information structure in the core
linux-manual-3.16 / pci_hp_create_module_link(9): Create symbolic link to the hotplug driver module.
linux-manual-3.16 / pci_hp_deregister(9): Deregister a hotplug_slot with the pci hotplug subsystem
linux-manual-3.16 / pci_hp_remove_module_link(9): Remove symbolic link to the hotplug driver module.
linux-manual-3.16 / pci_intx(9): Enables/disables pci intx for device dev
linux-manual-3.16 / pci_intx_mask_supported(9): Probe for intx masking support
linux-manual-3.16 / pci_iomap(9): Create a virtual mapping cookie for a pci bar
linux-manual-3.16 / pci_load_and_free_saved_state(9): Reload the save state pointed to by state, and free the memory allocated for it.
linux-manual-3.16 / pci_lost_interrupt(9): Reports a lost pci interrupt
linux-manual-3.16 / pci_map_rom(9): Map a pci rom to kernel space
linux-manual-3.16 / pci_match_id(9): See if a pci device matches a given pci_id table
linux-manual-3.16 / pci_mmap_legacy_io(9): Map legacy pci io into user memory space
linux-manual-3.16 / pci_mmap_legacy_mem(9): Map legacy pci memory into user memory space
linux-manual-3.16 / pci_mmap_resource(9): Map a pci resource into user memory space
linux-manual-3.16 / pci_msi_enabled(9): Is msi enabled?
linux-manual-3.16 / pci_msi_off(9): Disables any msi or msi-x capabilities
linux-manual-3.16 / pci_msi_vec_count(9): Return the number of msi vectors a device can send
linux-manual-3.16 / pci_msix_vec_count(9): Return the number of devices msi-x table entries
linux-manual-3.16 / pci_num_vf(9): Return number of vfs associated with a pf device_release_driver
linux-manual-3.16 / pci_platform_rom(9): Provides a pointer to any rom image provided by the platform
linux-manual-3.16 / pci_pme_active(9): Enable or disable pci devices pme# function
linux-manual-3.16 / pci_pme_capable(9): Check the capability of pci device to generate pme#
linux-manual-3.16 / pci_prepare_to_sleep(9): Prepare pci device for system-wide transition into a sleep state
linux-manual-3.16 / pci_probe_reset_bus(9): Probe whether a pci bus can be reset
linux-manual-3.16 / pci_probe_reset_slot(9): Probe whether a pci slot can be reset
linux-manual-3.16 / pci_read_legacy_io(9): Read byte(s) from legacy i/o port space
linux-manual-3.16 / pci_read_rom(9): Read a pci rom
linux-manual-3.16 / pci_read_vpd(9): Read one entry from vital product data
linux-manual-3.16 / pci_reenable_device(9): Resume abandoned device
linux-manual-3.16 / pci_release_region(9): Release a pci bar
linux-manual-3.16 / pci_release_regions(9): Release reserved pci i/o and memory resources
linux-manual-3.16 / pci_release_selected_regions(9): Release selected pci i/o and memory resources
linux-manual-3.16 / pci_remove_resource_files(9): Cleanup resource files
linux-manual-3.16 / pci_remove_sysfs_dev_files(9): Cleanup pci specific sysfs files
linux-manual-3.16 / pci_request_region(9): Reserve pci i/o and memory resource
linux-manual-3.16 / pci_request_region_exclusive(9): Reserved pci i/o and memory resource
linux-manual-3.16 / pci_request_regions(9): Reserved pci i/o and memory resources
linux-manual-3.16 / pci_request_regions_exclusive(9): Reserved pci i/o and memory resources
linux-manual-3.16 / pci_request_selected_regions(9): Reserve selected pci i/o and memory resources
linux-manual-3.16 / pci_rescan_bus(9): Scan a pci bus for devices.
linux-manual-3.16 / pci_reset_bridge_secondary_bus(9): Reset the secondary bus on a pci bridge.
linux-manual-3.16 / pci_reset_bus(9): Reset a pci bus
linux-manual-3.16 / pci_reset_function(9): Quiesce and reset a pci device function
linux-manual-3.16 / pci_reset_slot(9): Reset a pci slot
linux-manual-3.16 / pci_restore_state(9): Restore the saved state of a pci device
linux-manual-3.16 / pci_save_state(9): Save the pci configuration space of a device before suspending
linux-manual-3.16 / pci_scan_slot(9): Scan a pci slot on a bus for devices.
linux-manual-3.16 / pci_select_bars(9): Make bar mask from the type of resource
linux-manual-3.16 / pci_set_cacheline_size(9): Ensure the cache_line_size register is programmed
linux-manual-3.16 / pci_set_master(9): Enables bus-mastering for device dev
linux-manual-3.16 / pci_set_mwi(9): Enables memory-write-invalidate pci transaction
linux-manual-3.16 / pci_set_pcie_reset_state(9): Set reset state for device dev
linux-manual-3.16 / pci_set_power_state(9): Set the power state of a pci device
linux-manual-3.16 / pci_sriov_get_totalvfs(9): - get total vfs supported on this device
linux-manual-3.16 / pci_sriov_set_totalvfs(9): - reduce the totalvfs available
linux-manual-3.16 / pci_stop_and_remove_bus_device(9): Remove a pci device and any children
linux-manual-3.16 / pci_store_saved_state(9): Allocate and return an opaque struct containing the device saved state.
linux-manual-3.16 / pci_try_reset_bus(9): Try to reset a pci bus
linux-manual-3.16 / pci_try_reset_function(9): Quiesce and reset a pci device function
linux-manual-3.16 / pci_try_reset_slot(9): Try to reset a pci slot
linux-manual-3.16 / pci_try_set_mwi(9): Enables memory-write-invalidate pci transaction
linux-manual-3.16 / pci_unmap_rom(9): Unmap the rom from kernel space
linux-manual-3.16 / pci_unregister_driver(9): Unregister a pci driver
linux-manual-3.16 / pci_vfs_assigned(9): Returns number of vfs are assigned to a guest
linux-manual-3.16 / pci_wait_for_pending_transaction(9): Waits for pending transaction
linux-manual-3.16 / pci_wake_from_d3(9): Enable/disable device to wake up from d3_hot or d3_cold
linux-manual-3.16 / pci_write_legacy_io(9): Write byte(s) to legacy i/o port space
linux-manual-3.16 / pci_write_rom(9): Used to enable access to the pci rom display
linux-manual-3.16 / pci_write_vpd(9): Write entry to vital product data
linux-manual-3.16 / pcie_get_minimum_link(9): Determine minimum link settings of a pci device
linux-manual-3.16 / pcie_get_mps(9): Get pci express maximum payload size
linux-manual-3.16 / pcie_get_readrq(9): Get pci express read request size
linux-manual-3.16 / pcie_set_mps(9): Set pci express maximum payload size
linux-manual-3.16 / pcie_set_readrq(9): Set pci express maximum memory read request
linux-manual-3.16 / pcim_enable_device(9): Managed pci_enable_device
linux-manual-3.16 / pcim_pin_device(9): Pin managed pci device
linux-manual-3.16 / pcix_get_max_mmrbc(9): Get pci-x maximum designed memory read byte count
linux-manual-3.16 / pcix_get_mmrbc(9): Get pci-x maximum memory read byte count
linux-manual-3.16 / pcix_set_mmrbc(9): Set pci-x maximum memory read byte count
linux-manual-3.16 / phy_aneg_done(9): Return auto-negotiation status
linux-manual-3.16 / phy_attach(9): Attach a network device to a particular phy device
linux-manual-3.16 / phy_attach_direct(9): Attach a network device to a given phy device pointer
linux-manual-3.16 / phy_change(9): Scheduled by the phy_interrupt/timer to handle phy changes
linux-manual-3.16 / phy_check_valid(9): Check if there is a valid phy setting which matches speed, duplex, and feature mask
linux-manual-3.16 / phy_clear_interrupt(9): Ack the phy devices interrupt
linux-manual-3.16 / phy_config_interrupt(9): Configure the phy device for the requested interrupts
linux-manual-3.16 / phy_connect(9): Connect an ethernet device to a phy device
linux-manual-3.16 / phy_connect_direct(9): Connect an ethernet device to a specific phy_device
linux-manual-3.16 / phy_detach(9): Detach a phy device from its network device
linux-manual-3.16 / phy_device_register(9): Register the phy device on the mdio bus
linux-manual-3.16 / phy_disable_interrupts(9): Disable the phy interrupts from the phy side
linux-manual-3.16 / phy_disconnect(9): Disable interrupts, stop state machine, and detach a phy device
linux-manual-3.16 / phy_driver_register(9): Register a phy_driver with the phy layer
linux-manual-3.16 / phy_enable_interrupts(9): Enable the interrupts from the phy side
linux-manual-3.16 / phy_error(9): Enter halted state for this phy device
linux-manual-3.16 / phy_ethtool_get_eee(9): Get eee supported and status
linux-manual-3.16 / phy_ethtool_set_eee(9): Set eee supported and status
linux-manual-3.16 / phy_ethtool_sset(9): Generic ethtool sset function, handles all the details
linux-manual-3.16 / phy_find_first(9): Finds the first phy device on the bus
linux-manual-3.16 / phy_find_setting(9): Find a phy settings array entry that matches speed & duplex
linux-manual-3.16 / phy_find_valid(9): Find a phy setting that matches the requested features mask
linux-manual-3.16 / phy_get_eee_err(9): Report the eee wake error count
linux-manual-3.16 / phy_init_eee(9): Init and check the eee feature
linux-manual-3.16 / phy_interrupt(9): Phy interrupt handler
linux-manual-3.16 / phy_mii_ioctl(9): Generic phy mii ioctl interface
linux-manual-3.16 / phy_poll_reset(9): Safely wait until a phy reset has properly completed
linux-manual-3.16 / phy_prepare_link(9): Prepares the phy layer to monitor link status
linux-manual-3.16 / phy_print_status(9): Convenience function to print out the current phy status
linux-manual-3.16 / phy_probe(9): Probe and init a phy device
linux-manual-3.16 / phy_read_mmd_indirect(9): Reads data from the mmd registers
linux-manual-3.16 / phy_register_fixup(9): Creates a new phy_fixup and adds it to the list
linux-manual-3.16 / phy_sanitize_settings(9): Make sure the phy is set to supported speed and duplex
linux-manual-3.16 / phy_start(9): Start or restart a phy device
linux-manual-3.16 / phy_start_aneg(9): Start auto-negotiation for this phy device
linux-manual-3.16 / phy_start_interrupts(9): Request and enable interrupts for a phy device
linux-manual-3.16 / phy_start_machine(9): Start phy state machine tracking
linux-manual-3.16 / phy_state_machine(9): Handle the state machine
linux-manual-3.16 / phy_stop(9): Bring down the phy link, and stop checking the status
linux-manual-3.16 / phy_stop_interrupts(9): Disable interrupts from a phy device
linux-manual-3.16 / phy_stop_machine(9): Stop the phy state machine tracking
linux-manual-3.16 / phy_write_mmd_indirect(9): Writes data to the mmd registers
linux-manual-3.16 / phys_to_virt(9): Map physical address to virtual
linux-manual-3.16 / pid_alive(9): Check that a task structure is not stale
linux-manual-3.16 / piix_check_450nx_errata(9): Check for problem 450nx setup
linux-manual-3.16 / piix_init_one(9): Register piix ata pci device with kernel services
linux-manual-3.16 / piix_pata_prereset(9): Prereset for pata host controller
linux-manual-3.16 / piix_set_dmamode(9): Initialize host controller pata dma timings
linux-manual-3.16 / piix_set_piomode(9): Initialize host controller pata pio timings
linux-manual-3.16 / platform_add_devices(9): Add a numbers of platform devices
linux-manual-3.16 / platform_create_bundle(9): Register driver and create corresponding device
linux-manual-3.16 / platform_device_add(9): Add a platform device to device hierarchy
linux-manual-3.16 / platform_device_add_data(9): Add platform-specific data to a platform device
linux-manual-3.16 / platform_device_add_resources(9): Add resources to a platform device
linux-manual-3.16 / platform_device_alloc(9): Create a platform device
linux-manual-3.16 / platform_device_del(9): Remove a platform-level device
linux-manual-3.16 / platform_device_put(9): Destroy a platform device
linux-manual-3.16 / platform_device_register(9): Add a platform-level device
linux-manual-3.16 / platform_device_register_data(9): Add a platform-level device with platform-specific data
linux-manual-3.16 / platform_device_register_full(9): Add a platform-level device with resources and platform-specific data
linux-manual-3.16 / platform_device_register_resndata(9): Add a platform-level device with resources and platform-specific data
linux-manual-3.16 / platform_device_register_simple(9): Add a platform-level device and its resources
linux-manual-3.16 / platform_device_unregister(9): Unregister a platform-level device
linux-manual-3.16 / platform_driver_probe(9): Register driver for non-hotpluggable device
linux-manual-3.16 / platform_driver_unregister(9): Unregister a driver for platform-level devices
linux-manual-3.16 / platform_get_irq(9): Get an irq for a device
linux-manual-3.16 / platform_get_irq_byname(9): Get an irq for a device by name
linux-manual-3.16 / platform_get_resource(9): Get a resource for a device
linux-manual-3.16 / platform_get_resource_byname(9): Get a resource for a device by name
linux-manual-3.16 / pnp_activate_dev(9): Activates a pnp device for use
linux-manual-3.16 / pnp_add_id(9): Adds an eisa id to the specified device
linux-manual-3.16 / pnp_disable_dev(9): Disables device
linux-manual-3.16 / pnp_is_active(9): Determines if a device is active based on its current resources
linux-manual-3.16 / pnp_register_card_driver(9): Registers a pnp card driver with the pnp layer
linux-manual-3.16 / pnp_register_protocol(9): Adds a pnp protocol to the pnp layer
linux-manual-3.16 / pnp_release_card_device(9): Call this when the driver no longer needs the device
linux-manual-3.16 / pnp_request_card_device(9): Searches for a pnp device under the specified card
linux-manual-3.16 / pnp_start_dev(9): Low-level start of the pnp device
linux-manual-3.16 / pnp_stop_dev(9): Low-level disable of the pnp device
linux-manual-3.16 / pnp_unregister_card_driver(9): Unregisters a pnp card driver from the pnp layer
linux-manual-3.16 / pnp_unregister_protocol(9): Removes a pnp protocol from the pnp layer
linux-manual-3.16 / posix_lock_file(9): Apply a posix-style lock to a file
linux-manual-3.16 / posix_lock_file_wait(9): Apply a posix-style lock to a file
linux-manual-3.16 / posix_unblock_lock(9): Stop waiting for a file lock
linux-manual-3.16 / preempt_notifier_register(9): Tell me when current is being preempted & rescheduled
linux-manual-3.16 / preempt_notifier_unregister(9): No longer interested in preemption notifications
linux-manual-3.16 / printk(9): Print a kernel message
linux-manual-3.16 / printk_timed_ratelimit(9): Caller-controlled printk ratelimiting
linux-manual-3.16 / priv_to_wiphy(9): Return the wiphy containing the priv
linux-manual-3.16 / proc_dointvec(9): Read a vector of integers
linux-manual-3.16 / proc_dointvec_jiffies(9): Read a vector of integers as seconds
linux-manual-3.16 / proc_dointvec_minmax(9): Read a vector of integers with min/max values
linux-manual-3.16 / proc_dointvec_ms_jiffies(9): Read a vector of integers as 1 milliseconds
linux-manual-3.16 / proc_dointvec_userhz_jiffies(9): Read a vector of integers as 1/user_hz seconds
linux-manual-3.16 / proc_dostring(9): Read a string sysctl
linux-manual-3.16 / proc_doulongvec_minmax(9): Read a vector of long integers with min/max values
linux-manual-3.16 / proc_doulongvec_ms_jiffies_minmax(9): Read a vector of millisecond values with min/max values
linux-manual-3.16 / proc_flush_task(9): Remove dcache entries for task from the /proc dcache.
linux-manual-3.16 / proc_print_scsidevice(9): Return data about this host
linux-manual-3.16 / proc_scsi_open(9): Glue function
linux-manual-3.16 / proc_scsi_write(9): Handle writes to /proc/scsi/scsi
linux-manual-3.16 / procmpt_create(9): Create mpt_procfs_mptbasedir entries.
linux-manual-3.16 / procmpt_destroy(9): Tear down mpt_procfs_mptbasedir entries.
linux-manual-3.16 / pskb_expand_head(9): Reallocate header of sk_buff
linux-manual-3.16 / pskb_put(9): Add data to the tail of a potentially fragmented buffer
linux-manual-3.16 / pskb_trim_rcsum(9): Trim received skb and update checksum
linux-manual-3.16 / pskb_trim_unique(9): Remove end from a paged unique (not cloned) buffer
linux-manual-3.16 / pt_regs_to_gdb_regs(9): Convert ptrace regs to gdb regs
linux-manual-3.16 / ptrace_trap_notify(9): Schedule trap to notify ptracer
linux-manual-3.16 / put_device(9): Decrement reference count.
linux-manual-3.16 / queue_delayed_work_on(9): Queue work on specific cpu after delay
linux-manual-3.16 / queue_kthread_work(9): Queue a kthread_work
linux-manual-3.16 / queue_me(9): Enqueue the futex_q on the futex_hash_bucket
linux-manual-3.16 / queue_work_on(9): Queue work on specific cpu
linux-manual-3.16 / rate_control_send_low(9): Helper for drivers for management/no-ack frames
linux-manual-3.16 / rcu_barrier(9): Wait until all in-flight call_rcu callbacks complete.
linux-manual-3.16 / rcu_barrier_bh(9): Wait until all in-flight call_rcu_bh callbacks complete.
linux-manual-3.16 / rcu_barrier_sched(9): Wait for in-flight call_rcu_sched callbacks.
linux-manual-3.16 / rcu_idle_enter(9): Inform rcu that current cpu is entering idle
linux-manual-3.16 / rcu_idle_exit(9): Inform rcu that current cpu is leaving idle
linux-manual-3.16 / rcu_is_watching(9): See if rcu thinks that the current cpu is idle
linux-manual-3.16 / rcu_read_lock_bh_held(9): Might we be in rcu-bh read-side critical section?
linux-manual-3.16 / rdev_get_drvdata(9): Get rdev regulator driver data
linux-manual-3.16 / rdev_get_id(9): Get regulator id
linux-manual-3.16 / read_abs_bbt(9): [generic] read the bad block table starting at a given page
linux-manual-3.16 / read_abs_bbts(9): [generic] read the bad block table(s) for all chips starting at a given page
linux-manual-3.16 / read_bbt(9): [generic] read the bad block table starting from page
linux-manual-3.16 / read_cache_page(9): Read into page cache, fill it if needed
linux-manual-3.16 / read_cache_page_gfp(9): Read into page cache, using specified page allocation flags.
linux-manual-3.16 / read_cache_pages(9): Populate an address space with some pages & start reads against them
linux-manual-3.16 / read_zsdata(9): Read the data port of a z8530 channel
linux-manual-3.16 / read_zsreg(9): Read a register from a z85230
linux-manual-3.16 / reallocate_resource(9): Allocate a slot in the resource tree given range & alignment. the resource will be relocated if the new size cannot be reallocated in the current location.
linux-manual-3.16 / reciprocal_scale(9): "scale" a value into range [0, ep_ro)
linux-manual-3.16 / register_adapter_interrupt(9): Register adapter interrupt handler
linux-manual-3.16 / register_blkdev(9): Register a new block device
linux-manual-3.16 / register_chrdev_region(9): Register a range of device numbers
linux-manual-3.16 / register_filesystem(9): Register a new filesystem
linux-manual-3.16 / register_framebuffer(9): Registers a frame buffer device
linux-manual-3.16 / register_netdev(9): Register a network device
linux-manual-3.16 / register_netdevice(9): Register a network device
linux-manual-3.16 / register_netdevice_notifier(9): Register a network notifier block
linux-manual-3.16 / register_security(9): Registers a security framework with the kernel
linux-manual-3.16 / register_sound_dsp(9): Register a dsp device
linux-manual-3.16 / register_sound_midi(9): Register a midi device
linux-manual-3.16 / register_sound_mixer(9): Register a mixer device
linux-manual-3.16 / register_sound_special_device(9): Register a special sound node
linux-manual-3.16 / register_syscore_ops(9): Register a set of system core operations.
linux-manual-3.16 / regulator_allow_bypass(9): Allow the regulator to go into bypass mode
linux-manual-3.16 / regulator_bulk_disable(9): Disable multiple regulator consumers
linux-manual-3.16 / regulator_bulk_enable(9): Enable multiple regulator consumers
linux-manual-3.16 / regulator_bulk_force_disable(9): Force disable multiple regulator consumers
linux-manual-3.16 / regulator_bulk_free(9): Free multiple regulator consumers
linux-manual-3.16 / regulator_bulk_get(9): Get multiple regulator consumers
linux-manual-3.16 / regulator_bulk_register_supply_alias(9): Register multiple aliases
linux-manual-3.16 / regulator_bulk_unregister_supply_alias(9): Unregister multiple aliases
linux-manual-3.16 / regulator_can_change_voltage(9): Check if regulator can change voltage
linux-manual-3.16 / regulator_count_voltages(9): Count regulator_list_voltage selectors
linux-manual-3.16 / regulator_disable(9): Disable regulator output
linux-manual-3.16 / regulator_disable_deferred(9): Disable regulator output with delay
linux-manual-3.16 / regulator_enable(9): Enable regulator output
linux-manual-3.16 / regulator_force_disable(9): Force disable regulator output
linux-manual-3.16 / regulator_get(9): Lookup and obtain a reference to a regulator.
linux-manual-3.16 / regulator_get_current_limit(9): Get regulator output current
linux-manual-3.16 / regulator_get_drvdata(9): Get regulator driver data
linux-manual-3.16 / regulator_get_exclusive(9): Obtain exclusive access to a regulator.
linux-manual-3.16 / regulator_get_linear_step(9): Return the voltage step size between vsel values
linux-manual-3.16 / regulator_get_mode(9): Get regulator operating mode
linux-manual-3.16 / regulator_get_optional(9): Obtain optional access to a regulator.
linux-manual-3.16 / regulator_get_voltage(9): Get regulator output voltage
linux-manual-3.16 / regulator_has_full_constraints(9): The system has fully specified constraints
linux-manual-3.16 / regulator_is_enabled(9): Is the regulator output enabled
linux-manual-3.16 / regulator_is_supported_voltage(9): Check if a voltage range can be supported
linux-manual-3.16 / regulator_list_voltage(9): Enumerate supported voltages
linux-manual-3.16 / regulator_mode_to_status(9): Convert a regulator mode into a status
linux-manual-3.16 / regulator_notifier_call_chain(9): Call regulator event notifier
linux-manual-3.16 / regulator_put(9): "free" the regulator source
linux-manual-3.16 / regulator_register(9): Register regulator
linux-manual-3.16 / regulator_register_notifier(9): Register regulator event notifier
linux-manual-3.16 / regulator_register_supply_alias(9): Provide device alias for supply lookup
linux-manual-3.16 / regulator_set_current_limit(9): Set regulator output current limit
linux-manual-3.16 / regulator_set_drvdata(9): Set regulator driver data
linux-manual-3.16 / regulator_set_mode(9): Set regulator operating mode
linux-manual-3.16 / regulator_set_optimum_mode(9): Set regulator optimum operating mode
linux-manual-3.16 / regulator_set_voltage(9): Set regulator output voltage
linux-manual-3.16 / regulator_set_voltage_time(9): Get raise/fall time
linux-manual-3.16 / regulator_set_voltage_time_sel(9): Get raise/fall time
linux-manual-3.16 / regulator_suspend_finish(9): Resume regulators from system wide suspend
linux-manual-3.16 / regulator_suspend_prepare(9): Prepare regulators for system wide suspend
linux-manual-3.16 / regulator_sync_voltage(9): Re-apply last regulator output voltage
linux-manual-3.16 / regulator_unregister(9): Unregister regulator
linux-manual-3.16 / regulator_unregister_notifier(9): Unregister regulator event notifier
linux-manual-3.16 / regulator_unregister_supply_alias(9): Remove device alias
linux-manual-3.16 / regulatory_hint(9): Driver hint to the wireless core a regulatory domain
linux-manual-3.16 / reinit_completion(9): Reinitialize a completion structure
linux-manual-3.16 / relay_alloc_buf(9): Allocate a channel buffer
linux-manual-3.16 / relay_buf_empty(9): Boolean, is the channel buffer empty?
linux-manual-3.16 / relay_buf_full(9): Boolean, is the channel buffer full?
linux-manual-3.16 / relay_close(9): Close the channel
linux-manual-3.16 / relay_close_buf(9): Close a channel buffer
linux-manual-3.16 / relay_create_buf(9): Allocate and initialize a channel buffer
linux-manual-3.16 / relay_destroy_buf(9): Destroy an rchan_buf struct and associated buffer
linux-manual-3.16 / relay_destroy_channel(9): Free the channel struct
linux-manual-3.16 / relay_file_mmap(9): Mmap file op for relay files
linux-manual-3.16 / relay_file_open(9): Open file op for relay files
linux-manual-3.16 / relay_file_poll(9): Poll file op for relay files
linux-manual-3.16 / relay_file_read_end_pos(9): Return the new read position
linux-manual-3.16 / relay_file_read_start_pos(9): Find the first available byte to read
linux-manual-3.16 / relay_file_read_subbuf_avail(9): Return bytes available in sub-buffer
linux-manual-3.16 / relay_file_release(9): Release file op for relay files
linux-manual-3.16 / relay_flush(9): Close the channel
linux-manual-3.16 / relay_hotcpu_callback(9): Cpu hotplug callback
linux-manual-3.16 / relay_late_setup_files(9): Triggers file creation
linux-manual-3.16 / relay_mmap_buf(9): Mmap channel buffer to process address space
linux-manual-3.16 / relay_open(9): Create a new relay channel
linux-manual-3.16 / relay_remove_buf(9): Remove a channel buffer
linux-manual-3.16 / relay_reset(9): Reset the channel
linux-manual-3.16 / relay_subbufs_consumed(9): Update the buffers sub-buffers-consumed count
linux-manual-3.16 / relay_switch_subbuf(9): Switch to a new sub-buffer
linux-manual-3.16 / release_firmware(9): Release the resource associated with a firmware image
linux-manual-3.16 / release_mem_region_adjustable(9): Release a previously reserved memory region
linux-manual-3.16 / release_resource(9): Release a previously reserved resource
linux-manual-3.16 / remap_pfn_range(9): Remap kernel memory to userspace
linux-manual-3.16 / remap_vmalloc_range(9): Map vmalloc pages to userspace
linux-manual-3.16 / remap_vmalloc_range_partial(9): Map vmalloc pages to userspace
linux-manual-3.16 / remove_irq(9): Free an interrupt
linux-manual-3.16 / replace_page_cache_page(9): Replace a pagecache page with a new one
linux-manual-3.16 / request_any_context_irq(9): Allocate an interrupt line
linux-manual-3.16 / request_dma(9): Request and reserve a system dma channel
linux-manual-3.16 / request_firmware(9): Send firmware request and wait for it
linux-manual-3.16 / request_firmware_direct(9): Load firmware directly without usermode helper
linux-manual-3.16 / request_firmware_nowait(9): Asynchronous version of request_firmware
linux-manual-3.16 / request_resource(9): Request and reserve an i/o or memory resource
linux-manual-3.16 / request_resource_conflict(9): Request and reserve an i/o or memory resource
linux-manual-3.16 / request_threaded_irq(9): Allocate an interrupt line
linux-manual-3.16 / requeue_futex(9): Requeue a futex_q from one hb to another
linux-manual-3.16 / requeue_pi_wake_futex(9): Wake a task that acquired the lock during requeue
linux-manual-3.16 / resource_alignment(9): Calculate resources alignment
linux-manual-3.16 / revalidate_disk(9): Wrapper for lower-level drivers revalidate_disk call-back
linux-manual-3.16 / rio_add_device(9): Adds a rio device to the device model
linux-manual-3.16 / rio_add_inb_buffer(9): Add buffer to an inbound mailbox queue
linux-manual-3.16 / rio_add_outb_message(9): Add rio message to an outbound mailbox queue
linux-manual-3.16 / rio_alloc_net(9): Allocate and configure a new rio network
linux-manual-3.16 / rio_basic_attach(9): Rio_basic_attach -
linux-manual-3.16 / rio_build_route_tables(9): Generate route tables from switch route entries
linux-manual-3.16 / rio_bus_init(9): Register the rapidio bus with the device model
linux-manual-3.16 / rio_chk_dev_access(9): Validate access to the specified device.
linux-manual-3.16 / rio_chk_dev_route(9): Validate route to the specified device.
linux-manual-3.16 / rio_clear_locks(9): Release all host locks and signal enumeration complete
linux-manual-3.16 / rio_clr_err_stopped(9): Clears port error-stopped states.
linux-manual-3.16 / rio_create_sysfs_dev_files(9): Create rio specific sysfs files
linux-manual-3.16 / rio_destid_alloc(9): Allocate next available destid for given network
linux-manual-3.16 / rio_destid_first(9): Return first destid in use
linux-manual-3.16 / rio_destid_free(9): Free a previously allocated destid
linux-manual-3.16 / rio_destid_next(9): Return next destid in use
linux-manual-3.16 / rio_destid_reserve(9): Reserve the specivied destid
linux-manual-3.16 / rio_dev_get(9): Increments the reference count of the rio device structure
linux-manual-3.16 / rio_dev_put(9): Release a use of the rio device structure
linux-manual-3.16 / rio_device_has_destid(9): Test if a device contains a destination id register
linux-manual-3.16 / rio_device_probe(9): Tell if a rio device structure has a matching rio device id structure
linux-manual-3.16 / rio_device_remove(9): Remove a rio device from the system
linux-manual-3.16 / rio_disc_mport(9): Start discovery through a master port
linux-manual-3.16 / rio_disc_peer(9): Recursively discovers a rio network through a master port
linux-manual-3.16 / rio_dma_prep_slave_sg(9): Rapidio specific wrapper for device_prep_slave_sg callback defined by dmaengine.
linux-manual-3.16 / rio_enable_rx_tx_port(9): Enable input receiver and output transmitter of given port
linux-manual-3.16 / rio_enum_complete(9): Tests if enumeration of a network is complete
linux-manual-3.16 / rio_enum_host(9): Set host lock and initialize host destination id
linux-manual-3.16 / rio_enum_mport(9): Start enumeration through a master port
linux-manual-3.16 / rio_enum_peer(9): Recursively enumerate a rio network through a master port
linux-manual-3.16 / rio_find_mport(9): Find rio mport by its id
linux-manual-3.16 / rio_get_asm(9): Begin or continue searching for a rio device by vid/did/asm_vid/asm_did
linux-manual-3.16 / rio_get_comptag(9): Begin or continue searching for a rio device by component tag
linux-manual-3.16 / rio_get_device(9): Begin or continue searching for a rio device by vid/did
linux-manual-3.16 / rio_get_device_id(9): Get the base/extended device id for a device
linux-manual-3.16 / rio_get_drvdata(9): Get rio driver specific data
linux-manual-3.16 / rio_get_host_deviceid_lock(9): Reads the host device id lock csr on a device
linux-manual-3.16 / rio_get_inb_message(9): Get a rio message from an inbound mailbox queue
linux-manual-3.16 / rio_get_input_status(9): Sends a link-request/input-status control symbol and returns link-response (if requested).
linux-manual-3.16 / rio_inb_pwrite_handler(9): Process inbound port-write message
linux-manual-3.16 / rio_init_dbell_res(9): Initialize a rio doorbell resource
linux-manual-3.16 / rio_init_em(9): Initializes rio error management (for switches)
linux-manual-3.16 / rio_init_mbox_res(9): Initialize a rio mailbox resource
linux-manual-3.16 / rio_is_switch(9): Tests if a rio device has switch capabilities
linux-manual-3.16 / rio_local_get_device_id(9): Get the base/extended device id for a port
linux-manual-3.16 / rio_local_read_config_16(9): Read 16 bits from local configuration space
linux-manual-3.16 / rio_local_read_config_32(9): Read 32 bits from local configuration space
linux-manual-3.16 / rio_local_read_config_8(9): Read 8 bits from local configuration space
linux-manual-3.16 / rio_local_set_device_id(9): Set the base/extended device id for a port
linux-manual-3.16 / rio_local_write_config_16(9): Write 16 bits to local configuration space
linux-manual-3.16 / rio_local_write_config_32(9): Write 32 bits to local configuration space
linux-manual-3.16 / rio_local_write_config_8(9): Write 8 bits to local configuration space
linux-manual-3.16 / rio_lock_device(9): Acquires host device lock for specified device
linux-manual-3.16 / rio_map_inb_region(9): - map inbound memory region.
linux-manual-3.16 / rio_match_bus(9): Tell if a rio device structure has a matching rio driver device id structure
linux-manual-3.16 / rio_match_device(9): Tell if a rio device has a matching rio device id structure
linux-manual-3.16 / rio_mport_chk_dev_access(9): Validate access to the specified device.
linux-manual-3.16 / rio_mport_get_efb(9): Get pointer to next extended features block
linux-manual-3.16 / rio_mport_get_feature(9): Query for devices extended features
linux-manual-3.16 / rio_mport_get_physefb(9): Helper function that returns register offset for physical layer extended features block.
linux-manual-3.16 / rio_mport_is_active(9): Tests if master port link is active
linux-manual-3.16 / rio_mport_scan(9): Execute enumeration/discovery on the specified mport
linux-manual-3.16 / rio_name(9): Get the unique rio device identifier
linux-manual-3.16 / rio_pw_enable(9): Enables/disables port-write handling by a master port
linux-manual-3.16 / rio_read_config_16(9): Read 16 bits from configuration space
linux-manual-3.16 / rio_read_config_32(9): Read 32 bits from configuration space
linux-manual-3.16 / rio_read_config_8(9): Read 8 bits from configuration space
linux-manual-3.16 / rio_register_driver(9): Register a new rio driver
linux-manual-3.16 / rio_register_scan(9): Enumeration/discovery method registration interface
linux-manual-3.16 / rio_release_dev(9): Frees a rio device struct
linux-manual-3.16 / rio_release_dma(9): Release specified dma channel
linux-manual-3.16 / rio_release_inb_dbell(9): Release inbound doorbell message service
linux-manual-3.16 / rio_release_inb_mbox(9): Release inbound mailbox message service
linux-manual-3.16 / rio_release_inb_pwrite(9): Release inbound port-write message service
linux-manual-3.16 / rio_release_outb_dbell(9): Release outbound doorbell message range
linux-manual-3.16 / rio_release_outb_mbox(9): Release outbound mailbox message service
linux-manual-3.16 / rio_remove_sysfs_dev_files(9): Cleanup rio specific sysfs files
linux-manual-3.16 / rio_request_dma(9): Request rapidio capable dma channel that supports specified target rapidio device.
linux-manual-3.16 / rio_request_inb_dbell(9): Request inbound doorbell message service
linux-manual-3.16 / rio_request_inb_mbox(9): Request inbound mailbox service
linux-manual-3.16 / rio_request_inb_pwrite(9): Request inbound port-write message service
linux-manual-3.16 / rio_request_outb_dbell(9): Request outbound doorbell message range
linux-manual-3.16 / rio_request_outb_mbox(9): Request outbound mailbox service
linux-manual-3.16 / rio_route_add_entry(9): Add a route entry to a switch routing table
linux-manual-3.16 / rio_route_clr_table(9): Clear a switch routing table
linux-manual-3.16 / rio_route_get_entry(9): Read an entry from a switch routing table
linux-manual-3.16 / rio_send_doorbell(9): Send a doorbell message to a device
linux-manual-3.16 / rio_set_device_id(9): Set the base/extended device id for a device
linux-manual-3.16 / rio_set_drvdata(9): Set rio driver specific data
linux-manual-3.16 / rio_set_port_lockout(9): Sets/clears lockout bit (rio em 1.3) for a switch port.
linux-manual-3.16 / rio_setup_device(9): Allocates and sets up a rio device
linux-manual-3.16 / rio_setup_inb_dbell(9): Bind inbound doorbell callback
linux-manual-3.16 / rio_sport_is_active(9): Tests if a switch port has an active connection.
linux-manual-3.16 / rio_std_route_add_entry(9): Add switch route table entry using standard registers defined in rio specification rev.1.3
linux-manual-3.16 / rio_std_route_clr_table(9): Clear swotch route table using standard registers defined in rio specification rev.1.3.
linux-manual-3.16 / rio_std_route_get_entry(9): Read switch route table entry (port number) associated with specified destid using standard registers defined in rio specification rev.1.3
linux-manual-3.16 / rio_unlock_device(9): Releases host device lock for specified device
linux-manual-3.16 / rio_unmap_inb_region(9): - unmap the inbound memory region
linux-manual-3.16 / rio_unregister_driver(9): Unregister a rio driver
linux-manual-3.16 / rio_unregister_scan(9): Removes enumeration/discovery method from mport
linux-manual-3.16 / rio_update_route_tables(9): Updates route tables in switches
linux-manual-3.16 / rio_write_config_16(9): Write 16 bits to configuration space
linux-manual-3.16 / rio_write_config_32(9): Write 32 bits to configuration space
linux-manual-3.16 / rio_write_config_8(9): Write 8 bits to configuration space
linux-manual-3.16 / root_device_unregister(9): Unregister and free a root device
linux-manual-3.16 / round_jiffies(9): Function to round jiffies to a full second
linux-manual-3.16 / round_jiffies_relative(9): Function to round jiffies to a full second
linux-manual-3.16 / round_jiffies_up(9): Function to round jiffies up to a full second
linux-manual-3.16 / round_jiffies_up_relative(9): Function to round jiffies up to a full second
linux-manual-3.16 / rpc_add_pipe_dir_object(9): Associate a rpc_pipe_dir_object to a directory
linux-manual-3.16 / rpc_alloc_iostats(9): Allocate an rpc_iostats structure
linux-manual-3.16 / rpc_bind_new_program(9): Bind a new rpc program to an existing client
linux-manual-3.16 / rpc_call_async(9): Perform an asynchronous rpc call
linux-manual-3.16 / rpc_call_sync(9): Perform a synchronous rpc call
linux-manual-3.16 / rpc_clone_client(9): Clone an rpc client structure
linux-manual-3.16 / rpc_clone_client_set_auth(9): Clone an rpc client structure and set its auth
linux-manual-3.16 / rpc_count_iostats(9): Tally up per-task stats
linux-manual-3.16 / rpc_create(9): Create an rpc client and transport with one call
linux-manual-3.16 / rpc_find_or_alloc_pipe_dir_object(9): Rpc_find_or_alloc_pipe_dir_object -
linux-manual-3.16 / rpc_force_rebind(9): Force transport to check that remote port is unchanged
linux-manual-3.16 / rpc_free(9): Free buffer allocated via rpc_malloc
linux-manual-3.16 / rpc_free_iostats(9): Release an rpc_iostats structure
linux-manual-3.16 / rpc_get_timeout(9): Get timeout for transport in units of hz
linux-manual-3.16 / rpc_init_pipe_dir_head(9): Initialise a struct rpc_pipe_dir_head
linux-manual-3.16 / rpc_init_pipe_dir_object(9): Initialise a struct rpc_pipe_dir_object
linux-manual-3.16 / rpc_localaddr(9): Discover local endpoint address for an rpc client
linux-manual-3.16 / rpc_malloc(9): Allocate an rpc buffer
linux-manual-3.16 / rpc_max_payload(9): Get maximum payload size for a transport, in bytes
linux-manual-3.16 / rpc_mkpipe_dentry(9): Make an rpc_pipefs file for kernel-userspace communication
linux-manual-3.16 / rpc_net_ns(9): Get the network namespace for this rpc client
linux-manual-3.16 / rpc_peeraddr(9): Extract remote peer address from clnts xprt
linux-manual-3.16 / rpc_peeraddr2str(9): Return remote peer address in printable format
linux-manual-3.16 / rpc_protocol(9): Get transport protocol number for an rpc client
linux-manual-3.16 / rpc_queue_upcall(9): Queue an upcall message to userspace
linux-manual-3.16 / rpc_remove_pipe_dir_object(9): Remove a rpc_pipe_dir_object from a directory
linux-manual-3.16 / rpc_run_task(9): Allocate a new rpc task, then run rpc_execute against it
linux-manual-3.16 / rpc_switch_client_transport(9): Rpc_switch_client_transport -
linux-manual-3.16 / rpc_unlink(9): Remove a pipe
linux-manual-3.16 / rpc_wake_up(9): Wake up all rpc_tasks
linux-manual-3.16 / rpc_wake_up_status(9): Wake up all rpc_tasks and set their status value.
linux-manual-3.16 / rpcb_getport_async(9): Obtain the port for a given rpc service on a given host
linux-manual-3.16 / rps_may_expire_flow(9): Check whether an rfs hardware filter may be removed
linux-manual-3.16 / rq_flush_dcache_pages(9): Helper function to flush all pages in a request
linux-manual-3.16 / rq_ioc(9): Determine io_context for request allocation
s3d-doc / s3d_but_info(9): Status of a button
s3d-doc / s3d_evt(9): Event information
s3d-doc / s3d_key_event(9): Key event information
s3d-doc / s3d_obj_info(9): Object information
s3d-doc / s3dw_button(9): Button of s3d widget
s3d-doc / s3dw_input(9): Input field of s3d widget
s3d-doc / s3dw_label(9): Label of s3d widget
s3d-doc / s3dw_scrollbar(9): Scrollbar of s3d widget
s3d-doc / s3dw_style(9): Style of s3d widget
s3d-doc / s3dw_surface(9): Root of s3d widget
s3d-doc / s3dw_textbox(9): Textbox of s3d widget
s3d-doc / s3dw_widget(9): S3d widget information
linux-manual-3.16 / sanitize_inquiry_string(9): Remove non-graphical chars from an inquiry result string
linux-manual-3.16 / sas_attach_transport(9): Instantiate sas transport template
linux-manual-3.16 / sas_disable_tlr(9): Setting tlr flags
linux-manual-3.16 / sas_enable_tlr(9): Setting tlr flags
linux-manual-3.16 / sas_end_device_alloc(9): Allocate an rphy for an end device
linux-manual-3.16 / sas_expander_alloc(9): Allocate an rphy for an end device
linux-manual-3.16 / sas_phy_add(9): Add a sas phy to the device hierarchy
linux-manual-3.16 / sas_phy_alloc(9): Allocates and initialize a sas phy structure
linux-manual-3.16 / sas_phy_delete(9): Remove sas phy
linux-manual-3.16 / sas_phy_free(9): Free a sas phy
linux-manual-3.16 / sas_port_add(9): Add a sas port to the device hierarchy
linux-manual-3.16 / sas_port_add_phy(9): Add another phy to a port to form a wide port
linux-manual-3.16 / sas_port_delete(9): Remove sas port
linux-manual-3.16 / sas_port_delete_phy(9): Remove a phy from a port or wide port
linux-manual-3.16 / sas_port_free(9): Free a sas port
linux-manual-3.16 / sas_port_get_phy(9): Try to take a reference on a port member
linux-manual-3.16 / sas_release_transport(9): Release sas transport template instance
linux-manual-3.16 / sas_remove_children(9): Tear down a devices sas data structures
linux-manual-3.16 / sas_remove_host(9): Tear down a scsi_hosts sas data structures
linux-manual-3.16 / sas_rphy_add(9): Add a sas remote phy to the device hierarchy
linux-manual-3.16 / sas_rphy_delete(9): Remove and free sas remote phy
linux-manual-3.16 / sas_rphy_free(9): Free a sas remote phy
linux-manual-3.16 / sas_rphy_remove(9): Remove sas remote phy
linux-manual-3.16 / sas_rphy_unlink(9): Unlink sas remote phy
linux-manual-3.16 / sas_tlr_supported(9): Checking tlr bit in vpd 0x90
linux-manual-3.16 / sata_down_spd_limit(9): Adjust sata spd limit downward
linux-manual-3.16 / sata_link_debounce(9): Debounce sata phy status
linux-manual-3.16 / sata_link_hardreset(9): Reset link via sata phy reset
linux-manual-3.16 / sata_link_init_spd(9): Initialize link-sata_spd_limit
linux-manual-3.16 / sata_link_resume(9): Resume sata link
linux-manual-3.16 / sata_link_scr_lpm(9): Manipulate scontrol ipm and spm fields
linux-manual-3.16 / sata_lpm_ignore_phy_events(9): Test if phy event should be ignored
linux-manual-3.16 / sata_print_link_status(9): Print sata link status
linux-manual-3.16 / sata_scr_read(9): Read scr register of the specified port
linux-manual-3.16 / sata_scr_valid(9): Test whether scrs are accessible
linux-manual-3.16 / sata_scr_write(9): Write scr register of the specified port
linux-manual-3.16 / sata_scr_write_flush(9): Write scr register of the specified port and flush
linux-manual-3.16 / sata_set_spd(9): Set sata spd according to spd limit
linux-manual-3.16 / sata_set_spd_needed(9): Is sata spd configuration needed
linux-manual-3.16 / sata_std_hardreset(9): Comreset w/o waiting or classification
linux-manual-3.16 / sb_end_intwrite(9): Drop write access to a superblock for internal fs purposes
linux-manual-3.16 / sb_end_pagefault(9): Drop write access to a superblock from a page fault
linux-manual-3.16 / sb_end_write(9): Drop write access to a superblock
linux-manual-3.16 / sb_start_pagefault(9): Get write access to a superblock from a page fault
linux-manual-3.16 / sb_start_write(9): Get write access to a superblock
linux-manual-3.16 / scan_read_oob(9): [generic] scan data+oob region to buffer
linux-manual-3.16 / sched_setscheduler(9): Change the scheduling policy and/or rt priority of a thread.
linux-manual-3.16 / schedule_hrtimeout(9): Sleep until timeout
linux-manual-3.16 / schedule_hrtimeout_range(9): Sleep until timeout
linux-manual-3.16 / schedule_timeout(9): Sleep until timeout
linux-manual-3.16 / scnprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / scsi_10_lba_len(9): Get lba and transfer length
linux-manual-3.16 / scsi_16_lba_len(9): Get lba and transfer length
linux-manual-3.16 / scsi_6_lba_len(9): Get lba and transfer length
linux-manual-3.16 / scsi_add_host_with_dma(9): Add a scsi host with dma device
linux-manual-3.16 / scsi_add_lun(9): Allocate and fully initialze a scsi_device
linux-manual-3.16 / scsi_add_single_device(9): Respond to user request to probe for/add device
linux-manual-3.16 / scsi_adjust_queue_depth(9): Let low level drivers change a devices queue depth
linux-manual-3.16 / scsi_alloc_sdev(9): Allocate and setup a scsi_device
linux-manual-3.16 / scsi_alloc_target(9): Allocate a new or find an existing target
linux-manual-3.16 / scsi_bios_ptable(9): Read pc partition table out of first sector of device.
linux-manual-3.16 / scsi_block_when_processing_errors(9): Prevent cmds from being queued.
linux-manual-3.16 / scsi_build_sense_buffer(9): Build sense data in a buffer
linux-manual-3.16 / scsi_cmd_get_serial(9): Assign a serial number to a command
linux-manual-3.16 / scsi_complete_async_scans(9): Wait for asynchronous scans to complete
linux-manual-3.16 / scsi_dev_info_list_add(9): Add one dev_info list entry.
linux-manual-3.16 / scsi_dev_info_list_add_str(9): Parse dev_list and add to the scsi_dev_info_list.
linux-manual-3.16 / scsi_device_get(9): Get an additional reference to a scsi_device
linux-manual-3.16 / scsi_device_lookup(9): Find a device given the host
linux-manual-3.16 / scsi_device_lookup_by_target(9): Find a device given the target
linux-manual-3.16 / scsi_device_put(9): Release a reference to a scsi_device
linux-manual-3.16 / scsi_device_quiesce(9): Block user issued commands.
linux-manual-3.16 / scsi_device_resume(9): Restart user issued commands to a quiesced device.
linux-manual-3.16 / scsi_device_set_state(9): Take the given device through the device state model.
linux-manual-3.16 / scsi_device_type(9): Return 17 char string indicating device type.
linux-manual-3.16 / scsi_dma_map(9): Perform dma mapping against commands sg lists
linux-manual-3.16 / scsi_dma_unmap(9): Unmap commands sg lists mapped by scsi_dma_map
linux-manual-3.16 / scsi_eh_finish_cmd(9): Handle a cmd that eh is finished with.
linux-manual-3.16 / scsi_eh_flush_done_q(9): Finish processed commands or retry them.
linux-manual-3.16 / scsi_eh_get_sense(9): Get device sense data.
linux-manual-3.16 / scsi_eh_prep_cmnd(9): Save a scsi command info as part of error recovery
linux-manual-3.16 / scsi_eh_ready_devs(9): Check device ready state and recover if not.
linux-manual-3.16 / scsi_eh_restore_cmnd(9): Restore a scsi command info as part of error recovery
linux-manual-3.16 / scsi_execute(9): Insert request and wait for the result
linux-manual-3.16 / scsi_exit_devinfo(9): Remove /proc/scsi/device_info & the scsi_dev_info_list
linux-manual-3.16 / scsi_exit_procfs(9): Remove scsi/scsi and scsi from procfs
linux-manual-3.16 / scsi_finish_async_scan(9): Asynchronous scan has finished
linux-manual-3.16 / scsi_finish_command(9): Cleanup and pass command back to upper layer
linux-manual-3.16 / scsi_flush_work(9): Flush a scsi_hosts workqueue.
linux-manual-3.16 / scsi_get_command(9): Allocate and setup a scsi command block
linux-manual-3.16 / scsi_get_device_flags(9): Get device specific flags from the dynamic device list.
linux-manual-3.16 / scsi_get_sense_info_fld(9): Get information field from sense data (either fixed or descriptor format)
linux-manual-3.16 / scsi_get_vpd_page(9): Get vital product data from a scsi device
linux-manual-3.16 / scsi_host_alloc(9): Register a scsi host adapter instance.
linux-manual-3.16 / scsi_host_get(9): Inc a scsi_host ref count
linux-manual-3.16 / scsi_host_lookup(9): Get a reference to a scsi_host by host no
linux-manual-3.16 / scsi_host_put(9): Dec a scsi_host ref count
linux-manual-3.16 / scsi_host_set_state(9): Take the given host through the host state model.
linux-manual-3.16 / scsi_init_devinfo(9): Set up the dynamic device list.
linux-manual-3.16 / scsi_init_procfs(9): Create scsi and scsi/scsi in procfs
linux-manual-3.16 / scsi_inq_str(9): Print inquiry data from min to max index, strip trailing whitespace
linux-manual-3.16 / scsi_internal_device_block(9): Internal function to put a device temporarily into the sdev_block state
linux-manual-3.16 / scsi_internal_device_unblock(9): Resume a device after a block request
linux-manual-3.16 / scsi_ioctl(9): Dispatch ioctl to scsi device
linux-manual-3.16 / scsi_is_sas_phy(9): Check if a struct device represents a sas phy
linux-manual-3.16 / scsi_is_sas_port(9): Check if a struct device represents a sas port
linux-manual-3.16 / scsi_is_sas_rphy(9): Check if a struct device represents a sas remote phy
linux-manual-3.16 / scsi_kmap_atomic_sg(9): Find and atomically map an sg-elemnt
linux-manual-3.16 / scsi_kunmap_atomic_sg(9): Atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
linux-manual-3.16 / scsi_mode_select(9): Issue a mode select
linux-manual-3.16 / scsi_mode_sense(9): Issue a mode sense, falling back from 10 to six bytes if necessary.
linux-manual-3.16 / scsi_netlink_exit(9): Called by scsi subsystem to disable the scsi transport netlink interface
linux-manual-3.16 / scsi_netlink_init(9): Called by scsi subsystem to initialize the scsi transport netlink interface
linux-manual-3.16 / scsi_nl_rcv_msg(9): Receive message handler.
linux-manual-3.16 / scsi_nonblockable_ioctl(9): Handle sg_scsi_reset
linux-manual-3.16 / scsi_normalize_sense(9): Normalize main elements from either fixed or descriptor sense data format into a common format.
linux-manual-3.16 / scsi_partsize(9): Parse cylinders/heads/sectors from pc partition table
linux-manual-3.16 / scsi_prep_async_scan(9): Prepare for an async scan
linux-manual-3.16 / scsi_print_status(9): Print scsi status description
linux-manual-3.16 / scsi_probe_and_add_lun(9): Probe a lun, if a lun is found add it
linux-manual-3.16 / scsi_probe_lun(9): Probe a single lun using a scsi inquiry
linux-manual-3.16 / scsi_proc_host_add(9): Add entry for this host to appropriate /proc dir
linux-manual-3.16 / scsi_proc_host_rm(9): Remove this hosts entry from /proc
linux-manual-3.16 / scsi_proc_hostdir_add(9): Create directory in /proc for a scsi host
linux-manual-3.16 / scsi_proc_hostdir_rm(9): Remove directory in /proc for a scsi host
linux-manual-3.16 / scsi_put_command(9): Free a scsi command block
linux-manual-3.16 / scsi_queue_work(9): Queue work to the scsi_host workqueue.
linux-manual-3.16 / scsi_remove_device(9): Unregister a device from the scsi bus
linux-manual-3.16 / scsi_remove_host(9): Remove a scsi host
linux-manual-3.16 / scsi_remove_single_device(9): Respond to user request to remove a device
linux-manual-3.16 / scsi_remove_target(9): Try to remove a target and all its devices
linux-manual-3.16 / scsi_report_lun_scan(9): Scan using scsi report lun results
linux-manual-3.16 / scsi_report_opcode(9): Find out if a given command opcode is supported
linux-manual-3.16 / scsi_schedule_eh(9): Schedule eh for scsi host
linux-manual-3.16 / scsi_sense_desc_find(9): Search for a given descriptor type in descriptor sense data format.
linux-manual-3.16 / scsi_sequential_lun_scan(9): Sequentially scan a scsi target
linux-manual-3.16 / scsi_target_reap(9): Check to see if target is in use and destroy if not
linux-manual-3.16 / scsi_target_reap_ref_release(9): Remove target from visibility
linux-manual-3.16 / scsi_test_unit_ready(9): Test if unit is ready
linux-manual-3.16 / scsi_track_queue_full(9): Track queue_full events to adjust queue depth
linux-manual-3.16 / scsi_unlock_floptical(9): Unlock device via a special mode sense command
linux-manual-3.16 / scsicam_bios_param(9): Determine geometry of a disk in cylinders/heads/sectors.
linux-manual-3.16 / sdev_evt_alloc(9): Allocate a new scsi event
linux-manual-3.16 / sdev_evt_send(9): Send asserted event to uevent thread
linux-manual-3.16 / sdev_evt_send_simple(9): Send asserted event to uevent thread
linux-manual-3.16 / search_bbt(9): [generic] scan the device for a specific bad block table
linux-manual-3.16 / search_read_bbts(9): [generic] scan the device for bad block table(s)
linux-manual-3.16 / security_init(9): Initializes the security framework
linux-manual-3.16 / security_module_enable(9): Load given security module on boot ?
linux-manual-3.16 / securityfs_create_dir(9): Create a directory in the securityfs filesystem
linux-manual-3.16 / securityfs_create_file(9): Create a file in the securityfs filesystem
linux-manual-3.16 / securityfs_remove(9): Removes a file or directory from the securityfs filesystem
linux-manual-3.16 / seq_escape(9): Print string into buffer, escaping some characters
linux-manual-3.16 / seq_hlist_next(9): Move to the next position of the hlist
linux-manual-3.16 / seq_hlist_next_percpu(9): Move to the next position of the percpu hlist array
linux-manual-3.16 / seq_hlist_next_rcu(9): Move to the next position of the hlist protected by rcu
linux-manual-3.16 / seq_hlist_start(9): Start an iteration of a hlist
linux-manual-3.16 / seq_hlist_start_head(9): Start an iteration of a hlist
linux-manual-3.16 / seq_hlist_start_head_rcu(9): Start an iteration of a hlist protected by rcu
linux-manual-3.16 / seq_hlist_start_percpu(9): Start an iteration of a percpu hlist array
linux-manual-3.16 / seq_hlist_start_rcu(9): Start an iteration of a hlist protected by rcu
linux-manual-3.16 / seq_lseek(9): -llseek method for sequential files.
linux-manual-3.16 / seq_open(9): Initialize sequential file
linux-manual-3.16 / seq_pad(9): Write padding spaces to buffer
linux-manual-3.16 / seq_path(9): Seq_file interface to print a pathname
linux-manual-3.16 / seq_read(9): -read method for sequential files.
linux-manual-3.16 / seq_release(9): Free the structures associated with sequential file.
linux-manual-3.16 / seq_write(9): Write arbitrary data to buffer
linux-manual-3.16 / serial8250_register_8250_port(9): Register a serial port
linux-manual-3.16 / serial8250_resume_port(9): Resume one serial port
linux-manual-3.16 / serial8250_suspend_port(9): Suspend one serial port
linux-manual-3.16 / serial8250_unregister_port(9): Remove a 16x50 serial port at runtime
linux-manual-3.16 / set_bit(9): Atomically set a bit in memory
linux-manual-3.16 / set_current_blocked(9): Change current-blocked mask
linux-manual-3.16 / set_dma_reserve(9): Set the specified number of pages reserved in the first zone
linux-manual-3.16 / set_nlink(9): Directly set an inodes link count
linux-manual-3.16 / set_pfnblock_flags_mask(9): Set the requested group of flags for a pageblock_nr_pages block of pages
linux-manual-3.16 / set_timer_slack(9): Set the allowed slack for a timer
linux-manual-3.16 / set_wiphy_dev(9): Set device pointer for wiphy
linux-manual-3.16 / setup_irq(9): Setup an interrupt
linux-manual-3.16 / setup_per_zone_wmarks(9): Called when min_free_kbytes changes or when memory is hot-{added|removed}
linux-manual-3.16 / sget(9): Find or create a superblock
linux-manual-3.16 / sh64_get_wired_dtlb_entry(9): Allocate a wired (locked-in) entry in the dtlb
linux-manual-3.16 / sh64_next_free_dtlb_entry(9): Find the next available dtlb entry
linux-manual-3.16 / sh64_put_wired_dtlb_entry(9): Free a wired (locked-in) entry in the dtlb.
linux-manual-3.16 / sh64_setup_tlb_slot(9): Load up a translation in a wired slot.
linux-manual-3.16 / sh64_teardown_tlb_slot(9): Teardown a translation.
linux-manual-3.16 / sh64_tlb_init(9): Perform initial setup for the dtlb and itlb.
linux-manual-3.16 / shost_for_each_device(9): Iterate over all devices of a host
linux-manual-3.16 / shrink_dcache_parent(9): Prune dcache
linux-manual-3.16 / shrink_dcache_sb(9): Shrink dcache for a superblock
linux-manual-3.16 / signal_delivered(9): Signal_delivered -
linux-manual-3.16 / sil_dev_config(9): Apply device/host-specific errata fixups
linux-manual-3.16 / sil_set_mode(9): Wrap set_mode functions
linux-manual-3.16 / simple_strtol(9): Convert a string to a signed long
linux-manual-3.16 / simple_strtoll(9): Convert a string to a signed long long
linux-manual-3.16 / simple_strtoul(9): Convert a string to an unsigned long
linux-manual-3.16 / simple_strtoull(9): Convert a string to an unsigned long long
linux-manual-3.16 / single_erase(9): [generic] nand standard block erase command function
linux-manual-3.16 / sk_alloc(9): All socket objects are allocated here
linux-manual-3.16 / sk_attach_filter(9): Attach a socket filter
linux-manual-3.16 / sk_capable(9): Socket global capability test
linux-manual-3.16 / sk_chk_filter(9): Verify socket filter code
linux-manual-3.16 / sk_clone_lock(9): Clone a socket, and lock its clone
linux-manual-3.16 / sk_eat_skb(9): Release a skb if it is no longer needed
linux-manual-3.16 / sk_filter(9): Run a packet through a socket filter
linux-manual-3.16 / sk_filter_select_runtime(9): Select execution runtime for bpf program
linux-manual-3.16 / sk_has_allocations(9): Check if allocations are outstanding
linux-manual-3.16 / sk_net_capable(9): Network namespace socket capability test
linux-manual-3.16 / sk_ns_capable(9): General socket capability test
linux-manual-3.16 / sk_page_frag(9): Return an appropriate page_frag
linux-manual-3.16 / sk_rmem_alloc_get(9): Returns read allocations
linux-manual-3.16 / sk_set_memalloc(9): Sets sock_memalloc
linux-manual-3.16 / sk_stream_wait_connect(9): Wait for a socket to get into the connected state
linux-manual-3.16 / sk_stream_wait_memory(9): Wait for more memory for a socket
linux-manual-3.16 / sk_stream_write_space(9): Stream socket write_space callback.
linux-manual-3.16 / sk_unattached_filter_create(9): Create an unattached filter
linux-manual-3.16 / sk_wait_data(9): Wait for data to arrive at sk_receive_queue
linux-manual-3.16 / sk_wmem_alloc_get(9): Returns write allocations
linux-manual-3.16 / skb_abort_seq_read(9): Abort a sequential read of skb data
linux-manual-3.16 / skb_append(9): Append a buffer
linux-manual-3.16 / skb_append_datato_frags(9): Append the user data to a skb
linux-manual-3.16 / skb_availroom(9): Bytes at buffer end
linux-manual-3.16 / skb_checksum_complete(9): Calculate checksum of an entire packet
linux-manual-3.16 / skb_checksum_none_assert(9): Make sure skb ip_summed is checksum_none
linux-manual-3.16 / skb_checksum_setup(9): Set up partial checksum offset
linux-manual-3.16 / skb_clone(9): Duplicate an sk_buff
linux-manual-3.16 / skb_clone_writable(9): Is the header of a clone writable
linux-manual-3.16 / skb_cloned(9): Is the buffer a clone
linux-manual-3.16 / skb_complete_tx_timestamp(9): Deliver cloned skb with tx timestamps
linux-manual-3.16 / skb_copy(9): Create private copy of an sk_buff
linux-manual-3.16 / skb_copy_and_csum_datagram_iovec(9): Copy and checkum skb to user iovec.
linux-manual-3.16 / skb_copy_bits(9): Copy bits from skb to kernel buffer
linux-manual-3.16 / skb_copy_datagram_const_iovec(9): Copy a datagram to an iovec.
linux-manual-3.16 / skb_copy_datagram_from_iovec(9): Copy a datagram from an iovec.
linux-manual-3.16 / skb_copy_datagram_iovec(9): Copy a datagram to an iovec.
linux-manual-3.16 / skb_copy_expand(9): Copy and expand sk_buff
linux-manual-3.16 / skb_copy_ubufs(9): Copy userspace skb frags buffers to kernel
linux-manual-3.16 / skb_cow(9): Copy header of skb when it is required
linux-manual-3.16 / skb_cow_data(9): Check that a socket buffers data buffers are writable
linux-manual-3.16 / skb_cow_head(9): Skb_cow but only making the head writable
linux-manual-3.16 / skb_dequeue(9): Remove from the head of the queue
linux-manual-3.16 / skb_dequeue_tail(9): Remove from the tail of the queue
linux-manual-3.16 / skb_dst(9): Returns skb dst_entry
linux-manual-3.16 / skb_dst_is_noref(9): Test if skb dst isnt refcounted
linux-manual-3.16 / skb_dst_set(9): Sets skb dst
linux-manual-3.16 / skb_dst_set_noref(9): Sets skb dst, hopefully, without taking reference
linux-manual-3.16 / skb_dst_set_noref_force(9): Sets skb dst, without taking reference
linux-manual-3.16 / skb_fill_page_desc(9): Initialise a paged fragment in an skb
linux-manual-3.16 / skb_find_text(9): Find a text pattern in skb data
linux-manual-3.16 / skb_frag_address(9): Gets the address of the data contained in a paged fragment
linux-manual-3.16 / skb_frag_address_safe(9): Gets the address of the data contained in a paged fragment
linux-manual-3.16 / skb_frag_dma_map(9): Maps a paged fragment via the dma api
linux-manual-3.16 / skb_frag_page(9): Retrieve the page referred to by a paged fragment
linux-manual-3.16 / skb_frag_ref(9): Take an addition reference on a paged fragment of an skb.
linux-manual-3.16 / skb_frag_set_page(9): Sets the page contained in a paged fragment of an skb
linux-manual-3.16 / skb_frag_unref(9): Release a reference on a paged fragment of an skb.
linux-manual-3.16 / skb_get(9): Reference buffer
linux-manual-3.16 / skb_get_timestamp(9): Get timestamp from a skb
linux-manual-3.16 / skb_gso_network_seglen(9): Return length of individual segments of a gso packet
linux-manual-3.16 / skb_gso_transport_seglen(9): Return length of individual segments of a gso packet
linux-manual-3.16 / skb_has_shared_frag(9): Can any frag be overwritten
linux-manual-3.16 / skb_head_is_locked(9): Determine if the skb-head is locked down
linux-manual-3.16 / skb_header_cloned(9): Is the header a clone
linux-manual-3.16 / skb_header_release(9): Release reference to header
linux-manual-3.16 / skb_headroom(9): Bytes at buffer head
linux-manual-3.16 / skb_insert(9): Insert a buffer
linux-manual-3.16 / skb_kill_datagram(9): Free a datagram skbuff forcibly
linux-manual-3.16 / skb_linearize(9): Convert paged skb to linear one
linux-manual-3.16 / skb_linearize_cow(9): Make sure skb is linear and writable
linux-manual-3.16 / skb_mac_gso_segment(9): Mac layer segmentation handler.
linux-manual-3.16 / skb_morph(9): Morph one skb into another
linux-manual-3.16 / skb_mstamp_get(9): Get current timestamp
linux-manual-3.16 / skb_mstamp_us_delta(9): Compute the difference in usec between two skb_mstamp
linux-manual-3.16 / skb_needs_linearize(9): Check if we need to linearize a given skb depending on the given device features.
linux-manual-3.16 / skb_orphan(9): Orphan a buffer
linux-manual-3.16 / skb_orphan_frags(9): Orphan the frags contained in a buffer
linux-manual-3.16 / skb_pad(9): Zero pad the tail of an skb
linux-manual-3.16 / skb_padto(9): Pad an skbuff up to a minimal size
linux-manual-3.16 / skb_page_frag_refill(9): Check that a page_frag contains enough room
linux-manual-3.16 / skb_partial_csum_set(9): Set up and verify partial csum values for packet
linux-manual-3.16 / skb_peek(9): Peek at the head of an sk_buff_head
linux-manual-3.16 / skb_peek_next(9): Peek skb following the given one from a queue
linux-manual-3.16 / skb_peek_tail(9): Peek at the tail of an sk_buff_head
linux-manual-3.16 / skb_postpull_rcsum(9): Update checksum for received skb after pull
linux-manual-3.16 / skb_prepare_seq_read(9): Prepare a sequential read of skb data
linux-manual-3.16 / skb_propagate_pfmemalloc(9): Propagate pfmemalloc if skb is allocated after rx page
linux-manual-3.16 / skb_pull(9): Remove data from the start of a buffer
linux-manual-3.16 / skb_pull_rcsum(9): Pull skb and update receive checksum
linux-manual-3.16 / skb_push(9): Add data to the start of a buffer
linux-manual-3.16 / skb_put(9): Add data to a buffer
linux-manual-3.16 / skb_queue_empty(9): Check if a queue is empty
linux-manual-3.16 / skb_queue_head(9): Queue a buffer at the list head
linux-manual-3.16 / skb_queue_is_first(9): Check if skb is the first entry in the queue
linux-manual-3.16 / skb_queue_is_last(9): Check if skb is the last entry in the queue
linux-manual-3.16 / skb_queue_len(9): Get queue length
linux-manual-3.16 / skb_queue_next(9): Return the next packet in the queue
linux-manual-3.16 / skb_queue_prev(9): Return the prev packet in the queue
linux-manual-3.16 / skb_queue_purge(9): Empty a list
linux-manual-3.16 / skb_queue_splice(9): Join two skb lists, this is designed for stacks
linux-manual-3.16 / skb_queue_splice_init(9): Join two skb lists and reinitialise the emptied list
linux-manual-3.16 / skb_queue_splice_tail(9): Join two skb lists, each list being a queue
linux-manual-3.16 / skb_queue_splice_tail_init(9): Join two skb lists and reinitialise the emptied list
linux-manual-3.16 / skb_queue_tail(9): Queue a buffer at the list tail
linux-manual-3.16 / skb_reserve(9): Adjust headroom
linux-manual-3.16 / skb_scrub_packet(9): Scrub an skb
linux-manual-3.16 / skb_segment(9): Perform protocol segmentation on skb.
linux-manual-3.16 / skb_seq_read(9): Sequentially read skb data
linux-manual-3.16 / skb_share_check(9): Check if buffer is shared and if so clone it
linux-manual-3.16 / skb_shared(9): Is the buffer shared
linux-manual-3.16 / skb_split(9): Split fragmented skb to two parts at length len.
linux-manual-3.16 / skb_store_bits(9): Store bits from kernel buffer to skb
linux-manual-3.16 / skb_tailroom(9): Bytes at buffer end
linux-manual-3.16 / skb_trim(9): Remove end from a buffer
linux-manual-3.16 / skb_try_coalesce(9): Try to merge skb to prior one
linux-manual-3.16 / skb_tx_error(9): Report an sk_buff xmit error
linux-manual-3.16 / skb_tx_timestamp(9): Driver hook for transmit timestamping
linux-manual-3.16 / skb_unlink(9): Remove a buffer from a list
linux-manual-3.16 / skb_unshare(9): Make a copy of a shared buffer
linux-manual-3.16 / skb_zerocopy(9): Zero copy skb to skb
linux-manual-3.16 / skip_spaces(9): Removes leading whitespace from str.
linux-manual-3.16 / sleeping_thread_to_gdb_regs(9): Convert ptrace regs to gdb regs
linux-manual-3.16 / snd_BUG(9): Give a bug warning message and stack trace
linux-manual-3.16 / snd_BUG_ON(9): Debugging check macro
linux-manual-3.16 / snd_ac97_bus(9): Create an ac97 bus component
linux-manual-3.16 / snd_ac97_get_short_name(9): Retrieve codec name
linux-manual-3.16 / snd_ac97_mixer(9): Create an codec97 component
linux-manual-3.16 / snd_ac97_pcm_assign(9): Assign ac97 slots to given pcm streams
linux-manual-3.16 / snd_ac97_pcm_close(9): Closes the given ac97 pcm
linux-manual-3.16 / snd_ac97_pcm_double_rate_rules(9): Set double rate constraints
linux-manual-3.16 / snd_ac97_pcm_open(9): Opens the given ac97 pcm
linux-manual-3.16 / snd_ac97_read(9): Read a value from the given register
linux-manual-3.16 / snd_ac97_resume(9): General resume function for ac97 codec
linux-manual-3.16 / snd_ac97_set_rate(9): Change the rate of the given input/output.
linux-manual-3.16 / snd_ac97_suspend(9): General suspend function for ac97 codec
linux-manual-3.16 / snd_ac97_tune_hardware(9): Tune up the hardware
linux-manual-3.16 / snd_ac97_update(9): Update the value on the given register
linux-manual-3.16 / snd_ac97_update_bits(9): Update the bits on the given register
linux-manual-3.16 / snd_ac97_update_power(9): Update the powerdown register
linux-manual-3.16 / snd_ac97_write(9): Write a value on the given register
linux-manual-3.16 / snd_ac97_write_cache(9): Write a value on the given register and update the cache
linux-manual-3.16 / snd_card_disconnect(9): Disconnect all apis from the file-operations (user space)
linux-manual-3.16 / snd_card_file_add(9): Add the file to the file list of the card
linux-manual-3.16 / snd_card_file_remove(9): Remove the file from the file list
linux-manual-3.16 / snd_card_new(9): Create and initialize a soundcard structure
linux-manual-3.16 / snd_card_proc_new(9): Create an info entry for the given card
linux-manual-3.16 / snd_card_register(9): Register the soundcard
linux-manual-3.16 / snd_card_set_id(9): Set card identification name
linux-manual-3.16 / snd_component_add(9): Add a component string
linux-manual-3.16 / snd_ctl_activate_id(9): Activate/inactivate the control of the given id
linux-manual-3.16 / snd_ctl_add(9): Add the control instance to the card
linux-manual-3.16 / snd_ctl_add_slave(9): Add a virtual slave control
linux-manual-3.16 / snd_ctl_add_slave_uncached(9): Add a virtual slave control
linux-manual-3.16 / snd_ctl_add_vmaster_hook(9): Add a hook to a vmaster control
linux-manual-3.16 / snd_ctl_enum_info(9): Fills the info structure for an enumerated control
linux-manual-3.16 / snd_ctl_find_id(9): Find the control instance with the given id
linux-manual-3.16 / snd_ctl_find_numid(9): Find the control instance with the given number-id
linux-manual-3.16 / snd_ctl_free_one(9): Release the control instance
linux-manual-3.16 / snd_ctl_make_virtual_master(9): Create a virtual master control
linux-manual-3.16 / snd_ctl_new1(9): Create a control instance from the template
linux-manual-3.16 / snd_ctl_remove(9): Remove the control from the card and release it
linux-manual-3.16 / snd_ctl_remove_id(9): Remove the control of the given id and release it
linux-manual-3.16 / snd_ctl_rename_id(9): Replace the id of a control on the card
linux-manual-3.16 / snd_ctl_replace(9): Replace the control instance of the card
linux-manual-3.16 / snd_ctl_sync_vmaster(9): Sync the vmaster slaves and hook
linux-manual-3.16 / snd_device_free(9): Release the device from the card
linux-manual-3.16 / snd_device_new(9): Create an alsa device component
linux-manual-3.16 / snd_device_register(9): Register the device
linux-manual-3.16 / snd_dma_alloc_pages(9): Allocate the buffer area according to the given type
linux-manual-3.16 / snd_dma_alloc_pages_fallback(9): Allocate the buffer area according to the given type with fallback
linux-manual-3.16 / snd_dma_disable(9): Stop the isa dma transfer
linux-manual-3.16 / snd_dma_free_pages(9): Release the allocated buffer
linux-manual-3.16 / snd_dma_pointer(9): Return the current pointer to dma transfer buffer in bytes
linux-manual-3.16 / snd_dma_program(9): Program an isa dma transfer
linux-manual-3.16 / snd_free_pages(9): Release the pages
linux-manual-3.16 / snd_hwdep_new(9): Create a new hwdep instance
linux-manual-3.16 / snd_info_create_card_entry(9): Create an info entry for the given card
linux-manual-3.16 / snd_info_create_module_entry(9): Create an info entry for the given module
linux-manual-3.16 / snd_info_free_entry(9): Release the info entry
linux-manual-3.16 / snd_info_get_line(9): Read one line from the procfs buffer
linux-manual-3.16 / snd_info_get_str(9): Parse a string token
linux-manual-3.16 / snd_info_register(9): Register the info entry
linux-manual-3.16 / snd_interval_list(9): Refine the interval value from the list
linux-manual-3.16 / snd_interval_ratnum(9): Refine the interval value
linux-manual-3.16 / snd_interval_refine(9): Refine the interval value of configurator
linux-manual-3.16 / snd_iprintf(9): Printf on the procfs buffer
linux-manual-3.16 / snd_jack_new(9): Create a new jack
linux-manual-3.16 / snd_jack_report(9): Report the current status of a jack
linux-manual-3.16 / snd_jack_set_key(9): Set a key mapping on a jack
linux-manual-3.16 / snd_jack_set_parent(9): Set the parent device for a jack
linux-manual-3.16 / snd_lookup_minor_data(9): Get user data of a registered device
linux-manual-3.16 / snd_malloc_pages(9): Allocate pages with the given size
linux-manual-3.16 / snd_mpu401_uart_interrupt(9): Generic mpu401-uart interrupt handler
linux-manual-3.16 / snd_mpu401_uart_interrupt_tx(9): Generic mpu401-uart transmit irq handler
linux-manual-3.16 / snd_mpu401_uart_new(9): Create an mpu401-uart instance
linux-manual-3.16 / snd_pcm_add_chmap_ctls(9): Create channel-mapping control elements
linux-manual-3.16 / snd_pcm_capture_empty(9): Check whether the capture buffer is empty
linux-manual-3.16 / snd_pcm_capture_ready(9): Check whether the capture buffer is available
linux-manual-3.16 / snd_pcm_format_big_endian(9): Check the pcm format is big-endian
linux-manual-3.16 / snd_pcm_format_cpu_endian(9): Check the pcm format is cpu-endian
linux-manual-3.16 / snd_pcm_format_linear(9): Check the pcm format is linear
linux-manual-3.16 / snd_pcm_format_little_endian(9): Check the pcm format is little-endian
linux-manual-3.16 / snd_pcm_format_physical_width(9): Return the physical bit-width of the format
linux-manual-3.16 / snd_pcm_format_set_silence(9): Set the silence data on the buffer
linux-manual-3.16 / snd_pcm_format_signed(9): Check the pcm format is signed linear
linux-manual-3.16 / snd_pcm_format_silence_64(9): Return the silent data in 8 bytes array
linux-manual-3.16 / snd_pcm_format_size(9): Return the byte size of samples on the given format
linux-manual-3.16 / snd_pcm_format_unsigned(9): Check the pcm format is unsigned linear
linux-manual-3.16 / snd_pcm_format_width(9): Return the bit-width of the format
linux-manual-3.16 / snd_pcm_hw_constraint_integer(9): Apply an integer constraint to an interval
linux-manual-3.16 / snd_pcm_hw_constraint_list(9): Apply a list of constraints to a parameter
linux-manual-3.16 / snd_pcm_hw_constraint_mask64(9): Apply the given bitmap mask constraint
linux-manual-3.16 / snd_pcm_hw_constraint_minmax(9): Apply a min/max range constraint to an interval
linux-manual-3.16 / snd_pcm_hw_constraint_msbits(9): Add a hw constraint msbits rule
linux-manual-3.16 / snd_pcm_hw_constraint_pow2(9): Add a hw constraint power-of-2 rule
linux-manual-3.16 / snd_pcm_hw_constraint_ratdens(9): Apply ratdens constraint to a parameter
linux-manual-3.16 / snd_pcm_hw_constraint_ratnums(9): Apply ratnums constraint to a parameter
linux-manual-3.16 / snd_pcm_hw_constraint_step(9): Add a hw constraint step rule
linux-manual-3.16 / snd_pcm_hw_param_first(9): Refine config space and return minimum value
linux-manual-3.16 / snd_pcm_hw_param_last(9): Refine config space and return maximum value
linux-manual-3.16 / snd_pcm_hw_param_value(9): Return params field var value
linux-manual-3.16 / snd_pcm_hw_rule_add(9): Add the hw-constraint rule
linux-manual-3.16 / snd_pcm_hw_rule_noresample(9): Add a rule to allow disabling hw resampling
linux-manual-3.16 / snd_pcm_lib_alloc_vmalloc_32_buffer(9): Allocate 32-bit-addressable buffer
linux-manual-3.16 / snd_pcm_lib_alloc_vmalloc_buffer(9): Allocate virtual dma buffer
linux-manual-3.16 / snd_pcm_lib_free_pages(9): Release the allocated dma buffer.
linux-manual-3.16 / snd_pcm_lib_free_vmalloc_buffer(9): Free vmalloc buffer
linux-manual-3.16 / snd_pcm_lib_get_vmalloc_page(9): Map vmalloc buffer offset to page struct
linux-manual-3.16 / snd_pcm_lib_ioctl(9): A generic pcm ioctl callback
linux-manual-3.16 / snd_pcm_lib_malloc_pages(9): Allocate the dma buffer
linux-manual-3.16 / snd_pcm_lib_preallocate_free_for_all(9): Release all pre-allocated buffers on the pcm
linux-manual-3.16 / snd_pcm_lib_preallocate_pages(9): Pre-allocation for the given dma type
linux-manual-3.16 / snd_pcm_lib_preallocate_pages_for_all(9): Pre-allocation for continuous memory type (all substreams)
linux-manual-3.16 / snd_pcm_limit_hw_rates(9): Determine rate_min/rate_max fields
linux-manual-3.16 / snd_pcm_new(9): Create a new pcm instance
linux-manual-3.16 / snd_pcm_new_internal(9): Create a new internal pcm instance
linux-manual-3.16 / snd_pcm_new_stream(9): Create a new pcm stream
linux-manual-3.16 / snd_pcm_period_elapsed(9): Update the pcm status for the next period
linux-manual-3.16 / snd_pcm_playback_data(9): Check whether any data exists on the playback buffer
linux-manual-3.16 / snd_pcm_playback_empty(9): Check whether the playback buffer is empty
linux-manual-3.16 / snd_pcm_playback_ready(9): Check whether the playback buffer is available
linux-manual-3.16 / snd_pcm_rate_bit_to_rate(9): Converts sndrv_pcm_rate_xxx bit to sample rate
linux-manual-3.16 / snd_pcm_rate_mask_intersect(9): Computes the intersection between two rate masks
linux-manual-3.16 / snd_pcm_rate_to_rate_bit(9): Converts sample rate to sndrv_pcm_rate_xxx bit
linux-manual-3.16 / snd_pcm_set_ops(9): Set the pcm operators
linux-manual-3.16 / snd_pcm_set_sync(9): Set the pcm sync id
linux-manual-3.16 / snd_pcm_sgbuf_ops_page(9): Get the page struct at the given offset
linux-manual-3.16 / snd_pcm_stop(9): Try to stop all running streams in the substream group
linux-manual-3.16 / snd_pcm_stream_str(9): Get a string naming the direction of a stream
linux-manual-3.16 / snd_pcm_suspend(9): Trigger suspend to all linked streams
linux-manual-3.16 / snd_pcm_suspend_all(9): Trigger suspend to all substreams in the given pcm
linux-manual-3.16 / snd_power_wait(9): Wait until the power-state is changed.
linux-manual-3.16 / snd_printd(9): Debug printk
linux-manual-3.16 / snd_printd_ratelimit(9): Snd_printd_ratelimit -
linux-manual-3.16 / snd_printdd(9): Debug printk
linux-manual-3.16 / snd_printk(9): Printk wrapper
linux-manual-3.16 / snd_rawmidi_new(9): Create a rawmidi instance
linux-manual-3.16 / snd_rawmidi_receive(9): Receive the input data from the device
linux-manual-3.16 / snd_rawmidi_set_ops(9): Set the rawmidi operators
linux-manual-3.16 / snd_rawmidi_transmit(9): Copy from the buffer to the device
linux-manual-3.16 / snd_rawmidi_transmit_ack(9): Acknowledge the transmission
linux-manual-3.16 / snd_rawmidi_transmit_empty(9): Check whether the output buffer is empty
linux-manual-3.16 / snd_rawmidi_transmit_peek(9): Copy data from the internal buffer
linux-manual-3.16 / snd_register_device(9): Register the alsa device file for the card
linux-manual-3.16 / snd_register_device_for_dev(9): Register the alsa device file for the card
linux-manual-3.16 / snd_request_card(9): Try to load the card module
linux-manual-3.16 / snd_unregister_device(9): Unregister the device on the given card
linux-manual-3.16 / snprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / sock_poll_wait(9): Place memory barrier behind the poll_wait call.
linux-manual-3.16 / sock_register(9): Add a socket protocol handler
linux-manual-3.16 / sock_release(9): Close a socket
linux-manual-3.16 / sock_unregister(9): Remove a protocol handler
linux-manual-3.16 / sockfd_lookup(9): Go from a file number to its socket slot
ax25-tools / soundmodem(9): Amateur (ax.25) packet radio network driver for soundcards
linux-manual-3.16 / spans_boundary(9): Check a packet can be isa dmad
linux-manual-3.16 / sparse_keymap_entry_from_keycode(9): Perform sparse keymap lookup
linux-manual-3.16 / sparse_keymap_entry_from_scancode(9): Perform sparse keymap lookup
linux-manual-3.16 / sparse_keymap_free(9): Free memory allocated for sparse keymap
linux-manual-3.16 / sparse_keymap_report_entry(9): Report event corresponding to given key entry
linux-manual-3.16 / sparse_keymap_report_event(9): Report event corresponding to given scancode
linux-manual-3.16 / sparse_keymap_setup(9): Set up sparse keymap for an input device
linux-manual-3.16 / sparse_memory_present_with_active_regions(9): Call memory_present for each active range
linux-manual-3.16 / spi_add_device(9): Add spi_device allocated with spi_alloc_device
linux-manual-3.16 / spi_alloc_device(9): Allocate a new spi device
linux-manual-3.16 / spi_alloc_master(9): Allocate spi master controller
linux-manual-3.16 / spi_async(9): Asynchronous spi transfer
linux-manual-3.16 / spi_async_locked(9): Version of spi_async with exclusive bus usage
linux-manual-3.16 / spi_bus_lock(9): Obtain a lock for exclusive spi bus usage
linux-manual-3.16 / spi_bus_unlock(9): Release the lock for exclusive spi bus usage
linux-manual-3.16 / spi_busnum_to_master(9): Look up master associated with bus_num
linux-manual-3.16 / spi_display_xfer_agreement(9): Print the current target transfer agreement
linux-manual-3.16 / spi_finalize_current_message(9): The current message is complete
linux-manual-3.16 / spi_finalize_current_transfer(9): Report completion of a transfer
linux-manual-3.16 / spi_get_next_queued_message(9): Called by driver to check for queued messages
linux-manual-3.16 / spi_message_init_with_transfers(9): Initialize spi_message and append transfers
linux-manual-3.16 / spi_new_device(9): Instantiate one new spi device
linux-manual-3.16 / spi_read(9): Spi synchronous read
linux-manual-3.16 / spi_register_board_info(9): Register spi devices for a given board
linux-manual-3.16 / spi_register_driver(9): Register a spi driver
linux-manual-3.16 / spi_register_master(9): Register spi master controller
linux-manual-3.16 / spi_schedule_dv_device(9): Schedule domain validation to occur on the device
linux-manual-3.16 / spi_setup(9): Setup spi mode and clock rate
linux-manual-3.16 / spi_sync(9): Blocking/synchronous spi data transfers
linux-manual-3.16 / spi_sync_locked(9): Version of spi_sync with exclusive bus usage
linux-manual-3.16 / spi_sync_transfer(9): Synchronous spi data transfer
linux-manual-3.16 / spi_unregister_driver(9): Reverse effect of spi_register_driver
linux-manual-3.16 / spi_unregister_master(9): Unregister spi master controller
linux-manual-3.16 / spi_w8r16(9): Spi synchronous 8 bit write followed by 16 bit read
linux-manual-3.16 / spi_w8r16be(9): Spi synchronous 8 bit write followed by 16 bit big-endian read
linux-manual-3.16 / spi_w8r8(9): Spi synchronous 8 bit write followed by 8 bit read
linux-manual-3.16 / spi_write(9): Spi synchronous write
linux-manual-3.16 / spi_write_then_read(9): Spi synchronous write followed by read
linux-manual-3.16 / splice_direct_to_actor(9): Splices data directly between two non-pipes
linux-manual-3.16 / splice_from_pipe(9): Splice data from a pipe to a file
linux-manual-3.16 / splice_from_pipe_begin(9): Start splicing from pipe
linux-manual-3.16 / splice_from_pipe_end(9): Finish splicing from pipe
linux-manual-3.16 / splice_from_pipe_feed(9): Feed available data from a pipe to a file
linux-manual-3.16 / splice_from_pipe_next(9): Wait for some data to splice from
linux-manual-3.16 / splice_to_pipe(9): Fill passed data into a pipe
linux-manual-3.16 / sprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / sq_flush_range(9): Flush (prefetch) a specific sq range
linux-manual-3.16 / sq_remap(9): Map a physical address through the store queues
linux-manual-3.16 / sq_unmap(9): Unmap a store queue allocation
linux-manual-3.16 / srcu_barrier(9): Wait until all in-flight call_srcu callbacks complete.
linux-manual-3.16 / srcu_batches_completed(9): Return batches completed.
linux-manual-3.16 / srp_attach_transport(9): Instantiate srp transport template
linux-manual-3.16 / srp_reconnect_rport(9): Reconnect to an srp target port
linux-manual-3.16 / srp_release_transport(9): Release srp transport template instance
linux-manual-3.16 / srp_remove_host(9): Tear down a scsi_hosts srp data structures
linux-manual-3.16 / srp_rport_add(9): Add a srp remote port to the device hierarchy
linux-manual-3.16 / srp_rport_del(9): Remove a srp remote port
linux-manual-3.16 / srp_rport_get(9): Increment rport reference count
linux-manual-3.16 / srp_rport_put(9): Decrement rport reference count
linux-manual-3.16 / srp_start_tl_fail_timers(9): Start the transport layer failure timers
linux-manual-3.16 / srp_stop_rport_timers(9): Stop the transport layer recovery timers
linux-manual-3.16 / srp_tmo_valid(9): Check timeout combination validity
linux-manual-3.16 / sscanf(9): Unformat a buffer into a list of arguments
linux-manual-3.16 / starget_for_each_device(9): Helper to walk all devices of a target
linux-manual-3.16 / strcat(9): Append one nul-terminated string to another
linux-manual-3.16 / strchr(9): Find the first occurrence of a character in a string
linux-manual-3.16 / strchrnul(9): Find and return a character in a string, or end of string
linux-manual-3.16 / strcmp(9): Compare two strings
linux-manual-3.16 / strcpy(9): Copy a nul terminated string
linux-manual-3.16 / strcspn(9): Calculate the length of the initial substring of s which does not contain letters in reject
linux-manual-3.16 / strim(9): Removes leading and trailing whitespace from s.
linux-manual-3.16 / strlcat(9): Append a length-limited, c-string to another
linux-manual-3.16 / strlcpy(9): Copy a c-string into a sized buffer
linux-manual-3.16 / strlen(9): Find the length of a string
linux-manual-3.16 / strncat(9): Append a length-limited, c-string to another
linux-manual-3.16 / strnchr(9): Find a character in a length limited string
linux-manual-3.16 / strncmp(9): Compare two length-limited strings
linux-manual-3.16 / strncpy(9): Copy a length-limited, c-string
linux-manual-3.16 / strnicmp(9): Case insensitive, length-limited string comparison
linux-manual-3.16 / strnlen(9): Find the length of a length-limited string
linux-manual-3.16 / strnstr(9): Find the first substring in a length-limited string
linux-manual-3.16 / strpbrk(9): Find the first occurrence of a set of characters
linux-manual-3.16 / strrchr(9): Find the last occurrence of a character in a string
linux-manual-3.16 / strsep(9): Split a string into tokens
linux-manual-3.16 / strspn(9): Calculate the length of the initial substring of s which only contain letters in accept
linux-manual-3.16 / strstr(9): Find the first substring in a nul terminated string
linux-manual-3.16 / strtobool(9): Convert common user inputs into boolean values
linux-manual-3.16 / struct_bss_parameters(9): Bss parameters
linux-manual-3.16 / struct_bus_type(9): The bus type of the device
linux-manual-3.16 / struct_ccw1(9): Channel command word
linux-manual-3.16 / struct_ccw_dev_id(9): Unique identifier for ccw devices
linux-manual-3.16 / struct_ccw_device(9): Channel attached device
linux-manual-3.16 / struct_ccw_driver(9): Device driver for channel attached devices
linux-manual-3.16 / struct_ccwgroup_device(9): Ccw group device
linux-manual-3.16 / struct_ccwgroup_driver(9): Driver for ccw group devices
linux-manual-3.16 / struct_cfg80211_ap_settings(9): Ap configuration
linux-manual-3.16 / struct_cfg80211_assoc_request(9): (re)association request data
linux-manual-3.16 / struct_cfg80211_auth_request(9): Authentication request data
linux-manual-3.16 / struct_cfg80211_beacon_data(9): Beacon data
linux-manual-3.16 / struct_cfg80211_bss(9): Bss description
linux-manual-3.16 / struct_cfg80211_connect_params(9): Connection parameters
linux-manual-3.16 / struct_cfg80211_crypto_settings(9): Crypto settings
linux-manual-3.16 / struct_cfg80211_deauth_request(9): Deauthentication request data
linux-manual-3.16 / struct_cfg80211_disassoc_request(9): Disassociation request data
linux-manual-3.16 / struct_cfg80211_ibss_params(9): Ibss parameters
linux-manual-3.16 / struct_cfg80211_ops(9): Backend description for wireless configuration
linux-manual-3.16 / struct_cfg80211_pmksa(9): Pmk security association
linux-manual-3.16 / struct_cfg80211_scan_request(9): Scan request description
linux-manual-3.16 / struct_cfg80211_ssid(9): Ssid description
linux-manual-3.16 / struct_ciw(9): Command information word (ciw) layout
linux-manual-3.16 / struct_class(9): Device classes
linux-manual-3.16 / struct_clk_notifier(9): Associate a clk with a notifier
linux-manual-3.16 / struct_clk_notifier_data(9): Rate data to pass to the notifier callback
linux-manual-3.16 / struct_cputime(9): Snaphsot of system and user cputime
linux-manual-3.16 / struct_debug_obj(9): Representaion of an tracked object
linux-manual-3.16 / struct_debug_obj_descr(9): Object type specific debug description structure
linux-manual-3.16 / struct_device(9): The basic device structure
linux-manual-3.16 / struct_device_driver(9): The basic device driver structure
linux-manual-3.16 / struct_drm_dp_aux(9): Displayport aux channel
linux-manual-3.16 / struct_drm_dp_aux_msg(9): Displayport aux channel transaction
linux-manual-3.16 / struct_drm_fb_helper_funcs(9): Driver callbacks for the fbdev emulation library
linux-manual-3.16 / struct_drm_flip_work(9): Flip work queue
linux-manual-3.16 / struct_drm_rect(9): Two dimensional rectangle
linux-manual-3.16 / struct_erw(9): Extended report word
linux-manual-3.16 / struct_erw_eadm(9): Eadm subchannel extended report word
linux-manual-3.16 / struct_esw0(9): Format 0 extended status word (esw)
linux-manual-3.16 / struct_esw1(9): Format 1 extended status word (esw)
linux-manual-3.16 / struct_esw2(9): Format 2 extended status word (esw)
linux-manual-3.16 / struct_esw3(9): Format 3 extended status word (esw)
linux-manual-3.16 / struct_esw_eadm(9): Eadm subchannel extended status word (esw)
linux-manual-3.16 / struct_ff_device(9): Force-feedback part of an input device
linux-manual-3.16 / struct_futex_q(9): The hashed futex queue entry, one per waiting task
linux-manual-3.16 / struct_gnet_estimator(9): Rate estimator configuration
linux-manual-3.16 / struct_gnet_stats_basic(9): Byte/packet throughput statistics
linux-manual-3.16 / struct_gnet_stats_queue(9): Queuing statistics
linux-manual-3.16 / struct_gnet_stats_rate_est(9): Rate estimator
linux-manual-3.16 / struct_gnet_stats_rate_est64(9): Rate estimator
linux-manual-3.16 / struct_handle_s(9): This is the concrete type associated with handle_t.
linux-manual-3.16 / struct_hrtimer(9): The basic hrtimer structure
linux-manual-3.16 / struct_hrtimer_clock_base(9): The timer base for a specific clock
linux-manual-3.16 / struct_hrtimer_sleeper(9): Simple sleeper structure
linux-manual-3.16 / struct_hsi_board_info(9): Hsi client board info
linux-manual-3.16 / struct_hsi_channel(9): Channel resource used by the hsi clients
linux-manual-3.16 / struct_hsi_client(9): Hsi client attached to an hsi port
linux-manual-3.16 / struct_hsi_client_driver(9): Driver associated to an hsi client
linux-manual-3.16 / struct_hsi_config(9): Configuration for rx/tx hsi modules
linux-manual-3.16 / struct_hsi_controller(9): Hsi controller device
linux-manual-3.16 / struct_hsi_msg(9): Hsi message descriptor
linux-manual-3.16 / struct_hsi_port(9): Hsi port device
linux-manual-3.16 / struct_i2c_algo_dp_aux_data(9): Driver interface structure for i2c over dp aux algorithm
linux-manual-3.16 / struct_i2c_algorithm(9): Represent i2c transfer method
linux-manual-3.16 / struct_i2c_board_info(9): Template for device creation
linux-manual-3.16 / struct_i2c_bus_recovery_info(9): I2c bus recovery information
linux-manual-3.16 / struct_i2c_client(9): Represent an i2c slave device
linux-manual-3.16 / struct_i2c_driver(9): Represent an i2c device driver
linux-manual-3.16 / struct_ieee80211_channel(9): Channel definition
linux-manual-3.16 / struct_ieee80211_conf(9): Configuration of the device
linux-manual-3.16 / struct_ieee80211_hw(9): Hardware information and state
linux-manual-3.16 / struct_ieee80211_iface_combination(9): Possible interface combination
linux-manual-3.16 / struct_ieee80211_iface_limit(9): Limit on certain interface types
linux-manual-3.16 / struct_ieee80211_key_conf(9): Key information
linux-manual-3.16 / struct_ieee80211_ops(9): Callbacks from mac80211 to the driver
linux-manual-3.16 / struct_ieee80211_radiotap_iterator(9): Tracks walk thru present radiotap args
linux-manual-3.16 / struct_ieee80211_rate(9): Bitrate definition
linux-manual-3.16 / struct_ieee80211_rx_status(9): Receive status
linux-manual-3.16 / struct_ieee80211_sta(9): Station table entry
linux-manual-3.16 / struct_ieee80211_sta_ht_cap(9): Stas ht capabilities
linux-manual-3.16 / struct_ieee80211_supported_band(9): Frequency band definition
linux-manual-3.16 / struct_ieee80211_tpt_blink(9): Throughput blink description
linux-manual-3.16 / struct_ieee80211_tx_info(9): Skb transmit information
linux-manual-3.16 / struct_ieee80211_tx_queue_params(9): Transmit queue configuration
linux-manual-3.16 / struct_ieee80211_tx_rate(9): Rate selection/status
linux-manual-3.16 / struct_ieee80211_tx_rate_control(9): Rate control information for/from rc algo
linux-manual-3.16 / struct_ieee80211_txq_params(9): Tx queue parameters
linux-manual-3.16 / struct_ieee80211_vif(9): Per-interface data
linux-manual-3.16 / struct_input_dev(9): Represents an input device
linux-manual-3.16 / struct_input_handle(9): Links input device with an input handler
linux-manual-3.16 / struct_input_handler(9): Implements one of interfaces for input devices
linux-manual-3.16 / struct_input_mt(9): State of tracked contacts
linux-manual-3.16 / struct_input_mt_pos(9): Contact position
linux-manual-3.16 / struct_input_mt_slot(9): Represents the state of an input mt slot
linux-manual-3.16 / struct_input_polled_dev(9): Simple polled input device
linux-manual-3.16 / struct_input_value(9): Input value representation
linux-manual-3.16 / struct_irb(9): Interruption response block
linux-manual-3.16 / struct_irq_affinity_notify(9): Context for notification of irq affinity changes
linux-manual-3.16 / struct_irq_chip(9): Hardware interrupt chip descriptor
linux-manual-3.16 / struct_irq_chip_generic(9): Generic irq chip data structure
linux-manual-3.16 / struct_irq_chip_regs(9): Register offsets for struct irq_gci
linux-manual-3.16 / struct_irq_chip_type(9): Generic interrupt chip instance for a flow type
linux-manual-3.16 / struct_irq_data(9): Per irq and irq chip data passed down to chip functions
linux-manual-3.16 / struct_irqaction(9): Per interrupt action descriptor
linux-manual-3.16 / struct_journal_s(9): This is the concrete type associated with journal_t.
linux-manual-3.16 / struct_key_entry(9): Keymap entry for use in sparse keymap
linux-manual-3.16 / struct_key_params(9): Key information
linux-manual-3.16 / struct_kgdb_arch(9): Describe architecture specific values.
linux-manual-3.16 / struct_kgdb_io(9): Describe the interface for an i/o driver to talk with kgdb.
linux-manual-3.16 / struct_matrix_keymap_data(9): Keymap for matrix keyboards
linux-manual-3.16 / struct_matrix_keypad_platform_data(9): Platform-dependent keypad data
linux-manual-3.16 / struct_mpath_info(9): Mesh path information
linux-manual-3.16 / struct_nand_buffers(9): Buffer structure for read/write
linux-manual-3.16 / struct_nand_chip(9): Nand private flash chip data
linux-manual-3.16 / struct_nand_ecc_ctrl(9): Control structure for ecc
linux-manual-3.16 / struct_nand_flash_dev(9): Nand flash device id structure
linux-manual-3.16 / struct_nand_hw_control(9): Control structure for hardware controller (e.g ecc generator) shared among independent devices
linux-manual-3.16 / struct_nand_manufacturers(9): Nand flash manufacturer id structure
linux-manual-3.16 / struct_pipe_buffer(9): A linux kernel pipe buffer
linux-manual-3.16 / struct_pipe_inode_info(9): A linux kernel pipe
linux-manual-3.16 / struct_platform_nand_chip(9): Chip level device structure
linux-manual-3.16 / struct_platform_nand_ctrl(9): Controller level device structure
linux-manual-3.16 / struct_platform_nand_data(9): Container structure for platform-specific data
linux-manual-3.16 / struct_rate_info(9): Bitrate information
linux-manual-3.16 / struct_regulation_constraints(9): Regulator operating constraints.
linux-manual-3.16 / struct_regulator_bulk_data(9): Data used for bulk regulator operations.
linux-manual-3.16 / struct_regulator_config(9): Dynamic regulator descriptor
linux-manual-3.16 / struct_regulator_consumer_supply(9): Supply - device mapping
linux-manual-3.16 / struct_regulator_desc(9): Static regulator descriptor
linux-manual-3.16 / struct_regulator_init_data(9): Regulator platform initialisation data.
linux-manual-3.16 / struct_regulator_linear_range(9): Specify linear voltage ranges
linux-manual-3.16 / struct_regulator_ops(9): Regulator operations.
linux-manual-3.16 / struct_regulator_state(9): Regulator state during low power system states
linux-manual-3.16 / struct_rio_dbell(9): Rio doorbell event
linux-manual-3.16 / struct_rio_dev(9): Rio device info
linux-manual-3.16 / struct_rio_driver(9): Rio driver info
linux-manual-3.16 / struct_rio_mport(9): Rio master port info
linux-manual-3.16 / struct_rio_msg(9): Rio message event
linux-manual-3.16 / struct_rio_net(9): Rio network info
linux-manual-3.16 / struct_rio_ops(9): Low-level rio configuration space operations
linux-manual-3.16 / struct_rio_scan(9): Rio enumeration and discovery operations
linux-manual-3.16 / struct_rio_scan_node(9): List node to register rapidio enumeration and discovery methods with rapidio core.
linux-manual-3.16 / struct_rio_switch(9): Rio switch info
linux-manual-3.16 / struct_rio_switch_ops(9): Per-switch operations
linux-manual-3.16 / struct_rs_control(9): Rs control structure
linux-manual-3.16 / struct_sk_buff(9): Socket buffer
linux-manual-3.16 / struct_skb_mstamp(9): Multi resolution time stamps
linux-manual-3.16 / struct_skb_shared_hwtstamps(9): Hardware time stamps
linux-manual-3.16 / struct_sock(9): Network layer representation of sockets
linux-manual-3.16 / struct_sock_common(9): Minimal network layer representation of sockets
linux-manual-3.16 / struct_socket(9): General bsd socket
linux-manual-3.16 / struct_spi_board_info(9): Board-specific template for a spi device
linux-manual-3.16 / struct_spi_device(9): Master side proxy for an spi slave device
linux-manual-3.16 / struct_spi_driver(9): Host side protocol driver
linux-manual-3.16 / struct_spi_master(9): Interface to spi master controller
linux-manual-3.16 / struct_spi_message(9): One multi-segment spi transaction
linux-manual-3.16 / struct_spi_transfer(9): A read/write buffer pair
linux-manual-3.16 / struct_sta_ampdu_mlme(9): Sta aggregation information.
linux-manual-3.16 / struct_sta_info(9): Sta information
linux-manual-3.16 / struct_station_info(9): Station information
linux-manual-3.16 / struct_station_parameters(9): Station parameters
linux-manual-3.16 / struct_sublog(9): Subchannel logout area
linux-manual-3.16 / struct_subsys_interface(9): Interfaces to device functions
linux-manual-3.16 / struct_survey_info(9): Channel survey response
linux-manual-3.16 / struct_task_cputime(9): Collected cpu time counts
linux-manual-3.16 / struct_thread_group_cputimer(9): Thread group interval timer counts
linux-manual-3.16 / struct_tid_ampdu_rx(9): Tid aggregation information (rx).
linux-manual-3.16 / struct_tid_ampdu_tx(9): Tid aggregation information (tx).
linux-manual-3.16 / struct_uio_info(9): Uio device capabilities
linux-manual-3.16 / struct_uio_mem(9): Description of a uio memory region
linux-manual-3.16 / struct_uio_port(9): Description of a uio port region
linux-manual-3.16 / struct_urb(9): Usb request block
linux-manual-3.16 / struct_usb_class_driver(9): Identifies a usb driver that wants to use the usb major number
linux-manual-3.16 / struct_usb_composite_dev(9): Represents one composite usb gadget
linux-manual-3.16 / struct_usb_composite_driver(9): Groups configurations into a gadget
linux-manual-3.16 / struct_usb_configuration(9): Represents one gadget configuration
linux-manual-3.16 / struct_usb_device(9): Kernels representation of a usb device
linux-manual-3.16 / struct_usb_device_driver(9): Identifies usb device driver to usbcore
linux-manual-3.16 / struct_usb_driver(9): Identifies usb interface driver to usbcore
linux-manual-3.16 / struct_usb_ep(9): Device side representation of usb endpoint
linux-manual-3.16 / struct_usb_function(9): Describes one function of a configuration
linux-manual-3.16 / struct_usb_gadget(9): Represents a usb slave device
linux-manual-3.16 / struct_usb_gadget_driver(9): Driver for usb slave devices
linux-manual-3.16 / struct_usb_gadget_strings(9): A set of usb strings in a given language
linux-manual-3.16 / struct_usb_host_config(9): Representation of a devices configuration
linux-manual-3.16 / struct_usb_host_endpoint(9): Host-side endpoint descriptor and queue
linux-manual-3.16 / struct_usb_interface(9): What usb device drivers talk to
linux-manual-3.16 / struct_usb_interface_cache(9): Long-term representation of a device interface
linux-manual-3.16 / struct_usb_os_desc(9): Describes os descriptors associated with one interface
linux-manual-3.16 / struct_usb_os_desc_ext_prop(9): Describes one extended property
linux-manual-3.16 / struct_usb_os_desc_table(9): Describes os descriptors associated with one interface of a usb_function
linux-manual-3.16 / struct_usb_request(9): Describes one i/o request
linux-manual-3.16 / struct_usb_sg_request(9): Support for scatter/gather i/o
linux-manual-3.16 / struct_usb_string(9): Wraps a c string and its usb id
linux-manual-3.16 / struct_usbdrv_wrap(9): Wrapper for driver-model structure
linux-manual-3.16 / struct_vif_params(9): Describes virtual interface parameters
linux-manual-3.16 / struct_w1_async_cmd(9): Execute callback from the w1_process kthread
linux-manual-3.16 / struct_w1_bus_master(9): Operations available on a bus master
linux-manual-3.16 / struct_w1_family(9): Reference counted family structure.
linux-manual-3.16 / struct_w1_family_ops(9): Operations for a family type
linux-manual-3.16 / struct_w1_master(9): One per bus master
linux-manual-3.16 / struct_w1_netlink_cmd(9): Holds the command and data
linux-manual-3.16 / struct_w1_netlink_msg(9): Holds w1 message type, id, and result
linux-manual-3.16 / struct_w1_reg_num(9): Broken out slave device id
linux-manual-3.16 / struct_w1_slave(9): Holds a single slave device on the bus
linux-manual-3.16 / struct_wimax_dev(9): Generic wimax device
linux-manual-3.16 / struct_wiphy(9): Wireless hardware description
linux-manual-3.16 / struct_wireless_dev(9): Wireless device state
linux-manual-3.16 / submit_bio(9): Submit a bio to the block device layer for i/o
linux-manual-3.16 / submit_bio_wait(9): Submit a bio, and wait until it completes
linux-manual-3.16 / subsys_dev_iter_exit(9): Finish iteration
linux-manual-3.16 / subsys_dev_iter_init(9): Initialize subsys device iterator
linux-manual-3.16 / subsys_dev_iter_next(9): Iterate to the next device
linux-manual-3.16 / subsys_find_device_by_id(9): Find a device with a specific enumeration number
linux-manual-3.16 / subsys_system_register(9): Register a subsystem at /sys/devices/system/
linux-manual-3.16 / subsys_virtual_register(9): Register a subsystem at /sys/devices/virtual/
linux-manual-3.16 / superhyway_add_device(9): Add a superhyway module
linux-manual-3.16 / superhyway_register_driver(9): Register a new superhyway driver
linux-manual-3.16 / superhyway_unregister_driver(9): Unregister a superhyway driver
linux-manual-3.16 / svc_find_xprt(9): Find an rpc transport instance
linux-manual-3.16 / svc_print_addr(9): Format rq_addr field for printing
linux-manual-3.16 / svc_reserve(9): Change the space reserved for the reply to a request.
linux-manual-3.16 / svc_xprt_names(9): Format a buffer with a list of transport names
linux-manual-3.16 / swap_buf_le16(9): Swap halves of 16-bit words in place
linux-manual-3.16 / sync_inode(9): Write an inode and its pages to disk.
linux-manual-3.16 / sync_inode_metadata(9): Write an inode to disk
linux-manual-3.16 / sync_inodes_sb(9): Sync sb inode pages
linux-manual-3.16 / sync_mapping_buffers(9): Write out & wait upon a mappings associated buffers
linux-manual-3.16 / synchronize_hardirq(9): Wait for pending hard irq handlers (on other cpus)
linux-manual-3.16 / synchronize_irq(9): Wait for pending irq handlers (on other cpus)
linux-manual-3.16 / synchronize_net(9): Synchronize with packet receive processing
linux-manual-3.16 / synchronize_rcu(9): Wait until a grace period has elapsed.
linux-manual-3.16 / synchronize_rcu_bh(9): Wait until an rcu_bh grace period has elapsed.
linux-manual-3.16 / synchronize_rcu_expedited(9): Brute-force rcu grace period
linux-manual-3.16 / synchronize_sched(9): Wait until an rcu-sched grace period has elapsed.
linux-manual-3.16 / synchronize_sched_expedited(9): Brute-force rcu-sched grace period
linux-manual-3.16 / synchronize_srcu(9): Wait for prior srcu read-side critical-section completion
linux-manual-3.16 / synchronize_srcu_expedited(9): Brute-force srcu grace period
linux-manual-3.16 / sys_acct(9): Enable/disable process accounting
linux-manual-3.16 / sys_flock(9): Flock system call.
linux-manual-3.16 / sys_get_robust_list(9): Get the robust-futex list head of a task
linux-manual-3.16 / sys_kill(9): Send a signal to a process
linux-manual-3.16 / sys_restart_syscall(9): Restart a system call
linux-manual-3.16 / sys_rt_sigaction(9): Alter an action taken by a process
linux-manual-3.16 / sys_rt_sigpending(9): Examine a pending signal that has been raised while blocked
linux-manual-3.16 / sys_rt_sigprocmask(9): Change the list of currently blocked signals
linux-manual-3.16 / sys_rt_sigqueueinfo(9): Send signal information to a signal
linux-manual-3.16 / sys_rt_sigsuspend(9): Replace the signal mask for a value with the unewset value until a signal is received
linux-manual-3.16 / sys_rt_sigtimedwait(9): Synchronously wait for queued signals specified in uthese
linux-manual-3.16 / sys_set_robust_list(9): Set the robust-futex list head of a task
linux-manual-3.16 / sys_sigpending(9): Examine pending signals
linux-manual-3.16 / sys_sigprocmask(9): Examine and change blocked signals
linux-manual-3.16 / sys_tgkill(9): Send signal to one specific thread
linux-manual-3.16 / sys_tkill(9): Send signal to one specific task
linux-manual-3.16 / syscore_resume(9): Execute all the registered system core resume callbacks.
linux-manual-3.16 / syscore_suspend(9): Execute all the registered system core suspend callbacks.
linux-manual-3.16 / sysfs_add_file_to_group(9): Add an attribute file to a pre-existing group.
linux-manual-3.16 / sysfs_chmod_file(9): Update the modified mode value on an object attribute.
linux-manual-3.16 / sysfs_create_bin_file(9): Create binary file for object.
linux-manual-3.16 / sysfs_create_file_ns(9): Create an attribute file for an object with custom ns
linux-manual-3.16 / sysfs_create_link(9): Create symlink between two objects.
linux-manual-3.16 / sysfs_remove_bin_file(9): Remove binary file for object.
linux-manual-3.16 / sysfs_remove_file_from_group(9): Remove an attribute file from a group.
linux-manual-3.16 / sysfs_remove_file_ns(9): Remove an object attribute with a custom ns tag
linux-manual-3.16 / sysfs_remove_link(9): Remove symlink in objects directory.
linux-manual-3.16 / sysfs_rename_link_ns(9): Rename symlink in objects directory.
linux-manual-3.16 / sysfs_streq(9): Return true if strings are equal, modulo trailing newline
linux-manual-3.16 / tag_pages_for_writeback(9): Tag pages to be written by write_cache_pages
linux-manual-3.16 / task_clear_jobctl_pending(9): Clear jobctl pending bits
linux-manual-3.16 / task_clear_jobctl_trapping(9): Clear jobctl trapping bit
linux-manual-3.16 / task_nice(9): Return the nice value of a given task.
linux-manual-3.16 / task_participate_group_stop(9): Participate in a group stop
linux-manual-3.16 / task_set_jobctl_pending(9): Set jobctl pending bits
linux-manual-3.16 / test_and_change_bit(9): Change a bit and return its old value
linux-manual-3.16 / test_and_clear_bit(9): Clear a bit and return its old value
linux-manual-3.16 / test_and_set_bit(9): Set a bit and return its old value
linux-manual-3.16 / test_and_set_bit_lock(9): Set a bit and return its old value for lock
linux-manual-3.16 / test_bit(9): Determine whether a bit is set
linux-manual-3.16 / thaw_bdev(9): - unlock filesystem
linux-manual-3.16 / thaw_super(9): - unlock filesystem
linux-manual-3.16 / threadgroup_lock(9): Lock threadgroup
linux-manual-3.16 / threadgroup_unlock(9): Unlock threadgroup
linux-manual-3.16 / tid_show(9): Displays tid of i2o device
linux-manual-3.16 / timespec_to_ktime(9): Convert a timespec to ktime_t format
linux-manual-3.16 / timeval_to_ktime(9): Convert a timeval to ktime_t format
linux-manual-3.16 / touch_atime(9): Update the access time
linux-manual-3.16 / trace_block_bio_backmerge(9): Merging block operation to the end of an existing operation
linux-manual-3.16 / trace_block_bio_bounce(9): Used bounce buffer when processing block operation
linux-manual-3.16 / trace_block_bio_complete(9): Completed all work on the block operation
linux-manual-3.16 / trace_block_bio_frontmerge(9): Merging block operation to the beginning of an existing operation
linux-manual-3.16 / trace_block_bio_queue(9): Putting new block io operation in queue
linux-manual-3.16 / trace_block_bio_remap(9): Map request for a logical device to the raw device
linux-manual-3.16 / trace_block_dirty_buffer(9): Mark a buffer dirty
linux-manual-3.16 / trace_block_getrq(9): Get a free request entry in queue for block io operations
linux-manual-3.16 / trace_block_plug(9): Keep operations requests in request queue
linux-manual-3.16 / trace_block_rq_abort(9): Abort block operation request
linux-manual-3.16 / trace_block_rq_complete(9): Block io operation completed by device driver
linux-manual-3.16 / trace_block_rq_insert(9): Insert block operation request into queue
linux-manual-3.16 / trace_block_rq_issue(9): Issue pending block io request operation to device driver
linux-manual-3.16 / trace_block_rq_remap(9): Map request for a block operation request
linux-manual-3.16 / trace_block_rq_requeue(9): Place block io request back on a queue
linux-manual-3.16 / trace_block_sleeprq(9): Waiting to get a free request entry in queue for block io operation
linux-manual-3.16 / trace_block_split(9): Split a single bio struct into two bio structs
linux-manual-3.16 / trace_block_touch_buffer(9): Mark a buffer accessed
linux-manual-3.16 / trace_block_unplug(9): Release of operations requests in request queue
linux-manual-3.16 / trace_irq_handler_entry(9): Called immediately before the irq action handler
linux-manual-3.16 / trace_irq_handler_exit(9): Called immediately after the irq action handler returns
linux-manual-3.16 / trace_printk(9): Printf formatting in the ftrace buffer
linux-manual-3.16 / trace_puts(9): Write a string into the ftrace buffer
linux-manual-3.16 / trace_signal_deliver(9): Called when a signal is delivered
linux-manual-3.16 / trace_signal_generate(9): Called when a signal is generated
linux-manual-3.16 / trace_softirq_entry(9): Called immediately before the softirq handler
linux-manual-3.16 / trace_softirq_exit(9): Called immediately after the softirq handler returns
linux-manual-3.16 / trace_softirq_raise(9): Called immediately when a softirq is raised
linux-manual-3.16 / trace_workqueue_activate_work(9): Called when a work gets activated
linux-manual-3.16 / trace_workqueue_execute_end(9): Called immediately after the workqueue callback
linux-manual-3.16 / trace_workqueue_execute_start(9): Called immediately before the workqueue callback
linux-manual-3.16 / trace_workqueue_queue_work(9): Called when a work gets queued
linux-manual-3.16 / transport_add_device(9): Declare a new dev for transport class association
linux-manual-3.16 / transport_class_register(9): Register an initial transport class
linux-manual-3.16 / transport_class_unregister(9): Unregister a previously registered class
linux-manual-3.16 / transport_configure_device(9): Configure an already set up device
linux-manual-3.16 / transport_destroy_device(9): Destroy a removed device
linux-manual-3.16 / transport_remove_device(9): Remove the visibility of a device
linux-manual-3.16 / transport_setup_device(9): Declare a new dev for transport class association but dont make it visible yet.
linux-manual-3.16 / truncate_inode_pages(9): Truncate *all* the pages from an offset
linux-manual-3.16 / truncate_inode_pages_final(9): Truncate *all* pages before inode dies
linux-manual-3.16 / truncate_inode_pages_range(9): Truncate range of pages specified by start & end byte offsets
linux-manual-3.16 / truncate_pagecache(9): Unmap and remove pagecache that has been truncated
linux-manual-3.16 / truncate_pagecache_range(9): Unmap and remove pagecache that is hole-punched
linux-manual-3.16 / truncate_setsize(9): Update inode and pagecache for a new file size
linux-manual-3.16 / try_to_del_timer_sync(9): Try to deactivate a timer
linux-manual-3.16 / try_to_release_page(9): Release old fs-specific metadata on a page
linux-manual-3.16 / try_to_writeback_inodes_sb(9): Try to start writeback if none underway
linux-manual-3.16 / try_to_writeback_inodes_sb_nr(9): Try to start writeback if none underway
linux-manual-3.16 / typedef_handle_t(9): The handle_t type represents a single atomic update being performed by some process.
linux-manual-3.16 / typedef_journal_t(9): The journal_t maintains all of the journaling state information for a single filesystem.
linux-manual-3.16 / uart_add_one_port(9): Attach a driver-defined port structure
linux-manual-3.16 / uart_get_baud_rate(9): Return baud rate for a particular port
linux-manual-3.16 / uart_get_divisor(9): Return uart clock divisor
linux-manual-3.16 / uart_handle_cts_change(9): Handle a change of clear-to-send state
linux-manual-3.16 / uart_handle_dcd_change(9): Handle a change of carrier detect state
linux-manual-3.16 / uart_insert_char(9): Push a char to the uart layer
linux-manual-3.16 / uart_parse_options(9): Parse serial port baud/parity/bits/flow control.
linux-manual-3.16 / uart_register_driver(9): Register a driver with the uart core layer
linux-manual-3.16 / uart_remove_one_port(9): Detach a driver defined port structure
linux-manual-3.16 / uart_set_options(9): Setup the serial console parameters
linux-manual-3.16 / uart_unregister_driver(9): Remove a driver from the uart core layer
linux-manual-3.16 / uart_update_timeout(9): Update per-port fifo timeout.
linux-manual-3.16 / uio_event_notify(9): Trigger an interrupt event
linux-manual-3.16 / uio_unregister_device(9): Unregister a industrial io device
linux-manual-3.16 / union_hdmi_infoframe(9): Overall union of all abstract infoframe representations
linux-manual-3.16 / unlock_new_inode(9): Clear the i_new state and wake up any waiters
linux-manual-3.16 / unlock_page(9): Unlock a locked page
linux-manual-3.16 / unlock_sock_fast(9): Complement of lock_sock_fast
linux-manual-3.16 / unlock_two_nondirectories(9): Release locks from lock_two_nondirectories
linux-manual-3.16 / unmap_kernel_range(9): Unmap kernel vm area and flush cache and tlb
linux-manual-3.16 / unmap_kernel_range_noflush(9): Unmap kernel vm area
linux-manual-3.16 / unmap_mapping_range(9): Unmap the portion of all mmaps in the specified address_space corresponding to the specified page range in the underlying file.
linux-manual-3.16 / unqueue_me(9): Remove the futex_q from its futex_hash_bucket
linux-manual-3.16 / unregister_adapter_interrupt(9): Unregister adapter interrupt handler
linux-manual-3.16 / unregister_chrdev_region(9): Return a range of device numbers
linux-manual-3.16 / unregister_filesystem(9): Unregister a file system
linux-manual-3.16 / unregister_framebuffer(9): Releases a frame buffer device
linux-manual-3.16 / unregister_netdev(9): Remove device from the kernel
linux-manual-3.16 / unregister_netdevice_many(9): Unregister many devices
linux-manual-3.16 / unregister_netdevice_notifier(9): Unregister a network notifier block
linux-manual-3.16 / unregister_netdevice_queue(9): Remove device from the kernel
linux-manual-3.16 / unregister_node(9): Unregister a node device
linux-manual-3.16 / unregister_sound_dsp(9): Unregister a dsp device
linux-manual-3.16 / unregister_sound_midi(9): Unregister a midi device
linux-manual-3.16 / unregister_sound_mixer(9): Unregister a mixer
linux-manual-3.16 / unregister_sound_special(9): Unregister a special sound device
linux-manual-3.16 / unregister_syscore_ops(9): Unregister a set of system core operations.
linux-manual-3.16 / update_sd_lb_stats(9): Update sched_domains statistics for load balancing.
linux-manual-3.16 / update_sd_pick_busiest(9): Return 1 on busiest group
linux-manual-3.16 / update_sg_lb_stats(9): Update sched_groups statistics for load balancing.
linux-manual-3.16 / upper_32_bits(9): Return bits 32-63 of a number
linux-manual-3.16 / usb_add_config(9): Add a configuration to a device.
linux-manual-3.16 / usb_add_function(9): Add a function to a configuration
linux-manual-3.16 / usb_add_hcd(9): Finish generic hcd structure initialization and register
linux-manual-3.16 / usb_alloc_coherent(9): Allocate dma-consistent buffer for urb_no_xxx_dma_map
linux-manual-3.16 / usb_alloc_streams(9): Allocate bulk endpoint stream ids.
linux-manual-3.16 / usb_alloc_urb(9): Creates a new urb for a usb driver to use
linux-manual-3.16 / usb_altnum_to_altsetting(9): Get the altsetting structure with a given alternate setting number.
linux-manual-3.16 / usb_anchor_empty(9): Is an anchor empty
linux-manual-3.16 / usb_anchor_resume_wakeups(9): Usb_anchor_resume_wakeups -
linux-manual-3.16 / usb_anchor_suspend_wakeups(9): Usb_anchor_suspend_wakeups -
linux-manual-3.16 / usb_anchor_urb(9): Anchors an urb while it is processed
linux-manual-3.16 / usb_autopm_get_interface(9): Increment a usb interfaces pm-usage counter
linux-manual-3.16 / usb_autopm_get_interface_async(9): Increment a usb interfaces pm-usage counter
linux-manual-3.16 / usb_autopm_get_interface_no_resume(9): Increment a usb interfaces pm-usage counter
linux-manual-3.16 / usb_autopm_put_interface(9): Decrement a usb interfaces pm-usage counter
linux-manual-3.16 / usb_autopm_put_interface_async(9): Decrement a usb interfaces pm-usage counter
linux-manual-3.16 / usb_autopm_put_interface_no_suspend(9): Decrement a usb interfaces pm-usage counter
linux-manual-3.16 / usb_block_urb(9): Reliably prevent further use of an urb
linux-manual-3.16 / usb_buffer_dmasync(9): Synchronize dma and cpu view of buffer(s)
linux-manual-3.16 / usb_buffer_dmasync_sg(9): Synchronize dma and cpu view of scatterlist buffer(s)
linux-manual-3.16 / usb_buffer_map(9): Create dma mapping(s) for an urb
linux-manual-3.16 / usb_buffer_map_sg(9): Create scatterlist dma mapping(s) for an endpoint
linux-manual-3.16 / usb_buffer_unmap(9): Free dma mapping(s) for an urb
linux-manual-3.16 / usb_buffer_unmap_sg(9): Free dma mapping(s) for a scatterlist
linux-manual-3.16 / usb_bulk_msg(9): Builds a bulk urb, sends it off and waits for completion
linux-manual-3.16 / usb_bus_start_enum(9): Start immediate enumeration (for otg)
linux-manual-3.16 / usb_calc_bus_time(9): Approximate periodic transaction time in nanoseconds
linux-manual-3.16 / usb_clear_halt(9): Tells device to clear endpoint halt/stall condition
linux-manual-3.16 / usb_composite_probe(9): Register a composite driver
linux-manual-3.16 / usb_composite_setup_continue(9): Continue with the control transfer
linux-manual-3.16 / usb_composite_unregister(9): Unregister a composite driver
linux-manual-3.16 / usb_control_msg(9): Builds a control urb, sends it off and waits for completion
linux-manual-3.16 / usb_copy_descriptors(9): Copy a vector of usb descriptors
linux-manual-3.16 / usb_create_hcd(9): Create and initialize an hcd structure
linux-manual-3.16 / usb_create_shared_hcd(9): Create and initialize an hcd structure
linux-manual-3.16 / usb_deregister(9): Unregister a usb interface driver
linux-manual-3.16 / usb_deregister_dev(9): Deregister a usb devices dynamic minor.
linux-manual-3.16 / usb_deregister_device_driver(9): Unregister a usb device (not interface) driver
linux-manual-3.16 / usb_descriptor_fillbuf(9): Fill buffer with descriptors
linux-manual-3.16 / usb_disable_autosuspend(9): Prevent a usb device from being autosuspended
linux-manual-3.16 / usb_driver_claim_interface(9): Bind a driver to an interface
linux-manual-3.16 / usb_driver_release_interface(9): Unbind a driver from an interface
linux-manual-3.16 / usb_driver_set_configuration(9): Provide a way for drivers to change device configurations
linux-manual-3.16 / usb_enable_autosuspend(9): Allow a usb device to be autosuspended
linux-manual-3.16 / usb_ep_align_maybe(9): Returns len aligned to eps maxpacketsize if gadget requires quirk_ep_out_aligned_size, otherwise reguens len.
linux-manual-3.16 / usb_ep_alloc_request(9): Allocate a request object to use with this endpoint
linux-manual-3.16 / usb_ep_clear_halt(9): Clears endpoint halt, and resets toggle
linux-manual-3.16 / usb_ep_dequeue(9): Dequeues (cancels, unlinks) an i/o request from an endpoint
linux-manual-3.16 / usb_ep_disable(9): Endpoint is no longer usable
linux-manual-3.16 / usb_ep_enable(9): Configure endpoint, making it usable
linux-manual-3.16 / usb_ep_fifo_flush(9): Flushes contents of a fifo
linux-manual-3.16 / usb_ep_fifo_status(9): Returns number of bytes in fifo, or error
linux-manual-3.16 / usb_ep_free_request(9): Frees a request object
linux-manual-3.16 / usb_ep_queue(9): Queues (submits) an i/o request to an endpoint.
linux-manual-3.16 / usb_ep_set_halt(9): Sets the endpoint halt feature.
linux-manual-3.16 / usb_ep_set_maxpacket_limit(9): Set maximum packet size limit for endpoint
linux-manual-3.16 / usb_ep_set_wedge(9): Sets the halt feature and ignores clear requests
linux-manual-3.16 / usb_fill_bulk_urb(9): Macro to help initialize a bulk urb
linux-manual-3.16 / usb_fill_control_urb(9): Initializes a control urb
linux-manual-3.16 / usb_fill_int_urb(9): Macro to help initialize a interrupt urb
linux-manual-3.16 / usb_find_alt_setting(9): Given a configuration, find the alternate setting for the given interface.
linux-manual-3.16 / usb_find_interface(9): Find usb_interface pointer for driver and device
linux-manual-3.16 / usb_for_each_dev(9): Iterate over all usb devices in the system
linux-manual-3.16 / usb_free_coherent(9): Free memory allocated with usb_alloc_coherent
linux-manual-3.16 / usb_free_descriptors(9): Free descriptors returned by usb_copy_descriptors
linux-manual-3.16 / usb_free_streams(9): Free bulk endpoint stream ids.
linux-manual-3.16 / usb_free_urb(9): Frees the memory used by a urb when all users of it are finished
linux-manual-3.16 / usb_function_activate(9): Allow function and gadget enumeration
linux-manual-3.16 / usb_function_deactivate(9): Prevent function and gadget enumeration
linux-manual-3.16 / usb_gadget_clear_selfpowered(9): Clear the device selfpowered feature.
linux-manual-3.16 / usb_gadget_config_buf(9): Builts a complete configuration descriptor
linux-manual-3.16 / usb_gadget_connect(9): Software-controlled connect to usb host
linux-manual-3.16 / usb_gadget_disconnect(9): Software-controlled disconnect from usb host
linux-manual-3.16 / usb_gadget_frame_number(9): Returns the current frame number
linux-manual-3.16 / usb_gadget_get_string(9): Fill out a string descriptor
linux-manual-3.16 / usb_gadget_probe_driver(9): Probe a gadget driver
linux-manual-3.16 / usb_gadget_set_selfpowered(9): Sets the device selfpowered feature.
linux-manual-3.16 / usb_gadget_unregister_driver(9): Unregister a gadget driver
linux-manual-3.16 / usb_gadget_vbus_connect(9): Notify controller that vbus is powered
linux-manual-3.16 / usb_gadget_vbus_disconnect(9): Notify controller about vbus session end
linux-manual-3.16 / usb_gadget_vbus_draw(9): Constrain controllers vbus power usage
linux-manual-3.16 / usb_gadget_wakeup(9): Tries to wake up the host connected to this gadget
linux-manual-3.16 / usb_get_current_frame_number(9): Return current bus frame number
linux-manual-3.16 / usb_get_descriptor(9): Issues a generic get_descriptor request
linux-manual-3.16 / usb_get_dev(9): Increments the reference count of the usb device structure
linux-manual-3.16 / usb_get_from_anchor(9): Get an anchors oldest urb
linux-manual-3.16 / usb_get_intf(9): Increments the reference count of the usb interface structure
linux-manual-3.16 / usb_get_status(9): Issues a get_status call
linux-manual-3.16 / usb_get_urb(9): Increments the reference count of the urb
linux-manual-3.16 / usb_gstrings_attach(9): Attach gadget strings to a cdev and assign ids
linux-manual-3.16 / usb_hc_died(9): Report abnormal shutdown of a host controller (bus glue)
linux-manual-3.16 / usb_hcd_check_unlink_urb(9): Check whether an urb may be unlinked
linux-manual-3.16 / usb_hcd_giveback_urb(9): Return urb from hcd to device driver
linux-manual-3.16 / usb_hcd_irq(9): Hook irqs to hcd framework (bus glue)
linux-manual-3.16 / usb_hcd_link_urb_to_ep(9): Add an urb to its endpoint queue
linux-manual-3.16 / usb_hcd_pci_probe(9): Initialize pci-based hcds
linux-manual-3.16 / usb_hcd_pci_remove(9): Shutdown processing for pci-based hcds
linux-manual-3.16 / usb_hcd_pci_shutdown(9): Shutdown host controller
linux-manual-3.16 / usb_hcd_resume_root_hub(9): Called by hcd to resume its root hub
linux-manual-3.16 / usb_hcd_unlink_urb_from_ep(9): Remove an urb from its endpoint queue
linux-manual-3.16 / usb_hub_clear_tt_buffer(9): Clear control/bulk tt state in high speed hub
linux-manual-3.16 / usb_hub_find_child(9): Get the pointer of child device attached to the port which is specified by port1.
linux-manual-3.16 / usb_hub_for_each_child(9): Iterate over all child devices on the hub
linux-manual-3.16 / usb_ifnum_to_if(9): Get the interface object with a given interface number
linux-manual-3.16 / usb_init_urb(9): Initializes a urb so that it can be used by a usb driver
linux-manual-3.16 / usb_interface_claimed(9): Returns true iff an interface is claimed
linux-manual-3.16 / usb_interface_id(9): Allocate an unused interface id
linux-manual-3.16 / usb_interrupt_msg(9): Builds an interrupt urb, sends it off and waits for completion
linux-manual-3.16 / usb_kill_anchored_urbs(9): Cancel transfer requests en masse
linux-manual-3.16 / usb_kill_urb(9): Cancel a transfer request and wait for it to finish
linux-manual-3.16 / usb_lock_device_for_reset(9): Cautiously acquire the lock for a usb device structure
linux-manual-3.16 / usb_make_path(9): Returns stable device path in the usb tree
linux-manual-3.16 / usb_match_id(9): Find first usb_device_id matching device or interface
linux-manual-3.16 / usb_poison_anchored_urbs(9): Cease all traffic from an anchor
linux-manual-3.16 / usb_poison_urb(9): Reliably kill a transfer and prevent further use of an urb
linux-manual-3.16 / usb_put_dev(9): Release a use of the usb device structure
linux-manual-3.16 / usb_put_intf(9): Release a use of the usb interface structure
linux-manual-3.16 / usb_queue_reset_device(9): Reset a usb device from an atomic context
linux-manual-3.16 / usb_register_dev(9): Register a usb device, and ask for a minor number
linux-manual-3.16 / usb_register_device_driver(9): Register a usb device (not interface) driver
linux-manual-3.16 / usb_register_driver(9): Register a usb interface driver
linux-manual-3.16 / usb_remove_hcd(9): Shutdown processing for generic hcds
linux-manual-3.16 / usb_reset_configuration(9): Lightweight device reset
linux-manual-3.16 / usb_reset_device(9): Warn interface drivers and perform a usb port reset
linux-manual-3.16 / usb_reset_endpoint(9): Reset an endpoints state.
linux-manual-3.16 / usb_root_hub_lost_power(9): Called by hcd if the root hub lost vbus power
linux-manual-3.16 / usb_scuttle_anchored_urbs(9): Unanchor all an anchors urbs
linux-manual-3.16 / usb_set_device_state(9): Change a devices current state (usbcore, hcds)
linux-manual-3.16 / usb_set_interface(9): Makes a particular alternate setting be current
linux-manual-3.16 / usb_sg_cancel(9): Stop scatter/gather i/o issued by usb_sg_wait
linux-manual-3.16 / usb_sg_init(9): Initializes scatterlist-based bulk/interrupt i/o request
linux-manual-3.16 / usb_sg_wait(9): Synchronously execute scatter/gather request
linux-manual-3.16 / usb_speed_string(9): Returns human readable-name of the speed.
linux-manual-3.16 / usb_state_string(9): Returns human readable name for the state.
linux-manual-3.16 / usb_string(9): Returns utf-8 version of a string descriptor
linux-manual-3.16 / usb_string_id(9): Allocate an unused string id
linux-manual-3.16 / usb_string_ids_n(9): Allocate unused string ids in batch
linux-manual-3.16 / usb_string_ids_tab(9): Allocate unused string ids in batch
linux-manual-3.16 / usb_submit_urb(9): Issue an asynchronous transfer request for an endpoint
linux-manual-3.16 / usb_unanchor_urb(9): Unanchors an urb
linux-manual-3.16 / usb_unlink_anchored_urbs(9): Asynchronously cancel transfer requests en masse
linux-manual-3.16 / usb_unlink_urb(9): Abort/cancel a transfer request for an endpoint
linux-manual-3.16 / usb_unpoison_anchored_urbs(9): Let an anchor be used successfully again
linux-manual-3.16 / usb_urb_dir_in(9): Check if an urb describes an in transfer
linux-manual-3.16 / usb_urb_dir_out(9): Check if an urb describes an out transfer
linux-manual-3.16 / usb_wait_anchor_empty_timeout(9): Wait for an anchor to be unused
linux-manual-3.16 / usleep_range(9): Drop in replacement for udelay where wakeup is flexible
linux-manual-3.16 / vbin_printf(9): Parse a format string and place args binary value in a buffer
linux-manual-3.16 / verify_bbt_descr(9): Verify the bad block description
linux-manual-3.16 / vfree(9): Release memory allocated by vmalloc
linux-manual-3.16 / vfs_cancel_lock(9): File byte range unblock lock
linux-manual-3.16 / vfs_link(9): Create a new link
linux-manual-3.16 / vfs_lock_file(9): File byte range lock
linux-manual-3.16 / vfs_path_lookup(9): Lookup a file path relative to a dentry-vfsmount pair
linux-manual-3.16 / vfs_rename(9): Rename a filesystem object
linux-manual-3.16 / vfs_setlease(9): Sets a lease on an open file
linux-manual-3.16 / vfs_test_lock(9): Test file byte range lock
linux-manual-3.16 / vfs_unlink(9): Unlink a filesystem object
linux-manual-3.16 / virt_to_phys(9): Map virtual addresses to physical
linux-manual-3.16 / vm_insert_page(9): Insert single page into user vma
linux-manual-3.16 / vm_insert_pfn(9): Insert single pfn into user vma
linux-manual-3.16 / vm_iomap_memory(9): Remap memory to userspace
linux-manual-3.16 / vm_map_ram(9): Map pages linearly into kernel virtual address (vmalloc space)
linux-manual-3.16 / vm_unmap_aliases(9): Unmap outstanding lazy aliases in the vmap layer
linux-manual-3.16 / vm_unmap_ram(9): Unmap linear kernel address space set up by vm_map_ram
linux-manual-3.16 / vmalloc(9): Allocate virtually contiguous memory
linux-manual-3.16 / vmalloc_32(9): Allocate virtually contiguous memory (32bit addressable)
linux-manual-3.16 / vmalloc_32_user(9): Allocate zeroed virtually contiguous 32bit memory
linux-manual-3.16 / vmalloc_node(9): Allocate memory on a specific node
linux-manual-3.16 / vmalloc_user(9): Allocate zeroed virtually contiguous memory for userspace
linux-manual-3.16 / vmap(9): Map an array of pages into virtually contiguous space
open-vm-tools / vmhgfs(9): Vmware kernel module
open-vm-tools / vmxnet(9): Vmware kernel module
linux-manual-3.16 / vscnprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / vsnprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / vsprintf(9): Format a string and place it in a buffer
linux-manual-3.16 / vsscanf(9): Unformat a buffer into a list of arguments
linux-manual-3.16 / vunmap(9): Release virtual mapping obtained by vmap
linux-manual-3.16 / vzalloc(9): Allocate virtually contiguous memory with zero fill
linux-manual-3.16 / vzalloc_node(9): Allocate memory on a specific node with zero fill
linux-manual-3.16 / w1_add_master_device(9): Registers a new master device
linux-manual-3.16 / w1_next_pullup(9): Register for a strong pullup
linux-manual-3.16 / w1_post_write(9): Post-write options
linux-manual-3.16 / w1_pre_write(9): Pre-write operations
linux-manual-3.16 / w1_process_callbacks(9): Execute each dev-async_list callback entry
linux-manual-3.16 / w1_read_8(9): Reads 8 bits.
linux-manual-3.16 / w1_read_bit(9): Generates a write-1 cycle and samples the level.
linux-manual-3.16 / w1_read_block(9): Reads a series of bytes.
linux-manual-3.16 / w1_register_family(9): Register a device family driver
linux-manual-3.16 / w1_remove_master_device(9): Unregister a master device
linux-manual-3.16 / w1_reset_bus(9): Issues a reset bus sequence.
linux-manual-3.16 / w1_reset_resume_command(9): Resume instead of another match rom
linux-manual-3.16 / w1_reset_select_slave(9): Reset and select a slave
linux-manual-3.16 / w1_search(9): Performs a rom search & registers any devices found.
linux-manual-3.16 / w1_touch_bit(9): Generates a write-0 or write-1 cycle and samples the level.
linux-manual-3.16 / w1_touch_block(9): Touches a series of bytes.
linux-manual-3.16 / w1_triplet(9): * does a triplet - used for searching rom addresses.
linux-manual-3.16 / w1_unregister_family(9): Unregister a device family driver
linux-manual-3.16 / w1_write_8(9): Writes 8 bits.
linux-manual-3.16 / w1_write_bit(9): Generates a write-0 or write-1 cycle.
linux-manual-3.16 / w1_write_block(9): Writes a series of bytes.
linux-manual-3.16 / wait_event(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_cmd(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_hrtimeout(9): Sleep until a condition gets true or a timeout elapses
linux-manual-3.16 / wait_event_interruptible(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_interruptible_exclusive_locked(9): Sleep exclusively until a condition gets true
linux-manual-3.16 / wait_event_interruptible_exclusive_locked_irq(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_interruptible_hrtimeout(9): Sleep until a condition gets true or a timeout elapses
linux-manual-3.16 / wait_event_interruptible_lock_irq(9): Sleep until a condition gets true. the condition is checked under the lock. this is expected to be called with the lock taken.
linux-manual-3.16 / wait_event_interruptible_lock_irq_cmd(9): Sleep until a condition gets true. the condition is checked under the lock. this is expected to be called with the lock taken.
linux-manual-3.16 / wait_event_interruptible_lock_irq_timeout(9): Sleep until a condition gets true or a timeout elapses. the condition is checked under the lock. this is expected to be called with the lock taken.
linux-manual-3.16 / wait_event_interruptible_locked(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_interruptible_locked_irq(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_interruptible_timeout(9): Sleep until a condition gets true or a timeout elapses
linux-manual-3.16 / wait_event_killable(9): Sleep until a condition gets true
linux-manual-3.16 / wait_event_lock_irq(9): Sleep until a condition gets true. the condition is checked under the lock. this is expected to be called with the lock taken.
linux-manual-3.16 / wait_event_lock_irq_cmd(9): Sleep until a condition gets true. the condition is checked under the lock. this is expected to be called with the lock taken.
linux-manual-3.16 / wait_event_timeout(9): Sleep until a condition gets true or a timeout elapses
linux-manual-3.16 / wait_for_device_probe(9): Wait_for_device_probe -
linux-manual-3.16 / wait_for_stable_page(9): Wait for writeback to finish, if necessary.
linux-manual-3.16 / wait_on_atomic_t(9): Wait for an atomic_t to become 0
linux-manual-3.16 / wait_on_bit(9): Wait for a bit to be cleared
linux-manual-3.16 / wait_on_bit_lock(9): Wait for a bit to be cleared, when wanting to set it
linux-manual-3.16 / wait_task_stopped(9): Wait for task_stopped or task_traced
linux-manual-3.16 / wake_up_atomic_t(9): Wake up a waiter on a atomic_t
linux-manual-3.16 / wake_up_bit(9): Wake up a waiter on a bit
linux-manual-3.16 / wake_up_process(9): Wake up a specific process
linux-manual-3.16 / wakeup_readers(9): Wake up readers waiting on a channel
linux-manual-3.16 / wdev_priv(9): Return wiphy priv from wireless_dev
linux-manual-3.16 / wimax_dev_add(9): Register a new wimax device
linux-manual-3.16 / wimax_dev_init(9): Initialize a newly allocated instance
linux-manual-3.16 / wimax_dev_rm(9): Unregister an existing wimax device
linux-manual-3.16 / wimax_msg(9): Send a message to user space
linux-manual-3.16 / wimax_msg_alloc(9): Create a new skb for sending a message to userspace
linux-manual-3.16 / wimax_msg_data(9): Return a pointer to a messages payload
linux-manual-3.16 / wimax_msg_data_len(9): Return a pointer and size of a messages payload
linux-manual-3.16 / wimax_msg_len(9): Return a messages payload length
linux-manual-3.16 / wimax_msg_send(9): Send a pre-allocated message to user space
linux-manual-3.16 / wimax_report_rfkill_hw(9): Reports changes in the hardware rf switch
linux-manual-3.16 / wimax_report_rfkill_sw(9): Reports changes in the software rf switch
linux-manual-3.16 / wimax_reset(9): Reset a wimax device
linux-manual-3.16 / wimax_rfkill(9): Set the software rf switch state for a wimax device
linux-manual-3.16 / wimax_state_change(9): Set the current state of a wimax device
linux-manual-3.16 / wimax_state_get(9): Return the current state of a wimax device
linux-manual-3.16 / wiphy_apply_custom_regulatory(9): Apply a custom driver regulatory domain
linux-manual-3.16 / wiphy_dev(9): Get wiphy dev pointer
linux-manual-3.16 / wiphy_free(9): Free wiphy
linux-manual-3.16 / wiphy_name(9): Get wiphy name
linux-manual-3.16 / wiphy_new(9): Create a new wiphy for use with cfg80211
linux-manual-3.16 / wiphy_priv(9): Return priv from wiphy
linux-manual-3.16 / wiphy_register(9): Register a wiphy with cfg80211
linux-manual-3.16 / wiphy_rfkill_set_hw_state(9): Notify cfg80211 about hw block state
linux-manual-3.16 / wiphy_rfkill_start_polling(9): Start polling rfkill
linux-manual-3.16 / wiphy_rfkill_stop_polling(9): Stop polling rfkill
linux-manual-3.16 / wiphy_unregister(9): Deregister a wiphy from cfg80211
linux-manual-3.16 / work_busy(9): Test whether a work is currently pending or running
linux-manual-3.16 / work_on_cpu(9): Run a function in user context on a particular cpu
linux-manual-3.16 / workqueue_congested(9): Test whether a workqueue is congested
linux-manual-3.16 / workqueue_set_max_active(9): Adjust max_active of a workqueue
linux-manual-3.16 / wq_has_sleeper(9): Check if there are any waiting processes
linux-manual-3.16 / write_bbt(9): [generic] (re)write the bad block table
linux-manual-3.16 / write_cache_pages(9): Walk the list of dirty pages of the given address space and write all of them.
linux-manual-3.16 / write_inode_now(9): Write an inode to disk
linux-manual-3.16 / write_one_page(9): Write out a single page and optionally wait on i/o
linux-manual-3.16 / write_zsctrl(9): Write to a z8530 control register
linux-manual-3.16 / write_zsdata(9): Write to a z8530 control register
linux-manual-3.16 / write_zsreg(9): Write to a z8530 channel register
linux-manual-3.16 / writeback_in_progress(9): Determine whether there is writeback in progress
linux-manual-3.16 / writeback_inodes_sb(9): Writeback dirty inodes from given super_block
linux-manual-3.16 / writeback_inodes_sb_nr(9): Writeback dirty inodes from given super_block
linux-manual-3.16 / ww_mutex_unlock(9): Release the w/w mutex
linux-manual-3.16 / xdr_buf_subsegment(9): Set subbuf to a portion of buf
linux-manual-3.16 / xdr_buf_trim(9): Lop at most len bytes off the end of buf
linux-manual-3.16 / xdr_commit_encode(9): Ensure all data is written to buffer
linux-manual-3.16 / xdr_encode_opaque(9): Encode variable length opaque data
linux-manual-3.16 / xdr_encode_opaque_fixed(9): Encode fixed length opaque data
linux-manual-3.16 / xdr_enter_page(9): Decode data from the xdr page
linux-manual-3.16 / xdr_init_decode(9): Initialize an xdr_stream for decoding data.
linux-manual-3.16 / xdr_init_decode_pages(9): Initialize an xdr_stream for decoding data.
linux-manual-3.16 / xdr_init_encode(9): Initialize a struct xdr_stream for sending data.
linux-manual-3.16 / xdr_inline_decode(9): Retrieve xdr data to decode
linux-manual-3.16 / xdr_partial_copy_from_skb(9): Copy data out of an skb
linux-manual-3.16 / xdr_read_pages(9): Ensure page-based xdr data to decode is aligned at current pointer position
linux-manual-3.16 / xdr_reserve_space(9): Reserve buffer space for sending
linux-manual-3.16 / xdr_restrict_buflen(9): Decrease available buffer space
linux-manual-3.16 / xdr_set_scratch_buffer(9): Attach a scratch buffer for decoding data.
linux-manual-3.16 / xdr_skb_read_bits(9): Copy some data bits from skb to internal buffer
linux-manual-3.16 / xdr_stream_pos(9): Return the current offset from the start of the xdr_stream
linux-manual-3.16 / xdr_terminate_string(9): 0-terminate a string residing in an xdr_buf
linux-manual-3.16 / xdr_truncate_encode(9): Truncate an encode buffer
linux-manual-3.16 / xdr_write_pages(9): Insert a list of pages into an xdr buffer for sending
linux-manual-3.16 / xprt_adjust_cwnd(9): Adjust transport congestion window
linux-manual-3.16 / xprt_complete_rqst(9): Called when reply processing is complete
linux-manual-3.16 / xprt_disconnect_done(9): Mark a transport as disconnected
linux-manual-3.16 / xprt_load_transport(9): Load a transport implementation
linux-manual-3.16 / xprt_lookup_rqst(9): Find an rpc request corresponding to an xid
linux-manual-3.16 / xprt_register_transport(9): Register a transport implementation
linux-manual-3.16 / xprt_release_rqst_cong(9): Housekeeping when request is complete
linux-manual-3.16 / xprt_release_xprt(9): Allow other requests to use a transport
linux-manual-3.16 / xprt_release_xprt_cong(9): Allow other requests to use a transport
linux-manual-3.16 / xprt_reserve_xprt(9): Serialize write access to transports
linux-manual-3.16 / xprt_set_retrans_timeout_def(9): Set a requests retransmit timeout
linux-manual-3.16 / xprt_set_retrans_timeout_rtt(9): Set a requests retransmit timeout
linux-manual-3.16 / xprt_unregister_transport(9): Unregister a transport implementation
linux-manual-3.16 / xprt_wait_for_buffer_space(9): Wait for transport output buffer to clear
linux-manual-3.16 / xprt_wake_pending_tasks(9): Wake all tasks on a transports pending queue
linux-manual-3.16 / xprt_write_space(9): Wake the task waiting for transport output buffer space
linux-manual-3.16 / yield(9): Yield the current processor to other threads.
linux-manual-3.16 / yield_to(9): Yield the current processor to another thread in your thread group, or accelerate that thread toward the processor its on.
linux-manual-3.16 / z8530_channel_load(9): Load channel data
linux-manual-3.16 / z8530_describe(9): Uniformly describe a z8530 port
linux-manual-3.16 / z8530_dma_rx(9): Handle a dma rx event
linux-manual-3.16 / z8530_dma_status(9): Handle a dma status exception
linux-manual-3.16 / z8530_dma_tx(9): Handle a dma tx event
linux-manual-3.16 / z8530_flush_fifo(9): Flush on chip rx fifo
linux-manual-3.16 / z8530_init(9): Initialise a z8530 device
linux-manual-3.16 / z8530_interrupt(9): Handle an interrupt from a z8530
linux-manual-3.16 / z8530_null_rx(9): Discard a packet
linux-manual-3.16 / z8530_queue_xmit(9): Queue a packet
linux-manual-3.16 / z8530_read_port(9): Architecture specific interface function
linux-manual-3.16 / z8530_rtsdtr(9): Control the outgoing dts/rts line
linux-manual-3.16 / z8530_rx(9): Handle a pio receive event
linux-manual-3.16 / z8530_rx_clear(9): Handle rx events from a stopped chip
linux-manual-3.16 / z8530_rx_done(9): Receive completion callback
linux-manual-3.16 / z8530_shutdown(9): Shutdown a z8530 device
linux-manual-3.16 / z8530_status(9): Handle a pio status exception
linux-manual-3.16 / z8530_status_clear(9): Handle status events from a stopped chip
linux-manual-3.16 / z8530_sync_close(9): Close a pio z8530 channel
linux-manual-3.16 / z8530_sync_dma_close(9): Close down dma i/o
linux-manual-3.16 / z8530_sync_dma_open(9): Open a z8530 for dma i/o
linux-manual-3.16 / z8530_sync_open(9): Open a z8530 channel for pio
linux-manual-3.16 / z8530_sync_txdma_close(9): Close down a tx driven dma channel
linux-manual-3.16 / z8530_sync_txdma_open(9): Open a z8530 for tx driven dma
linux-manual-3.16 / z8530_tx(9): Handle a pio transmit event
linux-manual-3.16 / z8530_tx_begin(9): Begin packet transmission
linux-manual-3.16 / z8530_tx_clear(9): Handle tx events from a stopped chip
linux-manual-3.16 / z8530_tx_done(9): Tx complete callback
linux-manual-3.16 / z8530_write_port(9): Architecture specific interface function
linux-manual-3.16 / zap_vma_ptes(9): Remove ptes mapping the vma
linux-manual-3.16 / zerocopy_sg_from_iovec(9): Build a zerocopy datagram from an iovec

Kernel routines (9)